Construction of Kitchen Shed in Thiruverumbur Block in Tiruchirappalli District under RCSIDS 2019-20 Package No.6

Amount

Construction of Kitchen shed at PUE School at Ottakudi in Keelamullakudi Panchayat Earthwork excavation for foundation in all soils and subsoils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and baling out water wherever necessary etc complete complying with relevant standard specfication

Supplying and Filling in foundation and basement with filling river sand in layers of not more than 15cm tk well rammed watered and compacted including conveyance and all labour charges

Cement concrete 1:4:8 mix using 40mm ISS HBG metal for foundation and flooring including labour charges etc

Brickwork in CM 1:5 using country bricks ground moulded of size 23x11x7 cm including cost and conveyance of all materials etc

Supplying and erecting centering for sides centering for soffits of RCC slabs of plain surfaces like lintel,beams etc including strutting 3m high using mild steel sheets of size 90 cm x 60 cm x and BG 10 stiffened with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joints of size 10cm x 6.5cm x (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13 cm dia (spaced at 75cm c/c) complying with standard specification Below GL

Above GL

Supplying and fabricating and placing in position of ribbed tor steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc

RCC 1:1.5:3 mix using 20mm ISS HBG metal for RCC item of work excluding items of works excluding centering, shuttering and cost of reinforcement grill but including curing etc complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer in Ground Floor

Fabricating supply and fixing and position of MS doors with single leave. The outer frame will be 40x40x6mm MS angle the shutter frame will be 35x35x6mm MS angle intermediate stiffner will be 35x35x6mm with cross stiffener 25x25x5mm flats covered with 18 gauge MS sheet with necessary hinges, tower bolts, aldrop length 30cm and hold fast etc complete with one coat red oxide primer Door size 0.90 m x 2.10m

Fabricating supply and fixing and position of MS doors with single leave. The outer frame will be 40x40x6mm MS angle the shutter frame will be 35x35x6mm MS angle intermediate stiffner will be 35x35x6mm with cross stiffener 25x25x5mm flats covered with 18 gauge MS sheet with necessary hinges, tower bolts, aldrop length 30cm and hold fast etc complete with one coat red oxide primer Door size 1.10 m x 2.10m

Fabricating Supply and fixing and position of MS windows with two leave. The window outer frame will be 35x35x6mm angle, the shutter frame will be 25mmx25mmx6mm MS angle intermediate stiffener will be 25x25x6mm with cross stiffener 25x25x5mm flats covered with 18 gauge MS sheet with necessary hinges, tower bolts, aldrop and hold fast etc complete with one Window of size 1.20m x 1.20m

Plastering surfaces of RCC items such as slabs, beams, sunshades with cement mortar 1:3-10mm tk including packing, providing cement mortar beading for sunshades staircase steps landing slabs etc as directed by departmental officers etc complete complying with standard specifications

Plastering with CM 1:5 mix to 12mm thick including cost and conveyance of all materials in all floors etc as directed by departmental officers etc complete complying with standard specifications.

Providing granolythic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc

Weathering course using best quality of shell lime approved quality laid in CM 1:3 mix 12mm tk over RCC roof slab etc complete

Providing one coarse of pressed tiles of approved quality laid in CM 1:3 mix 12mm tk over RCC roof slab etc complete

White washing two coats using shell lime including cost and conveyance of all materials

Distembering two coats of oil bound distember using one coat of primer coat including cost and conveyance to size and all labour charges etc complete

Painting two coat exterior emulsion using one coat of primer including cost and conveyance to size and all labour charges etc complete

Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost of all materials etc complete in all floors

Providing Electrical arrangements Light point (SD 18)

Supply and fixing of single tube light flu fitting complete with copper choke SD 88

CFL light fitting

Rain water pipe 90mm pvc pipe

PVC cap

25mm PVC pipe

Provision for name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R RENGARAJAN