Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹8.1 L+₹2.4 L (43.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) Dharamshala
AGE(I) Dharamshala PIN-176216
Welcome maintenance to married accn at Mil Stn Dharamshala
2023_MES_599522_1
AGE(I)/DSL-11/2023-24
Open Tender
Civil Works
Item Rate
180 days
AGE(I) Dharamshala
As per NIT
7 documents required · 7 mandatory
₹500
AGE(I) Dharamshala
₹18,000
Yes
31 Aug 2023
30 May 2023
4 Jul 2023
30 May 2023
27 Jun 2023
13 Jun 2023
Amount
Taking down chokhats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.
Taking down chokhats or frames including shutters (without taking off shutters from the frame) exc. 1.5 but not exc. 4 Sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.
Taking down shutters not exc. 1.0 Sqm and removing from site, complete all as specified and directed by Engr-in-Charge.
Taking down shutters exc. 1.0 Sqm but not exc. 2.0 Sqm each and removing from site, complete all as specified and directed by Engr-in-Charge.
M&L for taking down shutter of any description exc. 1.0 sqm and not exc 2.0 Sqm each and refixing in same opening after easing and adjusting, complete all as specified and directed by Engr-in-Charge.
2nd class hard wood (Sal/Hollock) plain, solid, straight chowkhats or frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned at joints with one or more rebates, complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick Ist class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge.
Factory made 2nd class hard wood (Sal/Hollock) plain, framed, panelled 35mm thick shutters (two panels ) with lock rail and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-Charge.
Aluminium, anodised, barrel tower bolts of extruded section and fixed with 150mm long bolt, complete all as specified and directed by Engr-in-Charge.
Aluminium, anodised, barrel tower bolts of extruded section and fixed with 100mm long bolt, complete all as specified and directed by Engr-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 100 mm long, complete all as specified and directed by Engr-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 75 mm long, complete all as specified and directed by Engr-in-Charge.
Anodized aluminium alloy handles, fabricated type, anodised or size 150mm, complete all as specified and directed by Engr-in-Charge.
Anodized aluminium alloy handles, fabricated type, anodised or size 100mm, complete all as specified and directed by Engr-in-Charge.
300mm long anodized aluminium alloy sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 16mm dia, with and including a minimum of 6 bolts and nots, 4 on bolt plate and 2 on stapple plate, 300mm long, complete all as specified and directed by Engr-in-Charge.
Sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beads in squares, not exc. 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.
S&F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty not exc 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge.
S&F soap dish any type fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.
Mild steel galvanized wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks or wire staples or wooden beads, fixed in repair, complete all as specified and directed by Engr-in-Charge.
Preparing wood surface and wood based materials or any description and girth, not otherwise described, and treated with one coat of creosote oil, complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick plastering in cement mortar 1:4 on stone masonry surfaces or other than fair faces of brick surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed by Engr-in-Charge.
Preparation of newly plastered wall surfaces and applying two coats of cement base paint including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening preparatory to distempering including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling incl cement mortar bedding, complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C2 using 40mm graded aggregate for subbase, complete all as specified and directed by Engr-in-Charge.
PCC M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in floors, 25mm thick, finished even and rough to receive floor finishes, complete all as specified and directed by Engr-in-Charge.
S&F vitrified ceremic coloured dark shades tiles, 10mm thick (Square/rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layerr in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
Mat finish (non skid), Premium class I grade, coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
Glazed ceramic tiles, Premium class I grade, coloured of size 300mmx600mm/450x300mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick beddin layer in cement mortar 1:4 on surfaces of walls, complete all as specified and directed by Engr-in-Charge.
Chequered cement concrete tiles machine pressed heavy duty glossy tiles of size 30cm x 30cm x 25mm thick set jointed & pointed in neat cement slurry in floors with Grey cement and pigment laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.
PVC valve less, syphonic action type flushing cistern 10 liter capacity, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450mm long PVC connection at both ends complete all as specified and directed by Engr-in-Charge.
Vitreous Chinaware wash down water closet (Pedestal pattern) white including connection to drain and flush pipe seat and seat cover, CP jet and pipe complete all as specified, excluding flushing cistern and flush pipe), complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore CP angle valve cast copper screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge.
Preparation of old surfaces plastered or unplastered wall surfaces including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and eflllorescent salts and treating oil and greasy spots etc and applying one coat of white wash on walls, complete all as specified and directed by Engr-in-Charge.
All as per item No. 37 here-in-before but one coat of white wash on ceiling, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old decorated plastered or unplastered wall surfaces including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat of distemper oil emulsion on wall, complete all as specified and directed by Engr-in-Charge.
All as per item No. 39 here-in-before but two coats of oil bound distemper on walls, complete all as specified and directed by Engr-in-Charge.
Complete removal of existing treatment incl washing rubbing down and stopping of white wash/colour wash/cement base paint/synthetic enamel paint of wall surface, complete all as specified and directed by Engr-in-Charge.
Preparation of old plastered wall surfaces and applying two coats of cement base paint including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.
Preparation of old surfaces of wall etc and applying one coat of all weather exterior paint , complete all as specified and as directed by Engr-in-Charge.
Preparation of old painted wooden surfaces of any description and otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engr-in-Charge.
Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engr-in-Charge.
S&F 25mm dia CP curtain rods with side CP globes and CP brackets, complete all as specified and directed by Engr-in-Charge.
Ms Sunil Kumar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .