REPAIR TO FURNITURE AT MD AND OTM ACCN AT DGRE RDC, MANALI

Amount

Repair & painting to ALMIRAH STEEL LARGE-Drg No-FD- 1032

Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as per drg and specified and directed..

M&L for welding to steel Almirah large where required not exceeding 2.5cm in length of all as per Drg and specified and directed.

Removing of old unserviceable /broken legs and S &F new legs out of 1.00 mm thick PBI Sheet complete all as shown on Drg and specified and directed.

Removing of old unserviceable locks and S&F new locks to steel Almirah large best quality (as per existing size) as approved by Engineer Incharge complete all as per Drg and specified and directed.

All as per Srl item No 1.4 above but CP Handle (as per existing size)

Removing of old unserviceable paints and repainting of steel Almirah large with two coat of synthetic enamel paint in side and out side including prep. of surfaces complete all as per Drg and specified and directed..

Repair & painting to BOOK CASE STEELFD- 90, FD- 1028.

Removing of old unserviceable Broken glass of shutter and S&F of new glass 5mm thick as per existing size fixing to the shutter of book case complete all as per Drg and specified and directed.

Removing of old unserviceable lock and S&F of new locks in book case all are operated by one key only complete all as shown Drg and directed and specified.

Removing of old unserviceable bow handle of the shutter and S&F new CP bow handle of same size complete as per Drg and specified and directed.

M&L for preparation of surfaces by removing of old paint, rust and dust and applying two coats of synthetic enamel paint OG complete all as specified drg, as directed.

Repair to Chair varandah Drg No-FD-256

Recanning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg including two coats of white synthetic enamel paint to Chair Varandah complete all as specified and directed (Painting to chair will be carried out before recanning)

S&F hard rubber shoes suitable for chair Varandah complete, all as specified and directed.

M&L for preparation of surfaces by removing of old paint, rust and dust and applying white synthetic enamel paint to Chair Varandah complete all as specified and directed

Repair to Chair Easy, Drg No FD-202 & FD-250

M&L for Polishing to chair easy complete all as per drg, as specified and as directed.

Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.

Repair to Charpoy GI pipe top plywood/Niwar Drg NO-FD-220

Removing of old unserviceable plywood sheet/Niwar., tightening of loose check nuts,elbows, rails legs etc i.e tightening of complete charpoy and S&F of plywood of size 2000mmx900mmx12mm thick BWR and 2 Nos of MS flat 40mm x4mm x 900mm long to be welded at different points of the charpoy, 14 Nos nuts bolts (GI) 75mm long 6mm dia with washer after making in the pipe at different points complete all as specified and directed

Dismantling of old broken threaded long rail and S&F new long rail of GI tubing 32 mm bore medium grade 1900 mm long duly threaded at both ends and fixing in position complete all as per drg and as specified and as directed .

Removing of old unserviceable short rail and provn of short rails ( Long rail obtained from Srl item 6.2 shall be modified into 2 pieces of short rail by cutting threading etc)and fixing in position complete all as shown on drg and as specified and as directed

Removing of old unserviceable legs and provn of legs (short rail obtained from Srl item 6.3 shall be modified into 2 pieces of legs by cutting threading etc) including 2 Nos clamps for MNF set made cut out of flat iron 25x3mm and welding to the legs and Provn of base plate 3mm thick 50mm dia welded to bottom of leg complete all as shown on drg and specified .

Removing of old unserviceable 32 mm dia GI elbow and S&F new 32 mm bore GI elbow 3 way Med gde of best quality as shown on drg complete all as specified and directed

Removing of old unserviceable 32 mm dia GI check nuts and S&F new check nuts 6 mm thick suitable for 32mm bore GI tubing med grade of best quality as shown on drg complete all as specified and directed

S&F 32mm plug for legs of charpoy complete all as specified and directed

Repair to chair tubular with / Wo arms

S&F in replacement seat and back made of hard wood and canning with plastic cane white ,2mm wide with border of 3 mm in Godrej pattern.

S&F mild steel flat iron 15 x 3x500mm at front and rear side for stay of seats with two holes for fixing of seat duly welded complete all as specified directed.

S&F in replacement wooden handle fixed in position with screws .

M&L for painting to steel frame with synthetic enamel paint one coat.

Repair to Sofa Set 5 Seater :- TP

S&F in replacement of sheet back 50mm, seat & arms 20mm thick of 32 density foam ( Make:Godrej/Sleep well/coir foam ) ,covered velvet cloth not less Rs.350 per mtr as per sample approved by EIC.relacement of cotton teas ,linning cloth ,haison cloth,cotton dory.

French polishing to all exposed wooden surfaces complete all as specified.

Replacement of leg with shesham wood leg of appropriate size

S&F in replacement copper coated spring 6" high quality

S&F in replacement copper coated spring 4" high quality

S&F in replacement 100 mm thick cushion seat (size 21"X22") of 32 density foam ( Make:Godrej/Sleep well ) covered velvet cloth not less Rs.350 per mtr as per sample approved by EIC

Repair to CHAIR DINING TP

S&F in Replacement of 50mm thick cushion seat of size 18"x18" of 32 density ( Make:Godrej/Sleep well, coirfoam), covered with good quality tapestry Cloth not less than Rs 350/- mtr as per sample approved by EIC.

S&F in Replacement of 20 mm thick cushion back of size 9"x14" of 32 density foam ( Make:Godrej/Sleep well, coirfoam), covered with good quality tapestry cloth not less than Rs.350/-mtr as per sample approved by EIC.

French polishing to all exposed wooden surface.

Repair to Chair Computer/ (Revolving)/Study Chair Drg No- TP

S&F in replacement high quality PVC chair wheel.

S&F in replacement 50 mm thick cushion seat and back 32 density foam and cover with approved quality cloth.

S&F in replacement wheel stand including wheels complete all as per directed

M&L for spray with two coat of synthetic enamel paint ete completed all as directed.

Anil Kumar (BID ID -3202016)

Kanishka Engineers (BID ID -3202024)