Renovation Up gradation of UG cable and feeder Pillars panels etc at BSF Campus Gandhinagar Ftr HQ BSF Gujarat SH Providing and fixing of Junction Box MCCB laying suitable size of cable and Changeover to strengthening the electrical system

Amount

S.I.T.C of CPRI & IEC 61439 approved cubical junction box (double door), dust and vermin proof made out of 2 mm thick CRCA sheet of nominal size 500 mm length x 500 mm height x 400 mm depth, front and back openable- hinged type door, duly eposy based powder coated (from inside and outside), 4 strip 200 Amp capacity PVC Insulated aluminium Bus bar, provision of 4 pole terminal block for incoming and outgoing cables and fixed on M S angle iron frame work of size 40 mmx 40 mmx 6 mm length with 4 nos. 750 mm long legs duly welded to the frame structure and out of which 300 mm will be grounded in 1:2: 4 cement concrete foundation i/c connection and interconnection, inter locking wiring, thimbling, numbering-ferrules up & lowering system, earthing stud etc. complete as reqd.

SITC of Four Pole On load change over switch I-O-II in existing panel of capacity 200 Amp suitable for 415 V, 50 Hz Make- Havells - IHCNFO0200 or its equivalent of L&T/Schneider/Siemens/C&S

Providing and fixing 250 A, 36 KA, FP MCCB rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Supplying and Laying of one following size PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Aluminum armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Havells/Polycab/RR Kabel/Finolex

2 x 6 Sq mm power cable aluminium conductor armoured cable

2 x 16 Sq mm power cable aluminium conductor armoured cable

3½ x 35 Sq mm power cable aluminium conductor armoured cable

Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Havells/Polycab/RR Kable/Finolex

2 x 6 Sq mm power cable aluminium conductor armoured cable

2 x 16 Sq mm power cable aluminium conductor armoured cable

Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Havells/Polycab/RR Kabel/Finolex

2 x 6 Sq mm power cable aluminium conductor armoured cable

2 x 16 Sq mm power cable aluminium conductor armoured cable

3½ x 35 Sq mm power cable aluminium conductor armoured cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 6 sq. mm (19 mm)

2 X 16 sq. mm (22 mm)

3½ X 35 sq. mm (32mm)

3½ X 95 sq. mm (45mm)

3½ X 120 sq. mm (45mm)

3½ X 240 sq. mm (62mm)

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 16 sq. mm

3½ X 95 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.

90 mm dia (OD-90 mm & ID-76 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

90 mm dia (OD-90 mm & ID-76 mm nominal)

Drilling the road without breaking the road surface(Asphalt) for laying of cable for feeding power supply by making up to following size of holes at both ends complete. Upto 120 mm bore dia

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Above 4.5 metre and upto 6.5 metre

Providing & drawing of 1.5 sqmm PVC Insulated and PVC Round Sheathed three Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade 1100 Volts as per IS: 694:2010 in the exsisting high mast/ light pole Make- Havells/Finolex/L&T/Polycab or equivalent make

Providing and fixing of Hinge of suitable size and shape for outdoor pannels doors and replacing the damaged by cutting Grinding and welding etc as required

Providing and fixing of covering plate of suitable size and shape and of similar colour for covering of open connection area in post top lights/street lights.

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

32 mm dia

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying & fixing PVC Loop wire box of minimum size (HxWxD) 200x140x95 mm in the existing street/security light pole including 10 Amp MCB C series, Connectors, Bakelite sheet and clamps with nut and bolts etc as req. Sintex/Hensal/hegar/Siemens/ABB

shivalaycorporation