Providing 11 KV HT UG cable from nandakam car parking to end pole at Forest Nursery at Tirumala

Supply and Transportation of 150 sq.mm 3 core 11 KV HT XLPE (E) insulated and armoured aluminium U.G. Cable as per IS specification confirming to IS:7098 / 11 / 85 H.T. cable for working voltage 11 K.V Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc complete. Make: Torrent / Universal / Unistar / Havells / KEI / Polycab / Gloster / RR Kabel / RPG / Finolex

Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Supply and Making heat shrinkable type outdoor terminations / joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc. as required of 3 core 120 / 150 / 185 Sq.mm sizes. Makes: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Manufacture, Supply and delivery of 300 mm dia NP-2 Class RCC Socket and spigot pipes conforming to B.I.S 458/2003 at Ex-factory (Rate per meter of effective length) excluding, Transportation Taxes & Duties.

Supply of 100 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked. Make: Jindal / Appollo / TATA.

Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting.

Supply Laying and Transportation of Outer dia 120mm and inner dia 103.5mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.

The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe. 2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease.

The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards)

Dismantling of the existing Street / Yard lighting poles / L.T.O.H / H.T.O.H poles with allied accessories (Stem pipe / MS Box / Cross arm / fitting / PVC wire / MS clamp etc.) with out causing any damage to the said materials making site clear by refilling the pit with excavated material and bringing it to the ground level (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Dismantling of the existing LTOH / HTOH lines of copper / Aluminium (2/3 /4 wire) with out causing any damage to the said materials (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost).

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply and Transportation of 150 sq.mm 3 core 11 KV HT XLPE (E) insulated and armoured aluminium U.G. Cable as per IS specification confirming to IS:7098 / 11 / 85 H.T. cable for working voltage 11 K.V Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc complete. Make: Torrent / Universal / Unistar / Havells / KEI / Polycab / Gloster / RR Kabel / RPG / Finolex

Laying of U.G cables size from 70 Sq.mm to 150 sq.mm and back filling of trench including labour charges etc., complete.

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete.

Supply and Making heat shrinkable type outdoor terminations / joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc. as required of 3 core 120 / 150 / 185 Sq.mm sizes. Makes: Raychem / M seal / Denson / Multy / Transeal- Hongshang

Manufacture, Supply and delivery of 300 mm dia NP-2 Class RCC Socket and spigot pipes conforming to B.I.S 458/2003 at Ex-factory (Rate per meter of effective length) excluding, Transportation Taxes & Duties.

Supply of 100 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked. Make: Jindal / Appollo / TATA.

Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting.

Supply Laying and Transportation of Outer dia 120mm and inner dia 103.5mm, 6Kg/Sq.Cm (PE- 100 grade) double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Make: DURA LINE (Dura Guard) or its equivalent make.

Providing earthing as per IS 3043/ 1987 with 100mm (ID), 13mm thick C.I. Pipe of 3.0 mtr. length after excavating an earth pit of size1.5 m X 0.9 M X 3.00M(Top 1.50 m X 1.20 m X 0.9m & bottom 1.20 M X 1.20 M X 1.65 M) and filling with a homogenous layer of 40 Kgs. of Coke / Char Coal, 20 Kgs. of Salt and the required quantity of sand around 100mm pipe from the bottom of the pipe to a height of 2.7mtr. and filling the remaining excavated portion with earth and consolidation / Settlement of the trench should be done by filling with sufficient quantity of water. A concrete bed of size 0.8 M X 0.8 M X 0.1 M thick and an inspection chamber having inside measurements of 0.4 M X0.4 M X 0.4 M with wall thickness of 100 mm with cement concrete CC (1:2.5:5) using 20 mm HBG Metal is to be constructed with side wall 100 mm above ground level and plastering the exposed walls neatly with CM (1:3) with 12 mm thick.

The Top of the Inspection Chamber is to be provided with reinforced precasted RCC Slab with 40mm thick with lifting hook. The top of C.I. Pipe is to be fixed & welded with suitable G.I. Wire mesh funnel 50mm x 6mm G.I. Strip having length of 300mm is to be fixed to the top of C.I. Pipe with G.I. Clamps fabricated with 50 x 3mm G.I. Flats with necessary bolts and nuts and necessary welding to be done to the clamps and C.I. Pipe. 2 Nos. of holes are to be drilled on either side of G.I. Flat for Extending earth connections. 65mm dia PVC Pipe is to be embedded at the pit entry for earth. After laying earth from earth conductor bus to Electrode trough PVC Pipe, the surface should be covered with bitumen and grease.

The cost of GI/Copper flat to be run from CI Pipe electrode to the equipment is to be made separately on running meter basis. The work shall be executed strictly as per IS 3043 - 1987. The rate includes cost and conveyance of all materials, labour charges, incidental charges etc., complete (Note:- Necessary meggaring testing is to be carried out in the presence of concerned Engineers and measurement of resistance shall be as per ISI standards)

Dismantling of the existing Street / Yard lighting poles / L.T.O.H / H.T.O.H poles with allied accessories (Stem pipe / MS Box / Cross arm / fitting / PVC wire / MS clamp etc.) with out causing any damage to the said materials making site clear by refilling the pit with excavated material and bringing it to the ground level (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost)

Dismantling of the existing LTOH / HTOH lines of copper / Aluminium (2/3 /4 wire) with out causing any damage to the said materials (Note: The dismantled above materials are to be returned to concerned section officer by the contractor at his cost).

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Nine lakhs seventy nine thousands three hundred eighty one and paise twenty eight only)