CA NO.CWE BLY/GE (W)/138 OF 2025- 2026SPECIAL REPAIRS TO BOUNDARY WALL OF P-112 SERPENTINE ROAD UNDER GE WEST BAREILLY

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc complete all as specified and as direceted.

M&L brick work with sub class b bricks strait or curved on plan exc 6 M mean radius (except brick) built in CM 1:6 complete all as specified and as directed..

M&L for brick work with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius complete all as specified and as directed.

Excavation in trenches not exceeding not exceeding 1.5 m in depth and not exceeding 1.5 m in wide, getting out in hard/ dense soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L for cement concrete type D2,1:4:8 (using 20 mm graded stone aggregate) as in mass concrete complete all as specified and directed.

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia complete all as specified and as direceted.

S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups,spacer, and binderscomplete all as specified and as direceted.

M & L for RCC M-25 (20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc.; basement slabs, under-reamed, piles and mass concrete including necessary formwork complete all as specified and as directed.

M & L for RCC M-25 (20 mm graded aggregate) Columns, pillars, piers, posts and struts including necessary formwork complete all as specified and as directed.

M & L for RCC M-25 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels, bends over 1.5m span all including necessary formwork complete all as specified and as direceted.

M&L 15mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:4) using WPC @ 200 ml per 50 kg of cement newly surface even and smooth without using extra cement complete all as specified and as direceted. .Note :- WPC shall not be paid separately for this item.

M&L for preparing of newly plastered walls surfaces and applying two coat exterior weather proof paint (Apex) over a coat of primer including wall care putty complete all as specified and directed.

S&F M S Posts and struts in fencing (any size of angle) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagnal faces of each pannel to be intertwined with Chain link fencing, and fixed to posts with MS nut bolts of exc 5 cm n exc 10 cm in lenth and 10-15 mm dia and washers ,wind ties for sign board posts and struts, MS round bars and similar work confirming to Fe 290 Gde E-165, one coat red oxide before fixing complete all as spd and directed.

M& L for Preparation of new or periousely iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as direceted. (each line wire to be measured).

S&F in repairs Concertina coil fencing with required dia of 600 mm, upto 2.1 mtr high wall with existing Y Shape angle iron placed 2. Mtrs to 3.2 Mtr apart and with 5+5 No (Y Shape) barbed wire with and including necessary fixing GI Stapple and GI Cps for securing coil to retained horizontal complete all as specified and directed with following specification: (i) Dia of coil (Unstreached)-600 mm (ii) Number of circles - 50 turn per coil. (iii) Weight of each coil with hessian pack-10.00 to 10.50 Kgs. (iv) Coverage per coil- 6 Rm (v) Central core wire :- made from 2.5mm + dia high tensile wire,galvanised as per IS :- 2629.Zinc coating 200 to 230 vsm. (v)Thickness of the tape punched Tape- 0.5 mm+ Note :- Barbed wire measured and paid separetly.

S&F in PVC (SWR) 100 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor for weep holes with necessary fitting complete all as specified and as directed.

M&L for framed work as in ornamental doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete confirming to Fe-290 Gde- E165 complete all as specified and directed.

Taking down of Iron Gate complete all as specified and as direceted.

Please Enable Macros to View BoQ information