ADDN/ALTN TO BOUNDARY WALL NEAR P-33 AT SOLMARA AND OTHER SR/MINOR WORKS AT NAA UNDER GE (N) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

Excavating in trenches in soft/loose soil, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out complete in all respect as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft loose soil complete in all respect as specified and directed.

Dismantalling of Brick work, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, and pre-cast concrete articles complete in all respect as specified and directed.

Demolition of reinforced cement concrete including all quoins, arches, pillars, beams etc., complete in all respect as specified and directed.

Demolition of cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level ) unreinforced complete in all respect as specified and directed.

Dismantling of sheets (corrugated, semicorrugated, plain etc. of any type) in roof coverings, walls, ridges etc. or of similar types complete in all respect as specified and directed.

Dismantling of boarding of any description and material , fixed in any position with nails or any means complete in all respect as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete in all respect all as specified and directed.

Dismantling and breaking up drain pipes AC /CI /PVC Pipes set in cement mortar of 100mm/75mm bore complete in all respect as specified and directed.

Taking up or down steel tubing and connection to wall and ceiling or laying in floors of 15mm dia bore pipe including necessary cutting/chasing etc. complete in all respect as specified and directed.

Taking up or down steel tubing and connection to wall and ceiling or laying in floors of 20mm dia bore pipe including necessary cutting/chasing etc. complete in all respect as specified and directed.

Dismantling of timber scantling of 40 Sqcm and over in section, in any position and location complete in all respect as specified and directed.

Taking down chowkats and shutters (without taking off shutters from the frame) exc 1.5 and n exc 4.00 sqm each complete in all respect as specified and directed.

Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete in all respect as specified and directed.

Taking down cement mortar plaster on brick or stone wall etc, including raking out joints, hacking for key, scrubbing down with water etc, complete in all respect as specified and directed.

Demolition of lathing sigle or double including battens and plaster or chicken wire lathing complete in all respect as specified and directed.

Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete in all respect as specified and directed.

Providing and laying cement concrete in foundations, filling and mass concrete using type D-2, 1:4:8 (using 40mm nominal size crushed and graded stone aggregate) complete in all respect as specifified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in rough finished flat surface of concrete complete in all respect as specifified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete in all respect as specifified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions of square/rectangular in shape and in rough finished surface complete in all respect as specifified and directed.

M & L for formwork to soffit, sides of pillars, posts, struts, piers, arched lintels/bands or of similar type of square/rectangular in shape and in rough finished surface complete in all respect as specifified and directed.

M & L for deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required as flat, circular etc., including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed.

M & L for deformed TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete in all respect as specifified and directed.

M & L for 15mm thick plastering on brick/stone/concrete surafces of wall in cement mortar (1:4) of plane/flat or in arched shape or design finished even and fair cement complete in all respect as specifified and directed.

M & L for 10mm thick plastering on brick/stone/concrete surafces in ceiling in cement mortar (1:4) of plane/flat or in arched shape or design finished even and fair cement complete in all respect as specifified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete in all respect as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed.

Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in plinth beam, lintel beam etc. complete in all respect as specifified and directed.

M & L brick work with sub-class "B" old size bricks of class designation 75, straight or curved or in arched on plan exc. 6m mean radius built in CM (1:6) complete in all respect as specified and directed.

M & L brick work with sub-class "B" old size bricks (except bricks; old dismatalled brick after cleaning, washing as retrived against here-in-before) of class designation 75, straight or curved or in arched on plan exc. 6m mean radius built in CM (1:6) complete in all respect as specified and directed.

Providing and laying reinforced or un-reinforced cement concrete coping, hold fasts etc. in cement concrete 1:2:4 type B-1 (using 20mm nominal size crushed and graded stone aggregate) or of similar type of work in flat, angular or in arched/triangular shaped including necessary form work complete in all respect as specified and directed.

S & F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staple or steel pins etc. complete in all respect as specified and directed.

Material and labour for preparation of decorated/undecorated surface of walls and applying two coats of weather coat over two coats of home shield paint of make Berger or equivalent as per manufacture's instructions and two coats of 2mm thick wall care putty including rubbing, cleaning, filling etc. complete in all respect as specified and directed.

S & F Joist, channel, angle, or tee sections, fixed independently as per shape incuding necessary cutting/holes for barbed wire fixing, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicateds and similar work con- forming to Fe. 290. Gde-E-165 complete in all respect as specified and directed.

M & L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete in all respect as specified and directed.

Material & labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, as in arches of rough finished etc, complete in all respect as specified and directed.

M & L for 12mm thick cement mortar as in band/patta using cement mortar mix 1:3 of required width/girth including necessary scaffolding and form work for in flat, arched or angular shape and finished the surface even and smooth without using extra cement complete in all respect as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50 mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with bitumen washer to truss members of any material, complete in all respect as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws with bitumen washer to truss members of any material, complete in all respect as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in eves sheet/ board covering or of similar type, fixed with self tapping screws with bitumen washer including necessry mild steel flats, angles etc. and screws for fixing with turss members of any material or framed structure complete in all respect as specified and directed. (Note:- MS work shall be measured and paid separately).

S&F mild steel sections (Beam, tee, angle, channel, tubular/ hollow section or flat sections) in roof tursses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, independent fixing with welding etc. including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality "A") complete in all respect as specified and directed.

M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed.

M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skrting/ dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 10 mm thick rendering in cement mortar (cm) 1:4, complete in all respect as specified and directed.

S&F three layered white in colour rotational moulded made out from LLDPE/HDPE material water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including two tank nipples of 20 mm nominal bore dia of connected pipe material hoisted and fixed in position, all as pspecified in SSR part I, complete in all respect as specified and directed.

S&F 15 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary cutting, chsing etc. complete in all respect as specified and directed.

S&F 20 mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary cutting, chsing etc. complete in all respect as specified and directed.

S & F in repair 15mm dia bore CP finished, long body bib taps cast coper alloy with crutch or butter fly handle screwed down secured for iron pipe complete complete in all respect as specified and directed.

S & F 15mm dia bore CP finished, long body bib taps cast coper alloy with crutch or butter fly handle screwed down secured for iron pipe complete complete in all respect as specified and directed.

S & F of PVC (SWR) floor trap, 75mm dia outlet dia with grating including jointing with solvent cement complete all as specified and directed.

S&F 20 mm dia tubular towel rail 600 mm long of cast copper alloy, chromium plated with end brackets complete all as specified and directed.

S&F 20 mm bore of Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete in all respect as specified and directed.

S&F 110 mm bore of PVC (SWR) bends of any radius, complete in all respect as specified and directed.

S&F 75 mm bore of PVC (SWR) bends of any radius, complete in all respect as specified and directed.

S&F 110 mm bore of PVC (SWR) junction single, (Single T) equal or unequal with access door complete in all respect as specified and directed.

S&F 110 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete in all respect as specified and directed.

S&F 75 mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, complete in all respect as specified and directed.

S & F 15mm dia PVC connection pipe with PTMT nuts of length 450mm complete in all respect as specified and directed.

S&F 2nd class hard wood scantling clean swan to frame or in any other description complete in all respect as specified and directed.

S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel haivng a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the M.S. frame weloded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete in all respcet as specified and directed.

S&F 75 mm size of medium weight butt hinges stainless steel complete in all respect as specified and directed.

S&F Aluminium handles, cast type, anodised 125 mm size, complete in all respect as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length, complete in all respect as specified and directed.

S & F MS hold fasts/wind ties using Fe-410W (Grade E-250 quality "A") complete in all respect as specified and directed.

S&F 35mm Flush shutters, solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 100 mm size, complete in all respect as specified and directed.

S&F aluminium anodised sliding door bolts with hasp and staple (boil type) 12mm dia bolt250 mm long complete in all respect as specified and directed.

S&F 100 mm size of butt hinges stainless steel complete in all respect as specified and directed.

S&F wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed.

S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed.

S&F Stop valves/ Angle valves of 15 mm bore male/ female threaded, fancy type CP finish, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete in all respect as specified and directed.

M & L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains complete in all respect as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete in all respect as specified and directed.

M&L for stone ballast hardcore of gauge n.exc.63 mm,deposited,spread, and levelled in layers n.exc.15 cm thick,watered and rammed to a true surface complete in all respect as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection/footpath finished the surface even and smooth without using extra cement including necessary expansion joints and filling material in it complete in all respect as specified and directed.

Supply only integral WPC complete in all respect as specified and directed.

M&L for rendering 15 mm thick on faces other than fair faces of brick work or concrete surfaces in cement mortar 1:6, internal surface and finished even and smooth without using extra cement, complete in all respect as spefied and directed.

S&F 15 mm dia bore cast copper alloy, chromium plated shower roses with swivel joints including fixing to steel/ CPVC pipe/ fittings or of union complete all as specifeid and directed.

S & F of shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete in all respect as specified and directed.

S & F of Vitreous China urinal of size 355X345X535mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including urinal spreader, flush pipe, CP waste grating and Union for discharge pipe complete in all respect as specified and directed.

Supply and fixing factory made mild steel ventilator with top hung shutters including hinges and steel peg stay complete as per std drg complete all as specified and directed.

S & F Sheet glass 3 mm thick, figured glass ,pin head type and glazing with oil putty in square n exc 0.5 sq.m in each pane complete in all respect as specified and directed.

Material and Labour for applying two coats of cement base paint over one coat of primer on wall including filling the sutface with wall care putty complete in all respect as specified and directed.

M&L for preparing old plastered surfaces and applying Two coats of cement base paint including filling the sutface with wall care putty complete in all respect as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete in all respect as specified and directed.

Preparation of old untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint (Ordinary tint) complete in all respect as specified and directed.

M&L for preparing old plastered surfaces of walls and applying two coats of white wash including filling the sutface with wall care putty complete in all respect as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash including filling the sutface with wall care putty complete in all respect as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity low level, white, including inlet ball valve, float valve and handle including brackets & flush pipe of polyethylene of high density complete in all respect as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, 10 litre capacity low level, white, including inlet ball valve, float valve and handle including brackets & flush pipe of polyethylene of high density complete in all respect as specified and directed.

M & L for Rendering 15 mm thick in CM 1:4 on one side of lathing or stone masonery surface other than fair face of brick work etc complete in all respect as specified and directed.

M & L for Rendering 15 mm thick in CM 1:6 on other side of lathing or stone masonery surface other than fair face of brick work etc complete in all respect as specified and directed.

M&L GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joist etc including all laps ,cutting and waste complete in all respect as specified and directed.

M & L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete in all respect as specified and directed.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a) complete in all respect as specified and directed.

S & F 30mm thick glazed and skeleton(30mm thick in 2nd class hardwood without sash bars for window,ventilators complete in all respect as specified and directed.

S & F 30mm thick glazed and skeleton(30mm thick in 2nd class hardwood with sash bars for window,ventilators complete in all respect as specified and directed.

S&F Aluminium handles, cast type, anodised 100 mm size, complete in all respect as specified and directed.

S&F Aluminium, anodised, bareel tower bolts of extruded section and fixed, 100 mm length, complete in all respect as specified and directed.

Supply and Fix exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping , of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 4mm dia GI wire as suspender and including 4mm thick decorative pre -painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantalling of existing false ceiling complete all as specified and directed. (Make: Eternit, Everest or equivalent)

S & F of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 32mm dia bore CP finish cast copper alloy waste fittinh complete in all respect as specified and directed.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including one coat of primer and filling the surface with wall care putty complete in all respect as specified and directed.

M&L Comlpete removal of existing treatment on wall and applying two coats of distemper oil emulsion on wall surfaces including one coat of primer and filling the surface with wall care putty complete in all respect as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete in all respect as specified and directed.

Preparation of old steel surfaces of any description, exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete in all respect as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

S/F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete in all respect as specified and directed.

S&F GI wire cloth 0.43 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete in all respect as specified and directed.

S & F curtain rails 20mm dia curtain rods of mild steel pipe coated with PVC coating with fixing bracket stops rollers etc complete in all respect as specified and directed.

Providing and laying 40mm thick DPC using type B-O, 1:2:4 (using 12.5mm nominal size crushed and graded stone aggregate) including necessary form work complete in all respect as specifified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Cresoete oil complete in all respect as specifified and directed.

M&L for 75mm thick cement concrete flooring type D-2, 1:4:8 (using 40mm nominal size crushed and graded stone aggregate) finished fair and even complete in all respect as specified and directed.

S& F white vitreous china squatting pan of size 580x440 mm,"ORISSA PATTERN" with PVC 'P' or 'S' trap bedded in cement concrete (Exclusive flushing cistern and flush pipe) with integral foot rests complete all as specified and directed.

S & F 6mm thick plywood, grade BWR , type BB fixed with screws to timber framed work complete in all respect as specified and directed.

S & F PVC (SWR) 110mm internal bore cowl complete in all respect as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregates) for concrete bed to drain pipes including packing under and haunching against side of pipes 100 mm bore after they are laid down, jointed and tested complete in all respect as specified and directed.

S & F vitreous china wash down water closet pan (pedestral pattern) white including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete in all respect as specified and directed.

M & L for mild steel work such as in guard bars, grills, grating etc. with ends of bar shouldered and/or rivetted or forged into spikes and of similar type of work conforming tp Fe 290, Gde E-165 complete in all respect as specified and directed.

S & F 2mm thick fiber glass reinforced translucent sheet with two corrugation side lap fixed with coach screw and washer in roof, wall etc. or fixed with L type or J type or cranked hook bolts as directed complete in all respect as speified and directed

S & F 20 mm bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 20 mm-210 gms)

E/M PORTION

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

Taking down main switches and DBs of any type and make including wooden board / junction box complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH unsheathed multi stranded copper conductor cable 1100 Volts grade single core conforming to IS-694-1990 and one run of continous earth wire with 1.50 Sqmm stranded core PVC insulated unsheathed copper conductor cable draw in & including PVC surface casing ‘N’ capping not less than 20mm wide double lock type to be fixed with the help of rawal plugs & screws including necessary fittings & fixtures and including PVC terminal box and PVC board making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified and directed. for the following:-

(a) One light/fan/exhaust fan point controlled by one, one way switch, with cable 1.5 sqmm complete all as specified and directed.

(b) All as per item No. 1 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and directed.

(c) All as per item No. 1 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 4.0 sq mm copper cable complete all as specified and directed.

(d) All as per item No. 1 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

Material and labour for point wiring with 2.5Sqmm PVC insulated FRLSH unsheathed multi stranded copper conductor cable 1100 Volts grade single core conforming to IS-694-1990 and one run of continous earth wire with 1.50 Sqmm stranded core PVC insulated unsheathed copper conductor cable draw in & including PVC surface casing ‘N’ capping not less than 20mm wide double lock type to be fixed with the help of rawal plugs & screws including necessary fittings & fixtures and including PVC terminal box and PVC board making good disturbed surface with CM (1:4) to match with the existing surface for 3 pin 15 Amps switch socket combination on independent board complete all as specified and directed.

S&F in repairs 300mm sweep, with metal blade and louver complete fixed in wall with fastener and including making hole in wall of suitable size and plastering finishing of surfaces complete all as specified and directed.

M&L for sheet metal enclosure for DBs SPN 4 way with rated bus bar, 240 V, Double door, complete flush mounted complete all as specified and directed.

M&L for MCB single pole 240 volts 5 to 32 Amps C Curve complete all as specified and directed.

M&L for MCB single pole & neutral 240 volts 32 Amps complete all as specified and directed.

S&F LED luminaires, 20 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, wit high transmissivity diffuser, high lumen output, with suitable electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from conector and ceiling rose complete all as specified and directed.

S&F LED wall security lights 15W with necessary brackets (made out of 25mm bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part I connected to earth test point all as specified or indicated including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 40mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 20mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion , complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc, or for shafts, wells, cesspits, man holes, pier holes etc not exc 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick all as complete all as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable in trenches for protection of cables complete all as specified and directed.

Material & Labour for sub class 'B' bricks laid flat in trenches for the protection of under ground cable complete all as specified and in SSR Part-I

Supply & fixing GI Pipe light grade 40 mm dia, ISI marked, of required length for protection of cables complete including necessary MS clamps, nuts, bolts and washers etc fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core for laying in trenches and poles /walls complete all as specified and directed.

S&F GI Pipe Medium grade 25 mm dia, ISI marked, complete with all fittings fixed complete to walls, ceilings, floors laid in trenches complete all as specified and directed.

S&F Gun metal Gate Valve with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm , ISI Marked , complete with all fitting accessories complete as specified and directed

Cutting and insertion of Tee/ ferrule for taking branch connection complete all as specified and directed.

M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

M&L for switch socket out let 2 in one, 5 Amps, 240 Volts flush type,complete all as specified and directed.

S&F socket out let only, 5 pin 5 Amps flush type controlled by another 5 Amps switch complete all as specified and directed.

M&L for switch socket combination 2 in One , 6 pin 5 Amps & 15 Amps flush type universa complete all as specified and directed.

Supply and fix in replacement of lamp holder, PVC/Polycarbonate type for bracket fittings complete all as specified and directed.

S&F ceiling rose surface backelite Polycarbonate type two to three terminals complete all as specified and directed.

M&L for sheet metal enclosure for DBs SPN 8 way with rated bus bar, 240 V, Double door, complete flush mounted complete all as specified and directed.

M&L for MCB single pole 240 volts 5 to 32 Amps B Curve complete all as specified and directed.

M&L for MCB single pole & neutral 240 volts 32 Amps complete all as specified and directed.

Supply and fix LED BALL LAMP of 10W with Lumen output 1100 and Colour Temp 6500Ksuitable to fix in batten holder, complete all as specfied and directed.

Anil Kumar Sarmah

M/S S.K. Sharma

M/S M N ENTERPRISE

D G Corporation

M/S SHYAMAL SARMAH

M/S Deep-Jeet

M/S Inder SINGH SABARWALL