Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.2 L
EMD Value
₹7,000
Closing Date
5 Dec 2026, 4:05 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (R & B) Division, Bharuch
Providing and supplying Furniture for Town Planning & Valuation Deptt., Bharuch branch Dist. Bharuch.
367992
21 Of 2026-27
Open
Furniture/ Fixture
Works
Bharuch
1 document required · 1 mandatory
₹900
Executive Engineer, Bharuch (R&B) Division, Bharuch
₹7,000
21 Nov 2026
21 Nov 2026
21 Nov 2026
5 Dec 2026
21 Nov 2026
90 days
No. Figure Amount
1 Providing and supplying medium back chair with a durable metal frame 4.00 No 6388.25
work, upholstered with changeable fabric upholstery covers (as per
requirement) and molded PU foam. The chair shall include molded seat and
back covers, with the back foam contoured to provide lumbar support for
added comfort. It shall have high durability casters and a hydraulic system
with a gas lift cylinder having a minimum 5 year warranty. Chair dimensions
shall be approximately 47.5 cm (W) x 58 cm (H) for the back, and 49 cm (W)
x 48 cm (D) for the seat. The PU foam shall be molded with a density of 45 ±
2 kg/m³. The chair shall include one-piece armrests that are scratch and
weather resistant. It shall be equipped with a permanent contact mechanism
offering 360° rotation, pneumatic height adjustment, 17° maximum tilt and tilt
tension adjustment. It shall be confirmed and approved in advance by the
Architect, along with a description and image, or as directed by the Engineer-
in-charge.
2 Providing and supplying Low back chair for work center & other staff the seat 2.00 No. 4646.00
& back are made of M.S frame work. Upholstered with changeable fabric
upholstery covers (as per requirement) and molded PU foam, together with
molded seat & back covers. The back foam should be designed with
contoured lumber support for extra comfort. Caster of high durability &
hydraulic. The chair should have cylinder with 5 years warranty. The size of
chair 45cm x 45cm (Back side) and 45cm x 43cm (seat size). The PU foam
should be molded with density = 45 ± 2 kg/m3 with one piece armrests. The
armrests are scratch and weather resistant. The permanent contact
mechanisms is designed with 360° revolving type, with pneumatic height
adjustment & 17° maximum tilt only & tilt tension adjustment facility. Complete
as per sample approved and as directed by the Architect and approved by
the Engineer in charge.
3 Providing and supplying visitor or guest chair with seat and back made of 12 10.00 No. 3600.65
mm thick hot-pressed plywood, upholstered with changeable fabric
upholstery covers (as per requirement) and molded PU foam, along with
molded seat and back covers. The back foam shall be contoured to provide
lumbar support for enhanced comfort. The chair dimensions shall be
approximately 45 cm (W) x 38 cm (H) for the back, and 45 cm (W) x 43 cm
(D) for the seat. The PU foam shall be molded with a density of 45 ± 2 kg/m³.
The armrests and legs shall be fabricated from powder coated mild steel
securely fixed to the MS structure using all necessary hardware. It shall be
confirmed and approved in advance by the Architect, along with a description
and image, or as directed by the Engineer-in-charge.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
4 Providing and supplying Main Table with side unit as per architect’s drawing, 2.00 No. 51805.93
comprising a main table of overall size 1800mm (L) x 850mm (W) x 750mm
(H) and a side unit of size 1200mm (L) x 400mm (W) x 850mm (H). The table
structure shall be fabricated from 19mm thk. plywood (M1), externally finished
with 1.0mm thk. decorative laminate (M24) and internally with 0.8mm thk.
liner laminate. The main table includes a 450mm wide keyboard tray,
drawers (each 450mm wide) with telescopic roller channels (M15), 1 shutter
with necessary hinges (M18), handles (M19), magnets and locks (M16), and
50mm dia. stainless steel leg supports. A 150mm wide and 12mm thick
Corian patta is provided at the tabletop edge and a 12mm thick clear glass
top is laid over the entire table. 12mm wide grooves shall be provided at
equal distances along the front and side elevations for enhanced aesthetics.
The side unit includes 2 drawers (each 225mm high) and 4 shutters,
fabricated as per elevation, complete with all necessary hardware (M14). A
plastic grommet cable outlet (60mm dia.) is provided on the tabletop for wire
management. All exposed edges shall be finished with teakwood beading
patti (M4) and approved melamine polish (M29). A footrest is included under
the main table. Complete in all respects as per detailed architect’s drawings
and instructions of the architect and engineer in charge.
Main Table Size: 1800mm (L) x 850mm (W) x 750mm (H)
Side Unit Size: 1200mm (L) x 400mm (W) x 850mm (H)
5 Removing dry or oil bound distemper by a washing and scraping and sand 117.00 Sq.m. 19.13
papering the wall surface smooth including necessary repairs to scratches
6 Providing and supplying office Cabin Table with Back Side unit as per 8.00 No. 25897.41
architect’s drawing, comprising an L-shaped main table of overall size
(H) and a back side unit of size 900mm (L) x 400mm (W) x 750mm (H). The
structure shall be fabricated from 19mm thick plywood (M1), externally
finished with 1.0mm thick decorative laminate (M24) and internally with
0.8mm thick liner laminate, with all exposed edges finished using teakwood
beading (M4) and coated with melamine polish (M29). The main table
includes one 450mm wide keyboard tray, one drawer (450mm wide) with
telescopic roller channels (M15) and one shutter with hinges (M18), handle
(M19), magnet, and locking arrangement (M16). A 12mm thick clear glass top
is laid over the table surface, and a 60mm dia. plastic grommet is provided
for wire management. A 450mm high partition wall is provided on top of the
table as per drawing. The back side unit comprises two drawers (each
200mm high) and two shutters as per elevation, complete with all necessary
hardware (M14). A footrest is provided
under the main table. The entire unit shall be executed as per detailed
drawings and the instructions of the architect and engineer-in-charge.
7 Applying two coats of putty & two coats of primer of approved brand and 117.00 Sq.m. 40.59
manufacture on new wall surface to give an even shade including thoroughly
brushing the surface free from mortar dropping and other foreign matter and
sand papered smooth.
8 Distempering (Two coats) with oil bound distemper of approved brand and 222.00 Sq.m. 79.86
manufacture and of required shade on wall surfaces to give an even shade,
over and including a priming coat with distemper primer of approved brand
and manufacture after thoroughly brushing the surface free from mortar
dropping and other foreign matter and also including preparing the surface
even and sand papered smooth. Extra over Item 44, 45 for distempering with
oil bound washable distemper on ceiling and sloping roofs.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
9 Wall painting (two coats) with plastic emulsion paint of approved brand and 117.00 Sq.m. 78.90
manufacture on undercoated wall surfaces to give an even shade including
throughly brushing the surface free form mortar droppings and other foreign
matter and sand papered smooth.
10 Providing, fabricating, supplying and fixing heavy duty M.S. Storage Rack 10.00 No. 5555.00
(Non-Bolted Type) of rigid fully welded construction, manufactured from
approved quality mild steel ISA angles 40 x 40 x 5 mm for vertical uprights
and M.S. flats / channels for horizontal framing, comprising 4 shelves / tier
system, each shelf fabricated from minimum 1.2 mm thick M.S. sheet and
reinforced with 25 x 25 x 3 mm M.S. angle stiffeners to prevent sagging,
overall rack dimensions 1800 mm height x 900 mm width x 450 mm depth,
designed to safely carry minimum 100 kg uniformly distributed load per shelf,
complete with 100 x 100 x 6 mm M.S. base plates welded to uprights for
proper stability and floor anchorage, including all necessary cutting, welding,
grinding and finishing, thorough surface preparation, application of one coat
of red oxide zinc chromate primer followed by two coats of approved shade
synthetic enamel paint, inclusive of material, labour, handling, transportation,
erection, alignment and fixing at site, complete in all respects as per
drawings, technical specifications and directions of the Engineer-in-charge.
11 Providing and fixing 35 mm thick shutters for Doors, windows and clear story 2.52 Sq.m. 3941.37
windows including anodized alluminium butt hinges with necessary screws.
(A) Indian Teak Wood (1) Fully Panelled.
12 Providing and fixing window having extruded aluminum colour anodized 18.00 Sq.m. 2140.33
section frame main outer size 127mm x 38.10mm x 1.35mm @wt.
kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@
wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm
@1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm
x 1.29mm@ 0.456 kg/mt, vertical member of size 40mm x 18mm x 1.29mm
@ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass
with powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc. complete for window.
13 Providing, fixing and arranging material welded construction excluding 7.00 No. 14809.63
leveller construction 0.7 mm thick (+/- 0.07mm) CRCA sheet for shelf, 0.8mm
thick (+/- 0.09 mm) High yield strength CRCA sheet for doors and back,
0.9mm thick (+/-0.08mm) CRCA sheet for all other components, CRCA sheet
'D' grade high yield strength as per IS : 513. Locking and Handle Mazak
handle and three way locking mechanism with shooting bolt. Shelving height
wise adjustable shelf mounting, Uniformly Distributed load capacity per each
shelf is 40Kg maximum, 4 Nos. of adjustable full shelf and box file A4 size
(85w x 345H x 285D) can be stored vertically on three shelves and clear
space above fourth shelf is 240mm. Finished with epoxy powder coated to
the thickness of 50 microns (+/-10) including all necessary fixtures, fasteners
machinery etc. complete as per photographs / drawing and directed by
Engineer in charge.
Total Rs.
i.e. Rs. Six lacs Twenty Three thousand Two hundred Sixty Five and Seventy paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________
In words ____________________ In words _______________
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been
deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me
and found order.
Deputy Executive Engineer Sr. Divisional Account Officer
City (R & B) Sub Division, Bharuch (R & B) Division,
Bharuch Bharuch
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GRs - Circulars - 1.pdf
GRs - Circulars - 2.pdf
INDEX-GRs.pdf
E Tender Notice.pdf
SBD Book.pdf
BOQ.pdf
Specification Index.pdf
Technical Specifications.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .