Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.9 LAccepted-AOC PALAJIKA VALLUHER VEEDU KOSHTAN ALAKKAD NANNAMUKKU 679591 | MALAPPURAM | MALAPPURAM | KERALA | 679591 | 1 | Accepted-AOC Only one bidder quoted, offering a rate of 9.26 above the estimated rate. Negotiations were initiated with the bidder, and the negotiated rate was approved by the competent higher authority. |
| Sl No | Description | Qty | Unit | Rafeeq P V L1 |
|---|---|---|---|---|
| 1.00SITC of 15 KVA DG set and panel board | ||||
| 1.00 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | 18 | sqm | 2,950 ₹53,100 Lowest |
| 1.00 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | 0.5 | sqm | 3,838.98 ₹1,919.49 Lowest |
| 1.00 | 90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet | 30 | metre | 8.53 ₹255.9 Lowest |
| 1.00 | 90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | 5 | metre | 1,156.84 ₹5,784.2 Lowest |
| 1.00 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | 150 | kg | 191.31 ₹28,696.5 Lowest |
| 1.01 | OD264047/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.- | 300 | kg | 163.16 ₹48,948 Lowest |
| 1.01 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. | 2,500 | Cum cm | 7.23 ₹18,075 Lowest |
| 1.01 | 90.14.7:Supply and providing copper earth bus in the panel board | 1,000 | Cum cm | 6.86 ₹6,860 Lowest |
| 1.01 | OD338294/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1 | 1 | each | 4,927.04 ₹4,927.04 Lowest |
Tender Value
₹10.0 L
EMD Value
₹24,878
Closing Date
28 May 2026, 5:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer,SP DWS Subdivision No.1,Siruvani sagar,Palakkayam
GENERAL- 29th JCB action plan - SITC of 15 KVA DG set and electrification for Siruvani Dam - Installation of DG set and electrification for River Sluice - Emergency shutter at Siruvani Dam -General Electrical Work
2026_Irrig_842434_2
IRR/PI/18594/2025-2026
Open Tender
Electrical Works
Item Rate
120 days
Palakkayam
Please refer tender documents
12 documents required · 12 mandatory
₹2,195
Yes
₹24,878
Yes
22 Jul 2026
20 May 2026
30 May 2026
20 May 2026
28 May 2026
20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SITC of 15 KVA DG set and panel board | |||||
| 1.001 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | - | sqm | - | - |
| 1.002 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | - | sqm | - | - |
| 1.003 | 90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet | - | metre | - | - |
| 1.004 | 90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | - | metre | - | - |
| 1.005 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | - | kg | - | - |
| 1.006 | OD264047/2024-2025:Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles,flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colourwashing etc as required.- | - | kg | - | - |
| 1.007 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. | - | Cum cm | - | - |
| 1.008 | 90.14.7:Supply and providing copper earth bus in the panel board | - | Cum cm | - | - |
| 1.009 | OD338294/2025-2026:Supply and fitting Digital Multifunction meter to read V, A, F, 3 phase accuracy class 1 | - | each | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewsbd.pdf
Tender Documents • 1.64 MB
nit.pdf
Tender Documents • 0.03 MB
BOQ_1439620.xls
BOQ • 0.36 MB
Makeofmaterials.pdf
Additional Documents • 0.02 MB
SPECIALCONDITIONS.pdf
Additional Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .