PIP Mechanical Works-Patch work and painting of Kollakadavu flush escape shutter

Amount

Cleaning of work site, dismantling the old structures, demolishing the existing civil structure and providing concrete for fixing new embedded parts etc.

OD5804/2022-2023:Clearing grass from banks of canal and removal of silt, zoological waste and other debris from canal bed including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

OD5805/2022-2023:Taking out of shutter from the grooves after dissembling from the old hoisting mechanism and placing safely on nearby suitable place not more than 50m from the site, then hooking it back into grooves after completing works on shutter and embedded parts as per direction of deptl officer at site including cost of all labour, conveyance charges, all lead and lift etc.

OD5882/2022-2023:Dismantling of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Unit / Embedded parts etc. of the same and stacking at a distance of 100 meter including hire of machinery, labour etc. complete as directed by the departmental officer at the site.(Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80 % )

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

85.101:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107:Supply of MS round bar including cost of conveyance charges

OD5883/2022-2023:Fabrication and erection of Embedded parts and accessories for canal shutter as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Supply, Patch work, Painting of shutter & fixing of rubber seal, thrust rollers etc.

85.101:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD5884/2022-2023:Supply of MS Bolts and nuts.

OD5888/2022-2023:Patch work of Structural steel canal gate and accessories as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD5905/2022-2023:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance charges complete as per approved specification or drawing.

OD5906/2022-2023:Supplying and fixing in correct position with specified initial interface L-type/Bulb nose rubber seal confirming to IS11855 to the canal shutters including cost of MS bolts & Nuts, all labour, machinery, incidental and conveyance charges complete as per approved specification or drawing.

OD5907/2022-2023:Supplying and fixing specified cast steel thrust roller assembly having 120mm OD, 46mm ID, 50mm tread width, SS shaft 40mm OD, 160mm L as per sample including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete.

OD5908/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) and accessories safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc. complete as per direction of departmental officer at site.

Supply and Fabrication of hoisting unit, providing new hoisting mechanism & screw rod, Erection and trial run etc. complete

85.101:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD5912/2022-2023:Fabrication of Structural steel Hoisting platform and accessories etc. as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD5913/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

OD5914/2022-2023:Providing EN-8 screw rod 7.50 tonne capacity 4.00 M lift screw hoist having one number of EN -8 scerw shaft,worm gear units having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

OD7934/2022-2023:Supply and fixing of Chain & Sprocket 180pcd/120pcd 3/4" and Plummer block for Manual operation of worm & pinion mechanism including cost of materials and labour etc. complete.

OD5915/2022-2023:Erection of the Hoisting Platform and accessories including hand rails , ladder etc. for the same including alignment correction, setting, fixing etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc. complete as per direction of departmental officer at site.

OD5916/2022-2023:Trial run of the new shutter with its hoisting mechanism and applying grease on screw rod including cost of labour, all lead and lift etc complete as per the direction of deptl officer at site.

Kuttanpillai

Bidder Name

Kuttanpillai

R K BABU