PROVN OF CHAIN LINK FENCING OF 5 GRENADIERS UNDER AGE B/R-I OF GE DEHRADUN

Amount

Excavating in post holes each not exceeding 0.5 Cum in soft/loose soil , getting out, and removing surplus soil to a distance not exceeding 50 metre and making good surface complete all as specified and directed. Note :- PCC for filling shall be measured and paid for separately under respective item of this schedule.

Provide Cement concrete 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F Mild steel work as post and strut in fencing including cutting tops/bottom to shape, drilling holes, notching for wire etc Flat iron strip for securing chain link fencing with angle iron post etc including all necessary drilling, bolting or riveting etc. conforming to Fe-290 complete all as specified and directed by Engineer-in-Charge.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long, diameter of neck exceeding 8 mm and not exceeding 12 mm complete all as specified and directed..

S & F Mild steel framed work such as grills, gratings, with ends of bars shouldered or riveted, guard bars, steel gate work and simillar work including welding, or forged into spike, etc and simillar works conforming to Fe-290 Gde E-165 for portion framed and hung as gates, including pintle hinges sliding bolts complete all as specified and directed. .

Supply only Mild steel round bars 10 mm dia or over for securing chain link fencing conforming to Fe-410 W Gde E-250 Quality A complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

Supply only 3mm dia or more GI wire chain link fencing including line wires, 50mm mesh, rails, straining bolts, etc. including provision of binding wire etc complete.

Preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of the new or previously untreated steel surface of any description not exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer (for 10mm dia line wires) complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured)

Supply and fixing concertina coil 800 mm dia (in stretched position) hot dip galvanised steel wire coated with CRL anti corrosive paint, making diamond shape with the help of dove tail clip (18 SWF) fixed over razor wire with angle iron. The concertina coil is to be fixed with razor wire at points wherever coil touches the bottom of razor wire with the help of hog rings (14 SWG) complete all as specified.

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base, foundation filling, mass concrete, etc complete all as specified and as directed.

M & L Brick work with sub-class 'B' bricks (old size) straight or curved on plan exceeding 6 metre mean radius, built in cement and sand mortar (1:4) complete all as specified and directed.

M & L 15mm thick rendering in cement and sand mortar (1:4) on fair faces of brick work surfaces finished even and fair without using extra cement complete all as specified and directed.

Preparing newly plastered or unplastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point and complete all as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Taking down old barbed wire/razor wire fixed on angle iron swan neck posts in any description

Dismantling mild steel work of any description not otherwise provided for

VERDHMAN ASSOCIATES

V R Associates

M.K Engineers

PAWAN KUMAR

Alankar Traders

Shree Ganpati Enterprises

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

R K BUILDERS

M/S VIKRAM AND SONS

MOHAN LAL GUPTA