MISC REPAIR INCLUDING PAINTING TO CHARPOY MS TUBING AND CHARPOY GI PIPE PLYWOOD TOP AND TABLES UNDER GE MISSAMARI

Amount

CHARPOY IP WITH HARD TOP (FD/MAP-II/01) M&L for fixing Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked to CHARPOY IP WITH HARD TOP as shown in drawing No. FD/MAP-II/01 including removal od unserviceable one, complete all as specified and directed.

M&L for provision of LONG RAIL made of MS Tube 25x65mmX16 Gauge to CHARPOY IP WITH HARD TOP as shown in the drawing, including removal of unserviceable one, complete all as specified and directed by Engr-in-Charge.

Labour only all as per Item No. 02 but for SHORT RAIL obtained from U/S Long Rail of CHARPOY IP WITH HARD TOP.

All as per Item No. 02 but for STIFFENERS made of 25X25X16 Gauge of CHARPOY IP WITH HARD TOP.

All as per Item No. 02 but for LEGS made of 32X32X16 Gauge of CHARPOY IP WITH HARD TOP.

All as per Item No. 02 but for 25X60X6 MS CLEAT welded with frame to support ply of CHARPOY IP WITH HARD TOP.

All as per Item No. 02 but for 32X32X5 MS PLATE with 3mm thick rubber sheet fixed to it with adhesive welded to leg of CHARPOY IP WITH HARD TOP.

M&L for spot welding at the joints of CHARPOY IP WITH HARD TOP that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to CHARPOY IP WITH HARD TOP, complete all as specified and as directed.

CHARPOY GI PIPE WITH NYLON NEWAR (FD-220) M&L for fixing NYLON NEWAR GOOD QUALITY to CHARPOY GI PIPE WITH NYLON NEWAR as shown in drawing No. FD-220 including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

M&L for provision of LONG RAIL made of 32mm dia GI pipe of Class B quality conforming to IS 1239 of 1979 to CHARPOY GI PIPE WITH NYLON NEWAR as shown in the drawing including removal old unserviceable one, complete all as specified and directed by Engr-in-Charge.

Labour only all as per Item No. 11 but for SHORT RAIL of CHARPOY GI PIPE WITH NYLON NEWAR obtained from u/s Long Rail.

Labour only all as per Item No. 11 but for LEG of CHARPOY GI PIPE WITH NYLON NEWAR obtained from u/s Long & Short Rail.

All as per Item No. 11 but for 32mm Dia GI ELBOW, ISI Mark of CHARPOY GI PIPE WITH NYLON NEWAR

All as per Item No. 11 but for 32mm Dia GI Check Nut, ISI Mark of CHARPOY GI PIPE WITH NYLON NEWAR

S & F of hard wood block at the bottom of leg duly screwed complete all as specified and directed by Engr-in-Charge

CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220) M&L for fixing Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked to CHARPOY GI PIPE WITH PLYWOOD TOP as shown in drawing No. FD-220 including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

M&L for provision of LONG RAIL made of 32mm dia GI pipe of Class B quality conforming to IS 1239 of 1979 to CHARPOY GI PIPE WITH PLYWOOD TOP as shown in the drawing including removal old unserviceable one, complete all as specified and directed by Engr-in-Charge.

Labour only all as per Item No. 18 but for SHORT RAIL of CHARPOY GI PIPE WITH PLYWOOD TOP obtained from u/s Long Rail.

All as per Item No. 18 but for LEG of CHARPOY GI PIPE WITH PLYWOOD TOP obtained from u/s Long & Short Rail.

All as per Item No. 18 but for 32mm Dia GI ELBOW, ISI Mark of CHARPOY GI PIPE WITH PLYWOOD TOP

All as per Item No. 18 but for 32mm Dia GI Check Nut, ISI Mark of CHARPOY GI PIPE WITH PLYWOOD TOP

S & F of hard wood block at the bottom of leg duly screwed as specified and directed by Engr-in-Charge

CHARPOY MS TUBING WITH HARD PLY TOP (CWE/TEZ/04) M&L for fixing Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked, all sides beeded screwed to MS Frame of CHARPOY MS TUBING WITH PLYWOOD TOP as shown in drawing No. CWE/TEZ/04 including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

M&L for provision of LONG RAIL made of MS Tube 25x65mmX16 Gauge to CHARPOY MS TUBING WITH PLYWOOD TOP as shown in the drawing, including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

Labour only all as per Item No. 25 but for SHORT RAIL obtained from U/S Long Rail of CHARPOY MS TUBING WITH PLYWOOD TOP

All as per Item No. 25 but for STIFFENERS made of 25X25X16 Gauge of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for HEAD REST, made of 32X32X16 Gauge of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for FOOT REST made of 32X32X16 Gauge of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for LEGS, made of 32X32X16 Gauge welded with 3X25 FI Clamp made to shape for MNF set, of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for 25X3 FI CLAMP welded with Frame and Leg to support to corners of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for 50X50X6 MS PLATE welded to leg of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for 12 th Particle board with PVC bidding screwed to its frame of HEAD REST of CHARPOY MS TUBING WITH PLYWOOD TOP.

All as per Item No. 25 but for 12 th Particle board with PVC bidding screwed to its frame of FOOT REST of CHARPOY MS TUBING WITH PLYWOOD TOP.

M&L for spot welding at the joints of CHARPOY MS TUBING WITH PLYWOOD TOP that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to CHARPOY MS TUBING WITH PLYWOOD TOP, complete all as specified and as directed.

CHARPOY FOLDING IP WITH HARD TOP (FD-388) M &L for fixing Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked, allsides beeded screwed to IP Frame of CHARPOY FOLDING IP WITH HARD TOP as shown in drawing No. FD-388 including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

M&L for provision of 35 mm HALF OF TOP FRAME RAIL (U) SHAPE made of conduit iron pipe for both head and foot side of CHARPOY FOLDING IP WITH HARD TOP as shown in the drawing, including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

All as per item No. 38 but for U SHAPE HEADER WITH LEG FOR BOTH SIDE made of 35mm iron pipe 2mm thick of CHARPOY FOLDING IP WITH HARD TOP.

All as per item No. 38 but for 3MM THICK FI STAY AS PER DRG SHAPE for support body rail from headers of CHARPOY FOLDING IP WITH HARD TOP.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to CHARPOY FOLDING IP WITH HARD TOP, complete all as specified and as directed.

BED HARD MAP (FD/E6/MAP/08(R)) M&L for fixing Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked, to BED HARD MAP as shown in drawing No. FD/E6/MAP/08(R) including removal of unserviceable one, complete all as specified and directed by Engr-in-Charge.

M&L for provision of LONG RAIL made of MS Tube 25x65mmX18 Gauge to BED HARD MAP as shown in the drawing, including removal od unserviceable one, complete all as specified and directed by Engr-in-Charge.

Labour only all as per Item No. 43 but for SHORT RAIL of BED HARD MAP obtained from U/S Long Rail

All as per Item No. 43 but for STIFFENERS made of 25X25X18 Gauge of BED HARD MAP.

All as per Item No. 43 but for HEAD REST, made of 18X18X18 Gauge of BED HARD MAP.

All as per Item No. 43 but for FOOT REST made of 18X18X18 Gauge of BED HARD MAP.

All as per Item No. 43 but for 18mm thick teak face Particle board screwed to Head Rest frame of BED HARD MAP.

All as per Item No. 43 but for 18mm thick teak face Particle board screwed to Foot Rest frame of BED HARD MAP.

All as per Item No. 43 but for LEG at Head Rest, made of 32X32X18 Gauge of BED HARD MAP.

All as per Item No. 43 but for LEG at Foot Rest, made of 32X32X18 Gauge of BED HARD MAP.

M&L for spot welding at the joints of BED HARD MAP that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

Supply and Fixing of rectangular PVC SHOE of superior quality (as approved) to BED HARD MAP including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to BED HARD MAP, complete all as specified and as directed.

TABLE OFFICE CLERK STEEL (FD-84, FD-1004) M&L for TOP of TABLE OFFICE CLERK STEEL of teak face Prelaminated Particle Board 19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 4.0 mm thick all round as shown in Drawing No FD-84,1004 including removal of unserviceable one, complete all as specified and as directed.

M&L for 25mm Square Pipe LEG made of 1.6mm thick Mild Steel Sheet for TABLE OFFICE CLERK STEEL as shown in Drawing No. FD-84,1004, complete all as specified and as directed.

All as per Item No. 56 but for LONG STIFFENER/LONG TOP RAIL of TABLE OFFICE CLERK STEEL.

All as per Item No. 56 but for SHORT STIFFENER / SHORT TOP RAIL of TABLE OFFICE CLERK STEEL.

M&L for DRAWER made of 1.0mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown in Drawing No. FD-84,1004 including removal of unserviceable one, complete all as specified and as directed.

M&L for fixing of LOCK (approved quality and make) of Drawer of TABLE OFFICE CKERK STEEL as shown in Drawing No. FD-84 & FD-1004 including removal of unserviceable one, complete all as specified and as directed.

M&L for spot welding at the joints of TABLE OFFICE CLERK STEEL that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal old worn out PVC Covering on recessed handle of drawer of TABLE OFFICE CLERK STEEL and S&F new one of approved quality, complete all as specified and as directed.

Supply and Fixing of rectangular PVC SHOE of superior quality (as approved) to Leg of TABLE OFFICE CLERK STEEL including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE OFFICE CLERK STEEL, complete all as specified and as directed.

TABLE OFFICE OFFICER STEEL (FD-84, FD-1003) M&L for TOP of TABLE OFFICE OFFICER STEEL of teak face Prelaminated Particle Board 19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 4.0 mm thick all round as shown in Drawing No FD-84,1003 including removal of unserviceable one, complete all as specified and as directed.

M&L for 25mm Square Pipe LEG made of 1.6mm thick Mild Steel Sheet for TABLE OFFICE OFICER STEEL as shown in Drawing No. FD-84,1003, complete all as specified and as directed.

All as per Item No. 66 but for LONG STIFFENER/LONG TOP RAIL of TABLE OFFICE OFFICER STEEL.

Labour only all as per Item No. 66 but for SHORT STIFFENER / SHORT TOP RAIL obtained from U/S Long Top Rail of TABLE OFFICE OFFICER STEEL.

M&L for DRAWER made of 1.0mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown in Drawing No. FD-84,1003 including removal of unserviceable one, complete all as specified and as directed.

M&L for fixing of LOCK (approved quality and make) of Drawer of TABLE OFFICE OFFICER STEEL as shown in Drawing No. FD-84 & FD-1003 including removal of unserviceable one, complete all as specified and as directed.

M&L for spot welding at the joints of TABLE OFFICE CLERK STEEL that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal old worn out PVC Covering on recessed handle of drawer of TABLE OFFICE CLERK STEEL and S&F new one of approved quality, complete all as specified and as directed.

Supply and Fixing of rectangular PVC SHOE of superior quality (as approved) to Leg of TABLE OFFICE CLERK STEEL including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE OFFICE CLERK STEEL, complete all as specified and as directed.

TABLE 3'X2' WITH & WITH OUT DRAWER STEEL (FD1008/1007) M&L for TOP of TABLE 3'X2' WITH & WITH OUT DRAWER STEEL with teak face Prelaminated Particle Board 19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 4.0 mm thick all round as shown in Drawing No. FD-1007/1008 including removal of unserviceable one, complete all as specified and as directed.

M&L for 25mm Square Pipe LEG made of 1.6mm thick Mild Steel Sheet for TABLE 3'X2' WITH & WITH OUT DRAWER STEEL as shown in Drawing, complete all as specified and as directed.

All as per Item No. 76 but for LONG STIFFENER/LONG TOP RAIL of TABLE 3'X2' WITH & WITH OUT DRAWER STEEL.

All as per Item No. 76 but for SHORT STIFFENER / SHORT TOP RAIL of TABLE 3'X2' WITH & WITH OUT DRAWER STEEL.

M&L for DRAWER made of 1.0mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER STEELas shown in Drawing including removal of unserviceable one, complete all as specified and as directed.

M&L for fixing of LOCK (approved quality and make) of Drawer of TABLE 3'X2' WITH DRAWER STEELas shown in Drawing No. FD-1008 including removal of unserviceable one, complete all as specified and as directed.

M&L for spot welding at the joints of TABLE 3'X2' WITH & WITH OUT DRAWER STEELthat have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

M&L for removal old worn out PVC Covering on recessed handle of TABLE 3'X2' WITH & WITH OUT DRAWER STEEL and S&F new one of approved quality, complete all as specified and as directed.

Supply and Fixing of rectangular PVC SHOE of superior quality (as approved) to Leg of TABLE 3'X2' WITH & WITH OUT DRAWER STEEL including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE 3'X2' WITH DRAWER STEEL, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE 3'X2' WITH OUT DRAWER STEEL, complete all as specified and as directed.

TABLE 900 x 900 x 760 MM STEEL W/O DRAWER (FD- 1009) M & L for TOP of TABLE 900x900x760MM STEEL W/O DRAWER with teak face Prelaminated Particle Board 19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 4.0 mm thick all round as shown in Drawing No. FD-1009 including removal of unserviceable one, complete all as specified and as directed.

M&L for 25mm Square Pipe LEG made of 1.6mm thick Mild Steel Sheet for TABLE 900x900x760MM STEEL W/O DRAWER as shown in Drawing, complete all as specified and as directed.

All as per Item No. 87 but for EQUAL STIFFENER at top side of TABLE 900x900x760MM STEEL W/O DRAWER.

M&L for spot welding at the joints of TABLE 900 X 900 X 760 MM STEEL W/O DRAWER that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

Supply and Fixing of rectangular PVC SHOE of superior quality (as approved) to Leg of TABLE 900x900x760MM STEEL W/O DRAWER including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE 900x900x760MM STEEL W/O DRAWER., complete all as specified and as directed.

TABLE DINING ORs (FD-165(M)) M&L for TOP of TABLE DINING ORs made of Block Board 19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY) with 22 Gauge Aluminium sheet on top, as shown in Drawing No. FD-165(M) including removal of unserviceable one, complete all as specified and as directed.

M&L for 25mm Square Pipe LEG made of 1.6mm thick Mild Steel Sheet for TABLE DINING ORs as shown in Drawing, complete all as specified and as directed.

All as per Item No. 93 but for LONG STIFFENER/LONG TOP RAIL of TABLE DINING ORs.

All as per Item No. 93 but for SHORT STIFFENER / SHORT TOP RAIL of TABLE DINING ORs.

M&L for spot welding at the joints of TABLE DINING ORs that have become loose as shown in drawing and rubbing welded portion to obtain a smooth surface complete all as specified and as directed.

Supply and Fixing of rectangular PVC SHOE of superior quality (as approved) to Leg of TABLE DINING ORs including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for removal of spotted painting and rubbing of old rough surfaces by Sand Paper/Scrapper and finally painted with two coats of Synthetic Enamelled Paint (of approved quality and colour) over a coat of red oxide primer to TABLE DINING ORs, complete all as specified and as directed.

M/S K.K.TRADERS

M/S Singh Furniture Mart