SITC Of Submerged Centrifugal Pump Sets Including Electromechanical Work with One-Year Free Comprehensive Maintenance Guarantee For Water Supply Schame At Notified Area GIDC Sachin 2026-27

NAME OF WORK:- SITC Of Submerged Centrifugal Pump Sets Including Electromechanical Work with

One-Year Free Comprehensive Maintenance Guarantee For Water Supply Schame At

Notified Area, GIDC, Sachin 2026-27.ed Area Authority, GIDC, Sachin.

Item Qty. DESCRIPTION OF ITEM UNIT Rate/Unit

1 4.00 Providing submerged centrifugal pump sets (water KW 1208970.00

immersed, dry air filled, class "H" insulated TEWC

motor integrally mounted on volute casing pump sets for

water duty, 3-phase, 50 ± 3% Hz, 415 ± 10% V along

with suitable foundation / installation device with cable

length from pumps to panels & of following Material of

Construction: Impeller: CF8M, Casing: C.I. FG

Wearing Ring: SS, TC mechanical seal, CS/SS bearing,

SS shaft with sleeve, SS strainer & MS motor body.

Vertical submerged centrifugal pump sets

260 M3/Hr and 72 Mtr head, (2W + 2S)

2 4.00 Expansion Below No. 8192.00

Supply, installation, testing & commissioning of flange

ends expansion bellow as per EJMA standards of

overall length of minimum 300 mm, designed for

mm axial compression and 5 mm axial extension with

tie rods etc. of following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304; Internal sleeve: SA

240 Gr. 304; Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS 6392) & Limit

rods & nuts: CS - IS

5 4.00 Reflux valves Nos. 28776.00

Supply, lowering, laying, and jointing of ISI mark CI

D/F reflux valve as per IS: 53112 (latest edition) of

follwing class and diameter including alll taxes,

insurance, transportation, frieght charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental strores, stacking, cost of all labour, jointing

material, nut blots and giving satisfactory

hydraulictesting, etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark

6 1.00 Butterfly Valves Nos. 2891.00

Supply, lowering, laying, and jointing of ISI mark CI

D/F Butterflv Valves as per IS:13095 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete., & L,L& J

of SV/ AV/BFV/RV:- Lowering, laying and jointing in

position following C. I. / D/F Reflux valves, Butterfly

valves. Sluice valves and Air valves includina cost of all

labour, jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete. PN 1.6

10 1.00 Air valves Nos. 16427.00

Providing and supplying C.I Temper proof Air valves

with SS 304 float gun metal- nozzle of approved make

& quality of following class and diameter including all

taxes, insurance, trasportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental store, stacking etc. complete.

With Isolating sluice valve PN 1.6 80mm

11 500.00 MS Specials flange ended Kg. 98.00

1) Up to 300mm dia.

12 500.00 2) Above 300mm dia. Kg. 98.00

13 48.00 MS Pipe:- Supply, lowering, laying, and jointing of RMT 3640.00

Electric Resistance Welded (Up to 400mm)/Submerged

Arc Welded(Above 400mm) M.S.Pipe having beveled

ends plate or coil conforming to IS-3589-2001 or its

latest revision/ ammendment for following thickness

outside diameter at GWSSB store or site anywhere in

Gujarat State including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading conveyance to Departmental

stores, stacking etc. all complete. (Rate for MS Pipe

based on the ex. works price of HR Coil as Rs.58500 per

MT - withouth GST (Above 3.15 mm to 10 mm) & Rs.

59000.00 per MT without GST (Above 10 mm) as

onJan-23.( WPI Index of H. R Coil of Dec-22 is 144) and

Lowering, laying, jointing & welding in position to

correct line & level M.S. Pipe with outerside 3 LPE

coating & inside solvent free liquid epoxy lining on

pedestal or chairs upon prepared formation or prepared

bedding in trenches the rates include conveyance from

store to site of work loading, unloading, heat shrink sleev

jointing hydrotesting etc.complete.

I/S Solvent free Liquid Epoxy Lining (406 micron) +

O/S 3 LPE Coated M. S. Pipe., Pipe dia in OD

5.0mm thickness

14 12.00 Pipe dia in OD 323.9mm, 5.6mm thickness RMT 4650.00

15 18.00 Pipe dia in OD 355.6mm, 5.6mm thickness RMT 5106.00

16 12.00 Pipe dia in OD 508.0mm, 5.6mm thickness RMT 7293.00

17 65.00 Welding RMT 681.00

Welding in all positions with required number runs, for

M.S.Pipes internally and/or externally including gauging

wherever necessary, fixing appurtenances and other

accessories in connection with pipe laying work as per

specification.As Above for Butt joint:Plate thickness

1) welding for Pipe thickness 4mm to 7mm

18 65.00 Gas Cutting of MS Pipe / Plates RMT 56.00

Gas cutting(Either square cut or V cut) pipes, plates etc.

including all costs for the followng thickness.

2) Above 5mm up to 10mm

19 1.00 Full Bore Electromagnetic Flow Meter- Regular Power No. 147864.20

Design, Supply, Installation, Testing, Commissioning of

Full Bore Electromagnetic flow meter with factory

calibrated,Regular Power Operated, flanged connection,

Flow sensor, Indicator, transmitter and totaliser with all

accessories viz.surge arrestor, associated cables,

cabinets, hardwares, etc complete as per following

specifications:

Flow Transmitter/ Converter ( Remote Field Mounted):

Microprocessor based, Modular design, 2 line LCD for

indication of actual flow rate, forward, reverse, sum

totaliser display, ±0.5% accuracy at 0.3 to 4 m/sec

velocity, 4 to 20 mA with HART/Modbus output, one

scalable pulse, one status output, IP 67 protection, Die

cast aluminium/ polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with glass window

enclosure, Inbuilt EEPROM and Data Logger, 20 meters

cable length for sensor to transmitter communication etc

alongwith wall mounted/ stand mounted cabinet.

Full Bore Electromagnetic Flow Meter (Regular Power

(10) 300mm Nominal Bore

20 2.00 (11) 350mm Nominal Bore No. 204490.00

21 7.00 Pressure Gauges with Accessories Design, Supply, Nos. 2629.00

Installation, Testing, Commissioning of Diaphragm

sealed Pressure Gauge, ±1% accuracy, Direct bottom

1/2" NPT (M) process connection, IP 67, Glycerine

filled, SS304 Case with Bayonet Type Bezel, SS316 L

Diaphragm, SS316 Bottom Housing Material, SS

Movement material, Aluminium dial with black

graduation on white background, Micro Zero adjustable

pointer, neoprene gasket, Blow out disc, shatter proof

glass, SS tag plate etc as per IS

(a) 100 mm Dial Size, 0 to 10 Kg/cm2

22 1.00 LV PCC & MCC Panel Nos. 1767545.00

Design, Supply, Installation, Testing and

Commissioning of Power cum Motor Control Centre of

800A, 415, TPN, Power Cum Motor Control Centre

(PCC & MCC) cubical having depth not less than

mm throghout the required length & detachable,

fabricated from 2 mm CRCA sheet steel, free standing,

floor mounted, compartmentalized, extensible, dust and

vermin proof enclosure, duly painted provided with

required rating switch gears and shall be complete with

(a) required size of TPN Electrolyte 800 A Copper bus

bar having cross section not less than 1.6 Amp per

Sq. MM, (b) 800 Amp capacity of 4 pole- EDO

microproccessor based MOULDED CASE CIRCUIT

BREAKERS with RS 485 / RS 232 computer interface .

All release of all MCCB, VFD should have in built

power meter/ analyser having, 3 phase, V, KW, I, KVA,

KVAh, KVArh, PF, Frequency, harmonic analysis up to

30th harmonic and last ten faults history.with RS 485 /

RS 232 computer interface facility and all other required

protection etc., complete. The PCC & MCC panel shall

be supplied as per detailed specifications with remote

control Panel including ON/OFF Push Button &

indicator with emergancy stop & reference single line

diagram (SLD) and suitable for above pump set

complete or the instruction of Engineer In charge.

23 100.00 Supply, laying, testing & commissioning 1.1 kV grade, Rmt. 2005.00

XLPE insulated, stranded Copper conductor, galvanised

steel flat strip / round wire armoured, extruded PVC type

ST2 sheathed, heavy duty cable (to be laid on wall

surface with necessary clamps / in existing cable trench

/ cable trays / conduit / pipe sleeves at road crossing or

floor as per site requirement) conforming to IS:

(Part-1) & IEC: 60502 (Part-1) of following sizes: j )

24 60.00 Supplying & erecting FRLS-XLPE(IS:7098)(I)-88 ISI Mtr. 116.15

unarmoured copper cable 1.1 kV grade to be erected as

directed of following size. (A) 7 core 1.5 Sq. mm

25 60.00 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI Mtr 1747.30

armoured cable multistrand Aluminium conductor for

1.1 kV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

(K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core)

26 16.00 Cable Terminals (Lugs) Ea. 90.00

Providing & fitting crimping type Cable Terminals

(Lugs) conforming to IS of following types and sizes

Aluminium Tubular Terminals (Long Barrel) (in Sq.

mm.) q) 400 sqmm

27 24.00 Copper Tubular Terminals (Long Barrel) (in Sq. mm.), Ea. 88.00

28 4.00 Providing & fitting heavy duty brass cable glands Ea. 392.00

(nickel-plated) with washers & rubber ring conforming

to IS, suitable for 3, 3½ & 4 core cables of following

type & sizes: Double Compression Brass Cable Glands.,

30 5.00 Supplying rubber matting of following thickness as per Sq.Mtr 1027.17

31 60.00 Making trench in soft soil of suitable width of 90 cm Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface as

32 100.00 Providing & laying approved make Double walled Mtr. 95.95

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable., (C))90 mm outer dia

33 100.00 (D)120 mm outer dia. Mtr. 137.36

34 50.00 Supply & laying GI perforated type cable trays with Rmt 228.00

returned edge / flange, fabricated from 2.0 mm thk sheet

steel in the standard length of 2.5 mtrs, duly hot dipped

galvanized after fabrication as per IS 2629-1989 / IS

4759-1984 including accessories such as coupler plates/

fish plates, bends, tees, reducers, elbows, covers and

electro-galvanized hardware etc, erected on existing

support as per specification and instruction of Engineer-

in-charge. a) 100(W) x 35(H) x 2.0 mm Thick

35 50.00 Providing and erecting required size HOT deep Kg. 77.77

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper

36 6.00 Supplying & erecting earth pit of minimum bore Nos. 5760.03

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to

submit test certificate) & having back filling compound

of (B) Inner chemical (CCM Compound)- Resistivity:-

0.2 / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted. (b)For

Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

37 2.00 Providing and erecting approved make split air- Ea. 63765.34

conditioning unit consisting of copper condensing unit

with fan motor, hermetically sealed rotary compressor

with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories

by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes

powder coated Stand, Eco Friendly green gas charging,

15A plug top & Remote Control) with necessary core

(2)For ISEER Range (KWH/KWH) (4.0 to 4.49)

(c) for 2 ton capacity

I / We agree to carry out the above work at ____________ % above the estimated rate ((In Words)

_________________________________________________) percentage above the Estimated Tender Rate.

I / We agree to carry out the above work at ____________ % below the estimated rate ((In Words)

_________________________________________________) percentage below the Estimated Tender Rate.

Estimated Amount Estimated Amount

Put to Tender Rs. 86,22,492.41 Put to Tender Rs. .

Add % Above Rs. _____________ Deduct % Below Rs. ______________

Net Amount Rs.____________ Net Amount Rs. ______________

Net in Figure Rs. _____________ Net in Figure Rs. ______________

I / We have read the Condition mentioned in this tender and agree to abide by the same.

Note:- Estimated Cost put to tender is excluding GST and Including all other Taxes. GST will be paid additional

as per applicable rate prevailing from time to time and all other statutory liabilities are part of estimated

cost and will be bound by bidder. Prospective bidder may please by read carefully, app prevailing policy

/Government Resolution (GT) of Govt. of Gujarat (GoG)/competent authority, regarding GST and

submit the price bid offer accordingly.

Signature of Contractor with Seal Sachin Notified Area,

G.I.D.C.-SACHIN