Loading…
Loading…
Tender Value
₹16.2 Cr
EMD Value
₹32.4 L
Closing Date
10 Aug 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (RSP)
TENDER
15 conditions · 4 needing a document upload
STANDARD FINANCIAL ELIGIBILITY CRITERIA: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-IX of Tender Document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet. NOTE for Special Financial Criteria: Tenderer(s) must submit documentary proof in regard to fulfilling these eligibility criteria along with their offer (Technical Bid). Each supportive documents/certificates from the organizations with whom they worked/ are working should be enclosed. The offers of tenderer(s) who do not meet the eligibility criteria as mentioned above shall not be considered. The tenderers who fail to submit documentary proof along with their offer will not be considered. Tenderer(s) may carefully note that their Contract Agreement for this work is liable to be terminated at any time later, in case any of the information furnished by them is found to be untrue or any adverse point comes to light subsequently. The decision of Railway administration in this regard shall be final and binding.
BID CAPACITY: Bid capacity clause as per IR GCC April 2022 with latest correction slips is applicable in this contact. Bid capacity shall be calculated as per Annexure-XVII of Tender Document. The tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender.
STANDARD TECHNICAL ELIGIBILITY CRITERIA: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, OR Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, OR One similar work costing not less than the amount equal to 60% of advertised value of the tender. NOTE for Special Technical Criteria: 1. Tenderer(s) must submit documentary proof in regard to fulfilling these eligibility criteria along with their offer (Technical Bid). Each supportive documents/certificates from the organizations with whom they worked/ are working should be enclosed. The offers of tenderer(s) who do not meet the eligibility criteria as mentioned above shall not be considered. The tenderers who fail to submit documentary proof along with their offer will not be considered. Tenderer(s) may carefully note that their Contract Agreement for this work is liable to be terminated at any time later, in case any of the information furnished by them is found to be untrue or any adverse point comes to light subsequently. The decision of Railway administration in this regard shall be final and binding. 2. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
SIMILAR NATURE WORK DEFINITION: "Supply & Fitment" of complete refurbishment including Electrical & Mechanical Work of LHB or conventional Coaches in any unit of Indian Railways/Public Sector Unit undertakings (PSUs). "Re-furbishment" would mean supply and installation of flooring, wall paneling, ceiling, replacement or repair of seats and berths, toilet of Coach in the interior of coach. OR Complete Manufacturing of Metro Coaches Rolling Stock including its Roof Ceiling Panels, side wall panel, seats, doors, gangway & electrical items in any unit of Indian Railways/Public Sector Unit undertakings or any other coach production unit in India. OR Complete refurbishment activity including Mechanical & Electrical work for passenger carrying Metro Coaches / EMU / DMU / trainset for Repair & Replacement of side wall panel, roof ceiling panel, flooring, electrical panels, doors and gangway in any unit of Indian Railways/Public Sector Unit undertakings or any other coach production unit / Railway repair and maintenance work shop / Divisional Railways in India or internationally
29 conditions · 8 needing a document upload
Whether all the documents regarding fulfillment of Bid capacity Eligibility Criteria have been uploaded by tenderer?
Whether the list of Plant and Machinery proposed to be inducted (own and hired) for the subject work has been uploaded as per Annexure- IV of Tender Document?
Whether the details of works carried out during Last Seven Financial Years and Current Financial Year have been uploaded as per Annexure- II of Tender Document?
Whether the list of Particulars of Technical Staff to be employed on the work has been uploaded as per Annexure-V of Tender Document?
Whether the GSTIN Registration certificate and PAN Card has been uploaded ?
Whether the documentary proof regarding the fulfilling of Technical Eligibility Criteria has been uploaded?
Whether the documentary proof regarding the fulfilling of Financial Eligibility Criteria has been uploaded?
Whether the document related to Sole proprietorship, Partnership firm, Company / Cooperative Society etc. has been uploaded?
Whether the list of works in hand as per Annexure-III of the Tender document has been uploaded ?
Whether the documents related to Bank Details has been uploaded?
Whether the details of works carried out during previous three Financial Years have been uploaded as per Annexure- II A of the Tender Document?
Whether the Power of Attorney (if applicable) has been uploaded?
Please Fill and submit tender form (first sheet) given in Tender Document.
All the documents as per Clause 4 and 4.1 of General Conditions of contract of Tender Document (as applicable) to be submitted by the tenderer.
All the documents (as applicable) as per Annexure- I to XVIII of Tender document to be submitted by the tenderer.
All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law. (Please upload certificate of GSTIN registration)
At the time of submission of bid, if you have any special condition then upload in scanned PDF copy. Any deviation from the stipulated condition to be quoted as per Annexure-XV of Tender Document. However , The Railway shall have the right to incorporate/ consider any such condition/ deviation quoted by Tenderer, in the contract, at its discretion.
The tenderer whether sole proprietor / a company or a partnership firm / registered society/ registered trust/ HUF/LLP etc. , if they want to act through agent or individual partner(s), should submit along with the tender, a copy of Power of Attorney duly stamped and authenticated by notary public or by magistrate in favour of the specific person whether he/ they be partner(s) of the firm or any other person, specifically authorising him/them to sign the tender, submit the tender and further to deal with the Tender/Contract up to the stage of signing the agreement except in case where such person is authorized for above purposes through a provision made in the Partnership deed/Memorandum of Understanding/ Articles of Association/Board Resolution failing which the tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed The Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Upgradation of toilets in 160 Nos. LHB Non-AC coaches and 20 Nos. LHB AC coaches (RSP Pink Book No. 320/2024-25) at Mechanical Workshop, Izatnagar (As Per Scope of Work) for a period of 02 years.
M-246-1-15-26-27-OT-14
M-246-1-15-26-27-OT-14
Open
Works - General
24 Months
Bareilly, Uttar Pradesh
₹0
₹32.4 L
10 Aug 2026
18 Jul 2026
27 Jul 2026
124 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 10,49,02,123.2 | ||
| — | — | — | Above/ 23011744.00 Below/P | ||
| Walls - Cost of Supply and fitment of Fire barrier decorative coating for Improved aesthetics and anti-graffiti properties Including complete repair of FRP walls before painting (as per MMDTS 20046 or latest) Including GST @ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 3281708.80 Below/P | ||
| Ceiling - Cost of Supply and fitment of Existing Ceiling of Toilet Inside to be replaced with 5mm ALUCO Bond / DGFRP Ceiling (as per RCF Drg No. 310113.0.21.45.0.040 DGFRP MDTS46303 or (latest) Including GST @ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 12318112.00 Below/P | ||
| Toilet Door -Cost of Supply and fitment of Existing Toilet Door to be replaced with DGFRP door/ Decorative paint 20046 (as per Drg.No - LW- 56424/LW- 56475) Including GST @ 18% | — | 640.00 | — | — | |
| — | 640.00 | — | — | ||
| Wash Basin - Cost of Supply and fitment of Wash Basin Bowl along with counter top to be made of Aluminum Polymer Composite Material (as per Drg.No. JUDW/ MECH/ 24-860, Alt-1 (item no.1,3 &4). MMDTS-18008Rev01(latest) Including GST @ 18% | — | — | — | 99,09,664 | |
| — | — | — | Above/ 13720294.40 Below/P | ||
| Dustbin - Cost of supply and fitment Dustbin to be provided of Aluminum Polymer Composite Material below the wash basin counter top (as per Drg. No.- JUDW/MECH/24-860, Alt.1 EXCEPT ITEM NOS. 1, 3 & 4. MMDTS -18008Rev 01 (latest) Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 7239590.40 Below/P | ||
| Mirror -Cost of supply and fitment Large size flushed mirror of 5mm thickness with frame of Aluminum Polymer Composite Material inside Toilet (as per Drg. No.-JUDW/ MECH/20-696, MMDTS- 18008 Rev 01 (latest) Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 464800.00 Below/P | ||
| Toilet Light- Cost of supply and fitment Concealed LED Light (As per RDSO Specification RDSO/PE/SPEC/TL/0091-2016 (Rev '1') Including GST@ 18% | — | 726.25 | — | — | |
| — | — | — | Above/ 2201760.00 Below/P | ||
| Cost of supply and fitment Tap along with health faucet - Health faucet to be provided in each toilet with two-way Bib Tap. (Bib cock as per Model No F280003CP of Hindware, Health Faucet as per Model No. F1610110CP of Hindware) Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 188995.20 Below/P | ||
| Cost of supply and fitment of Toilet Paper Dispenser - Stainless Steel or ABS Plastic Paper Roll Holder for Western Style toilet (as per Kimberley Clark Model no.69460 or similar Make SUSA/Jaquar/ Kohler/Cera/ Kimberley Clark) Including GST@ 18% | — | 160.00 | — | — | |
| — | — | — | Above/ 6269830.40 Below/P | ||
| Cost of supply and fitment of Bacteria Neutralizer Dispenser - Bacteria Neutralizer dispenser with inbuilt air circulation system along with bio-enzyme bacterial refills in built with fragrance. (As per RDSO/2008/CG-11(latest) or equivalent) Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 224051.20 Below/P | ||
| Cost of supply and fitment of Western Commode Lid Cover - Heavy Duty Commode lid with auto retractor seat cover (As per Brand - Alpine, Tip Top, Susa or equivalent) Including GST@ 18% | — | 160.00 | — | — | |
| — | — | — | Above/ 1411238.40 Below/P | ||
| Soap Dispenser - Cost of supply and fitment of Modular type manual wall mounted liquid soap dispenser with inbuilt lock & key feature (As per Brand/Make: Bobrick, Dolphin, Gojo, Merida, ACME, SUSA) Capacity- Approx. 1000ml. (Any model of above brands) Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 1438720.00 Below/P | ||
| Cost of supply and fitment of Water taps for inside of toilet at wash basin- Quarter turn Bib Cock (As per (Brand/Make - F280002CP of Jaquar/Hindware/ Kohler/Grohe/ Dolphin/ Toto/Susa) Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 1561905.60 Below/P | ||
| Cost of supply and fitment of Toilet bowl seat cover for Western Commode - In case of coaches not fitted with Bio Vacuum Exiting Western Commode shall be covered with Aluminium Polymer Composite Material. (as per Drg No. JUDW/MECH/18- 669MCFSpec.MMDTS-18008 (latest) or equivalent) Including GST@ 18% | — | 160.00 | — | — | |
| — | — | — | Above/ 1692192.00 Below/P | ||
| Cost of supply and fitment of PU coated Grab Bar - Disabled friendly grab bar to be used inside toilet door, As per Drawing No: LE63158 along with the Anti-Skid PU SkinIncluding GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 15506400.00 Below/P | ||
| Cost of supply and fitment of Toilet Inlay-FRP or Decorative Polymerized composite panel (TDPCP) floor inlay for Indian pan and Western inlay (As per Make Kommerling/Alupast/Alstone)Including GST@ 18% | — | 640.00 | — | — | |
| — | — | — | Above/ 2180073.60 Below/P | ||
| Cost of supply and fitment of Indian pan- Existing Pan to be replaced with new pan with functionality of LHB Type pan Including GST@ 18% | — | 480.00 | — | — | |
| — | — | — | Above/ 2281043.20 Below/P | ||
| Cost of supply and fitment of All types of Aluminum Profiles- Profiles/ Angles/ Flats of Aluminum Including GST@ 18% | — | 640.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1A21-LW64143ALTJ.pdf
ATTACHMENT
1A21-LW64144ALTiAnnex-1.pdf
ATTACHMENT
1A25-Mech-816Mouldings.pdf
ATTACHMENT
1A32iii-LE64161_d.pdf
ATTACHMENT
1A32ii-LE64160-c-ANX-1-1-1--A3.pdf
ATTACHMENT
1A32i-LE64159_b.pdf
ATTACHMENT
1A32iv-LD64151-d-ANX-1-1-1--A3.pdf
ATTACHMENT
1A32ixLE64166-c-ANX-1-1-1--A3.pdf
ATTACHMENT
1A32viiiLD64143_a.pdf
ATTACHMENT
1A32vii-TRISPELNR_14730.pdf
ATTACHMENT
1A32vi-LD64144-c-ANX-1-1-1--A3.pdf
ATTACHMENT
1A32v-LD64145_c.pdf
ATTACHMENT
1-MMDTS20046.pdf
ATTACHMENT
2A-16-110113030300001FR11OF3.pdf
ATTACHMENT
2A-16-110113030300001FR12OF3.pdf
ATTACHMENT
2A-16-110113030300001FR13OF3.pdf
ATTACHMENT
2A16-FRPINLAYDRAWINGS6318963107.pdf
ATTACHMENT
2A-16-LG63227_c_2of3.pdf
ATTACHMENT
2A-26-xiiCC64002_a.pdf
ATTACHMENT
2A-26-xiii-LG64131_b.pdf
ATTACHMENT
2A-MDTS-46303_DGFRP.pdf
ATTACHMENT
2B24-LP64257_a.pdf
ATTACHMENT
2B24-LP64258.pdf
ATTACHMENT
2B26xiCC64002_a.pdf
ATTACHMENT
2-otherdrawings.pdf
ATTACHMENT
3-iv-RDSO_PE_SPEC_TL_0091_2016Rev_1.pdf
ATTACHMENT
4-6-7-14-5-MMDTS18008.pdf
ATTACHMENT
5-MDTS-44289REV-NIL.pdf
ATTACHMENT
10-RDSO-2008-CG-11.pdf
ATTACHMENT
15-MMDTS19027Rev.-01.pdf
ATTACHMENT
18-LE63158grabbar.pdf
ATTACHMENT
32xi-140-6-4-048-1-1-SD--A1.pdf
ATTACHMENT
ICF-MD-SPEC-253.pdf
ATTACHMENT
MDTS-133REV.05.pdf
ATTACHMENT
REVISEDDRAWING.pdf
ATTACHMENT
12345678.pdf
ATTACHMENT
TDLHBToiletUpgradationFloated_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .