E-TENDER Annual Plan-UKM GP Pro 68/26 R E N O V A T I O N O F S C H O O L S - RENOVATION OF SCHOOLS-General Civil Work

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD467163/2025-2026:Providing and fixing galvanised iron profile sheets (size,shape and pitchof corrugation as approved by Engineer incharge) .35 mm(+.05%) .total coated thickness with zinc coating 120 grams per sqm as per IS277,240mpa steel grade ,5-7 microns epoxy primer on both sides of sheet and polyester top coat 15-18 Microns.sheet should have protective guard film of25 microns minimum to avoid scratches during trasportation and should supplied in single length up to 12 metre or as desired by Engineer -in-charge .The sheet shall fixed using self drilling /selftapping screws of size (5.5*55mm) with EDPM seal,complete up to any pitch in horizontal/vertical or curved surface,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required. Detailsof cost for216.14sqm (External diamensions of plinth . Area of roof =20.20*107m =216.14sqm. sheet used =20nos*10.70m*1.06m=226.84sqm and 3%wastage=6.81 Total 233.65sqm.

OD467164/2025-2026:Providing and fixing150 mm dia PVC gutter pvc rectangular semicircular section including fitting with 20*5 mm ms flat supporters at .75 m interval including cost and conveyance and labour charges etc complete

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.112.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shadeOld work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)