Development of Archery shooting Range near athletic ground at North Ordnance Estate at AFK.

Amount

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base-Solids

Supply of Moorum/Red bajri as directed by Engr-In-Charge

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m- All kind of soil.

M&L, for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,-Hard / dense soil

M&L ,for nominal mix Concrete, Type C2, 1:3:6, M10, using 40mm coarse aggregate etc. in foundation, filling etc. complete

M&L ,for Cement Concrete, B2, 1:2:4 by using 40mm aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

M&L, for Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter - for rough finished surfaces of concrete

M&L , for Walling of randam rubble, uncoursed as in cement mortar 1:6

Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber, except material- spread thickness 200mm

M&L , Boulder pitching, laid dry, hand packed tightly grouted with cement and sand mortar 1:6

Brickwork with fly ash bricks (modular bricks) , straight or curved on plan exc 6m mean radius, built in CM 1:6 .

M&L, Rendering sand faced plaster 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4

Supply Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wire , any mesh, size and type to any type of standards, rails, straining blts, etc. including provission f binding wire.

S&F, Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F, Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F, Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L, for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

UNICON (BID ID -753682)

Ambaji Corporation (BID ID -757022)

V C SHETH (BID ID -756901)

S AND J BUILDCON PVT LTD (BID ID -754462)