Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 CrAdmitted-Finance | ₹1.7 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.5 Cr+₹1.7 Cr (102.3%)Admitted-Finance 17 18 GIDC ESTSTE NADIAD ROAD PETLAD ANAND GUJARAT 388450 | ANAND | GUJARAT | 388450 | ₹3.5 Cr+₹1.7 Cr (102.3%) | L2 | Admitted-Finance |
| 3 | L3₹3.5 Cr+₹1.8 Cr (104.9%)Admitted-Finance 2 496 A TOG ROAD KALAMASSERY ERNAKULAM ERNAKULAM KERALA 683104 | ERNAKULAM | KERALA | 683104 | ₹3.5 Cr+₹1.8 Cr (104.9%) | L3 | Admitted-Finance |
| 4 | L4₹3.6 Cr+₹1.9 Cr (109.6%)Admitted-Finance | ₹3.6 Cr+₹1.9 Cr (109.6%) | L4 | Admitted-Finance |
| 5 | L5₹3.8 Cr+₹2.1 Cr (120.2%)Admitted-Finance | ₹3.8 Cr+₹2.1 Cr (120.2%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GLOBAL TECHNOCRATS PVT. LTD. L1 | GURUKRUPA WIRE NETTING INDUSTRIES L2 | UNIVERSAL FABRICATORS L3 | M/S J K ENGINEERING WORKS L4 | M/s Hi Tech Builders and Manufacturers L7 | M/S LONE BUILDERS AND SUPPLIERS L8 | M/S TARIQ ENGINEERING WORKS L5 | S.G.ENGINEERS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 4300mm length including detachble 'Y' arm. The length of one arm 800mm. Sectional weight 5.8 Kg per mtr As per drawing attached . Technical Specification as per Appendix 'A' att 04 Nos 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. | |||||||||||
| 1.01 | Uri/Mohura | 1,582 | Nos | - | 23,31,868 ₹23,31,868 | 22,11,636 ₹22,11,636 Lowest | 22,54,350 ₹22,54,350 | 31,64,000 ₹31,64,000 | 31,48,180 ₹31,48,180 | 24,07,804 ₹24,07,804 | 23,73,000 ₹23,73,000 |
| 1.02 | Naugam | 1,140 | Nos | - | 16,80,360 ₹16,80,360 | 15,89,160 ₹15,89,160 Lowest | 16,18,800 ₹16,18,800 | 22,80,000 ₹22,80,000 | 22,68,600 ₹22,68,600 | 17,35,080 ₹17,35,080 | 16,98,600 ₹16,98,600 |
| 1.03 | Boniyar/Rampur | 1,847 | Nos | - | 27,22,478 ₹27,22,478 | 25,71,024 ₹25,71,024 Lowest | 26,22,740 ₹26,22,740 | 36,94,000 ₹36,94,000 | 36,75,530 ₹36,75,530 | 28,11,134 ₹28,11,134 | 27,33,560 ₹27,33,560 |
| 1.04 | Ziran/Gulmarg | 322 | Nos | - | 4,74,628 ₹4,74,628 | 4,47,580 ₹4,47,580 Lowest | 4,57,884 ₹4,57,884 | 6,44,000 ₹6,44,000 | 6,40,780 ₹6,40,780 | 4,97,812 ₹4,97,812 | 4,74,950 ₹4,74,950 |
| 2.00Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2700mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/4 dt 12 Jan 2011. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. | |||||||||||
| 2.01 | Uri/Mohura | 1,012 | Nos | - | 9,36,100 ₹9,36,100 | 9,15,860 ₹9,15,860 Lowest | 9,38,124 ₹9,38,124 | 12,75,120 ₹12,75,120 | 12,65,000 ₹12,65,000 | 9,35,088 ₹9,35,088 | 10,32,240 ₹10,32,240 |
| 2.02 | Naugam | 730 | Nos | - | 6,75,250 ₹6,75,250 | 6,58,460 ₹6,58,460 Lowest | 6,76,710 ₹6,76,710 | 9,19,800 ₹9,19,800 | 9,12,500 ₹9,12,500 | 6,74,520 ₹6,74,520 | 7,40,950 ₹7,40,950 |
| 2.03 | Boniyar/Rampur | 1,182 | Nos | - | 10,93,350 ₹10,93,350 | 10,63,800 ₹10,63,800 Lowest | 10,93,350 ₹10,93,350 | 14,89,320 ₹14,89,320 | 14,77,500 ₹14,77,500 | 10,92,168 ₹10,92,168 | 11,93,820 ₹11,93,820 |
| 2.04 | Ziran/Gulmarg | 206 | Nos | - | 1,90,550 ₹1,90,550 | 1,84,988 ₹1,84,988 Lowest | 1,90,550 ₹1,90,550 | 2,59,560 ₹2,59,560 | 2,57,500 ₹2,57,500 | 1,93,228 ₹1,93,228 | 2,07,030 ₹2,07,030 |
Tender Value
Refer Docs
EMD Value
₹8.8 L
Closing Date
13 Jul 2020, 2:00 pmClosed
CO, 22 Engineer Regiment
22 Engineer Regiment Pin-914022 C/o 56 APO
Supply of op wks store
2020_ARMY_355034_1
1326/15 /2020-21/22ER/OPW
Open Tender
Miscellaneous Goods
Supply
90 days
Uri, Rampur, Naugam, Buniyar, Gulmarg, Pattan
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8.8 L
Yes
19 Aug 2020
23 Jun 2020
14 Jul 2020
23 Jun 2020
13 Jul 2020
29 Jun 2020
23 Jun 2020 - 29 Jun 2020
Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 4300mm length including detachble 'Y' arm. The length of one arm 800mm. Sectional weight 5.8 Kg per mtr As per drawing attached . Technical Specification as per Appendix 'A' att 04 Nos 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2700mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/4 dt 12 Jan 2011. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2100mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/4 dt 12 Jan 2011. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 1500mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Jul 2013. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Alpha Fence Supply of High Security Weld Mesh Panels as per below spec. Mesh Wire : Horizontal wire, Dia 4.0 mm (+/- 0.05mm) : Vertical wire, Dia 4.0 mm (+/-0.05mm) Mesh Size: Mesh Size of 12.7 X 76.2 mm along Mesh ( Mesh Wire: IS 280 2006). Panel size &Weight : 2600X800mm : 20.52 Kg, Coating : Zinc coated 40-50GSM &60 to 80 microns of Powder coating Color: RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength: Min 550 N/Sq.mm. Weld tensile strength: Min 70 % of Wire tensile strength. Note: High Security Weldmesh is been installed at the bottom.. Ref Drawing No :NC/LC/A4/V2.2. Material: MS Mesh Wire: Dia:4mm: IS 280 2006 Coating :IS 4826 – 1979 Weld Mesh as per : EN 10223-7
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Supply of Weld Mesh Panels as per below spec. Mesh Wire :Horizontal wire, Dia 5.0 mm (+/- 0.05mm) : Vertical wire, Dia 4.5 mm (+/-0.05mm)Mesh Size: Mesh Size of 50 x 100 mm - V Bend &50X200 mm (+/- 2 mm) along Mesh ( Mesh Wire: IS 280 2006). Panel size &Weight : 2600X800 : 9.3 Kg, Coating : Zinc coated 40-50GSM &60 to 80 microns of Powder coating. Color:RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength:Min 550 N/Sq.mm. Weld tensile strength:Min 70% of Wire tensile strength. Note: Weldmesh is installed vertically above the High Security Weldmesh Ref Drawing No :NC/LC/A4/V2.2. Material: MS Mesh Wire: Dia:4mm: IS 280 2006 Coating :IS 4826 – 1979 Weld Mesh as per : EN 10223-7
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
(Bravo Fence) Weld Mesh Panels: Mesh Wire : Horizontal wire, Dia 5.0 mm (+/- 0.05mm) : Vertical wire, Dia 4.5 mm (+/-0.05mm) Mesh Size : Mesh Size of 50 x 100 mm - V Bend &50X200 mm (+/- 2 mm) along Mesh as per dwg. ( Mesh Wire: IS 280 2006). Panel size (W &H) &Weight ( Tol +/-5%) 2600X1000mm : 11.02 Kg, Coating :Zinc coated 40-50 GSM&60 to 80 microns of Powder coating Color: RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength: Min 550 N/Sq.mm. Weld tensile strength: Min 70 % of Wire tensile strength. Ref Drawing No : NC/LC/A4/ V2.2. Mesh Wire: IS 280 2006 Coating :IS 4826 – 1979 Material: MS Material Weld Mesh as per:EN 10223-7
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Fence Post : Type : Circular Hollow section Dimensions : 89mm,Dia, 3 mm (3mm +/- 0.3mm) Thickness: All tolerances as per IS specn IS: 1239 Length : 3.4 mtrs (2.7 mtrs above ground level + 0.7 mtrs under the ground level). Weight: 21.6 Kg (+/-5 %) Coating : Hot Dip glvanised to minimum 350 GSM Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123 Ref Drawing No :NC/LC/A6/V2.2. Fence Post- IS: 1239 Material: MS Steel Tube
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Truss support Post with Rail end Cap : Type : Circular Hollow section. Dimensions :76mm Dia, 3 mm (3mm +/- 0.3mm). Rail End Cap Fitting -76 mm (Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism). Thickness: All tolerances as per IS specn IS:1239. Length &Weight. 1. Truss support for across the slope condition. Length :1800mm, Weight : 9.65 Kg (+5%). Coating : Hot Dip galvanised to minimum 350 GSM. Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Truss support Post with Rail end Cap : Type : Circular Hollow section. Dimensions :76mm Dia, 3 mm (3mm +/- 0.3mm). Rail End Cap Fitting -76 mm (Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism). Thickness: All tolerances as per IS specn IS:1239. Length & Weight. 1. Truss support for along the slope condition. Length:3100mm, Weight : 16.6 Kg (+5%).. Coating : Hot Dip galvanised to minimum 350 GSM. Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123. Ref Drawing No:NC/LC/A1/V2.2. Fence Post- IS: 1239. Coating - as per IS 2629 / IS 4759 /ASTM A 123. Material: MS Steel Tube Tangdhar Nos 640
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Straining Y-Arm for supporting top PTCC: Material : CHS of 76mm and 3.2mm guage as per IS 1852. Coating : Hot dip galvanized to Min 350 GSM as per IS 4759/2629, Length of 1 Arm is 510 mm,outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post and fixed with two Nos mushroom head bolt and nut (M8x25mm). Straining Y-Arm will manufactured as per drawing attached. Straining Y Arm will be installed at every 30 mtrs except intermediate arm post.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Intermediate Y-Arm for supporting top PTCC: Material: CHS of 48.3mm and 2.90mm guage as per IS 1852 Coating :Hot dip galvanized to Min 350 GSM as per IS 4759 / IS 2629.Length of 1 Arm is 510 MM , Angle between the two arms is 120 degree , fixed with two Nos mushroom head bolt and nut (M8x25mm).Intermediate Y-Arm will manufactured as per drawing attached. Outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post. One Intermediate Y Arm will be installed at every post except the posts with Straining Y arms
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Razor Running tape: Blade profile : Tear Blade Core wire : 2.5 mm wire Dia +0.1mm, Length of each Coil : 95 Mtrs Weight of each coil : 9.2 Kg. Ref Drawing No : NC/LC/A2/V2.2. Specn for Steel Strip: IS 1730 Specn for wire: IS 280 2006
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Accessories for fitting panel :-Omega Clamp - 89 mm Dia, 35mm Width, 3mm Thick Flat - 35mm Width, 5mm Thick material MS with hot dip galvanized to 350 GSM.(6 Nos per post)
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Accessories for fitting Truss Support Post:- (a) Brace Band-89 mm 40mm Width, 4mm Thick material MS with hot dip galvanized to 350 GSM.(1 No per Alpha post).
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Accessories for fitting Y Arm :- (a). Mushroom Head Bolt with breakable head safety nut (M8X120) (2No per post): Material : SS 304
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Eye Bolt with Loop nut M8X100, Material SS 304. There will be 6 eye bolts for each straining Y Arm. There are 34 straining Y Arm per KM. So 204 eye bolts are required for per KM.. Material :SS-304. Material Ms Strip as per 1730. IS : 8535 -1987.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Underground post fixing arrangement:- (a) Anchor Rod 10mm Dia 300mm long GI Rod tie with fence post at bottom using tie wire.(2 Nos per post). Holes of suitable dimention will be provided at lower end of fence post to insert the anchor rod into it.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Tie Wire – 1.4mm dia/ 100mm length. Wire : IS 280 2006 MS Material (02 Nos per Anchor rod)
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Flat clamps for panel connection Flat 25x3, 160mm long, 2-slots
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
SS 304 Mushroom head bolt, M8X25 Sheet Metal IS 1730. IS : 8535 -1987. Material :SS 304
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Hog ring, As per drawing. To secure PTC coil to PTC coil and also PTC coil to panels. Wire Dia : 3mm : shape and size as per drawing No NC/LC/A6/V2.2 dt 06 Nov 15.
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Fence Post : Type : Circular Hollow section Dimensions : 76mm Dia, 3 mm (3mm +/- 0.3mm) thickness: All tolerances as per IS specn IS:1239 Length : 2.8mtrs (2.1 mtrs above ground level + 0.7 mtrs under the ground level). Weight : 15.02 Kg (+/-5%) Coating :Hot Dip galvanised to minimum 350 GSM Hot Dip Galavanising as per IS 2629 / IS 4759 /ASTM A 123. Ref Drawing No : NC/LC/A1/V2.2. Fence Post- IS: 1239. Coating - as per IS 2629 / IS 4759 /ASTM A 123 Material: MS Steel Tube
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Across Fence Post :- Clamp - 76 mm Dia, 35mm Width, 3mm Thick material MS with hot dip galvanized to 350 GSM(2 Set per post).
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Musshroom Head bolt with breakable head nut M8X50 (4 per post) : material :SS Ref Drawing No :NC/LC/A6/V2.2. Material: MS strip as per IS 1730. IS : 8535 -1987. Material :SS 304
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
PTCC Rod 10 mm dia 2.64 mm long MS Rod. Suitable arrangement be made on fence postfor holding of PTCC rod. Material MS with hot dip galvanized to 350 GSM
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
PTCC Rod 12 mm dia 2.64 mm long MS Rod. Suitable arrangement be made on fence postfor holding of PTCC rod. Material MS with hot dip galvanized to 350 GSM
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Post Cap. Ref Drawing No :NC/LC/A10/V2.2 IS: 1239. Material: MS
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Brace Band-76 mm 41mm Width, 4mm Thick material MS with hot dip galvanized to 350 GSM(1 No per Bravo post)
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
Rail end Cap. Ref Drawing No :NC/LC/A10/V2.2 IS: 1239. Material: MS
Uri/Mohura
Naugam
Boniyar/Rampur
Ziran/Gulmarg
RCC Hume pipe single collar HP 04 Class conforming to IS 1458 - 1971 of 300 mm dia, 2.45 mtr long.
Uri/Mohura
Naugam
Boniyar/Rampur
RCC Hume pipe single collar HP 04 Class conforming to IS 1458 - 1971 of 600 mm dia, 2.45 mtr long.
Uri/Mohura
Naugam
Boniyar/Rampur
Supply of Class 1 double twisted, Zinc coated MS Gabion boxes of size 3m x 1m x 1m having following specifications:- (a) Mesh size- 80 x 100 mm (b) Number of diaphragms - 02 Nos (c) Mesh wire dia - 3.00 mm (d) Edge/Selvedge dia - 3.90 (e) Lacing wire dia - 2.20 mm (f) Minimum qty of lacing wire - 3% of total weight of gabion basket supplied.
Uri/Mohura
Naugam
Boniyar/Rampur
Road sign bd of size 3' x 2' with MS sheet incl 8' long MS Angle Iron 2 x posts of 45 x 45 x 6mm incl necessary welding and finishing the steel surface with two coat of synthetic enameled paint over a coat of red oxide.
Uri/Mohura
Naugam
Boniyar/Rampur
Road indication bd of size 450 x450x 450mm Triangle with MS sheet incl 8' long MS Angle Iron 2 x posts 45 x 45 x 6mm incl necessary welding and finishing the steel surface with two coat of synthetic enameled paint over a coat of red oxide.
Uri/Mohura
Naugam
Boniyar/Rampur
Punched Tape Concertina Coil : 850mm Dia/18 loops/3.5mm core wire. Coil Diameter : 850mm (+/- 50mm). Blade Profile: Tear Blade Profile. Core Wire : High Tensile, 3.5mm (+/-0.1mm) Dia. Zinc coating : Galvanised to min : 275 GSM. Tensile Strength of Wire : 1400-1500 N/sq mm. Number of loops : 18. Stretchable length : 2.5 mtrs. Locking Clips : 5 clips per set of loops. Weight : 6.7 Kgs(+/-5%). Ref Drawing No :NC/LC/A2/V2.2. Specification for Steel Strip : IS 1730. Specification for wire : IS 280 2006. Specification for coating : Min 275 GSM coating as per IS 6745/1972 reaffirmed 2006. Punched Tape Concertina Coil shall confirm to CQA, EE, Pune specification No : CQAE/5660/1602/A and controllerate of quality assurance of Engg Eqpt Pune Drawing No IMGA-0112/B (Sheet 1 to 2), IMGA-0122/C (Sheet 2 to 2), IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B
Naugam
Boniyar/Rampur
Gulmarg/Ziran
GURUKRUPA WIRE NETTING INDUSTRIES
UNIVERSAL FABRICATORS
M/S J K ENGINEERING WORKS
M/S TARIQ ENGINEERING WORKS
S.G.ENGINEERS
M/s Hi Tech Builders and Manufacturers
M/S LONE BUILDERS AND SUPPLIERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .