REPAIR / REPLACEMENT TO SANITARY FITTING, FLOORING, ROOF SHEETING, PAINTING OF BLDGS, PLUMBING WORKS AND OTHER ASSOCIATED WORK IN FD STN AULI

Amount

Contract Details

M&L for dismantling of plain or corrugated steel sheeting any guage, thickness, including Nainital or similar pattern roof covering complete all as spd and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof / ridge/ covering/cladding to wall, fixed with self tapping screws as specified and directed by engg - in- charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (except sheet) 0.50mm of an colour having tensile strength of 550Mpa as in roof/ ridge/ covering/cladding to wall, fixed with self tapping screws as specified and directed by engg - in- charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises.

M&L joint free non-skid coloured ceramic tiles 7 to 8 mm thick square /rectangular) area of each tile exceeding exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match as specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.

M&L joint free vitrified ceramic tiles light shade 10 mm thick square /rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick for laying floor finish and on surface of wallls behind tiles in CM (1:6) as specifed and directed.

M&L for backing coat 10mm thick for laying skirting/dados and on surface of wallls behind tiles in CM (1:4) as specifed and directed.

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M&L applying 15 mm thick rendering in CM 1:6 on brick/ concrete surfaces of int. walls finished even and fair complete all as specified.

M&L preparing of new plastered surface of walls and applying three coat of white wash complete all as specified and directed by by engg - in- charge.

M&L preparing of old plastered surface of int. walls and applying one coat of distemper oil emlusion complete all as specified and directed by by engg - in- charge.

M&L for preparation of old painted steel or iron surface inc steel gates, grills, trusses at any height, channels, griders,north light curves framing, welded mesh etc over 10cm in width or grith and applying one coat of synthetic enamel paint paint all as specifed and directed by engg in charge.

M&L for preparartion of old wodden surface of any description over 10cm width grith and applying one coats of Synthetic enamel paint as directed by engg-in-charge

S&F in repair plywood of thickness 6mm as in celling or at any location as directed by E-in-C, grade BWR type BB fixed with screw to frame work complete all as specified and directed.

M&L for preparartion of new wodden surface of any description over 10cm width grith and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and directed by engg-in-charge

Taking down chowkhat or frame without taking down shutter from the frame area n exc 1.50 sqm complete all as specfied and directed

M&L for aluminium frame for doors, windows, ventilators, aluminium flats & aluminium grill inc all fitting assecory required as per site condition, with one or more rebates includng joining cleats for fixing etc . Complete all as specifed and directed by engg-in -charge.

M&L for powder coated aluminium door shutter, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specifed and directed by engg-in-charge.

S&F in repair PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inc solvent cement and fixing at site on PVC frame all as spd and directed

S&F in repairs CP angle valve 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repair for chromium plated shower rose with arms complete all as specified and directed.

“S&F in repair rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position incl dismantling of existing tank of any description all as specified in SSR Part-I, 500 ltr capacity triple layer, including suitable brass float valve complete all as specified and directed.”

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Supply and fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type white as approved, ball valve float valve and handle incl bracket complete.

S&F in repairs CP bib tap long body 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repair PVC connection fibre reinforced 300mm long with brass check nuts and PVC washers at both ends

S&F in repair of vitreous china squatting pan size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or S trap, lime concrete bedding & making good floor complete all as spd & directed.

S&F in repair brass CP mixer for 15mm bore dia of pipe for mixing cold and hot water screwed down for iron pipe complete all as specified and directed.

S&F in repair kitchen sinks made of stainless steel 1 mm thick with plugs, washers and waste including bedding in cement mortar over all size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm including waste coupling 40mm and waste pipe complete all as specified and directed. Nirali/Paryag ISI Marked.

S&F in repair grating of size 125mm complete all as spd and directed

S&F in reapir CP towel rail 600mm long of fixed with and inc chromium plated screw and wodden/ plastic cleats complete all as spd and directed

S&F as per direction of engg-in-charge Aluminium (Extruded section) Door closer hydraulically regulated, designation No. 1 universal type, suitable for any door shutters width and of weight not more than 35kg

Hacking out old broken glass any size thickness from steel frame including removing MS cleats punching or drilling out old glazing pins/springs etc all as specified.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square nexc 0.50 sqm each pane

S&F 4.8 mm thick sheet glass fixed on aluminium door/frame/windows in square exc 0.50 sqm each pane, all as specified and directed by engg-in-charge

S&F in repair mild steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples.

Taking up or down steel tubing and connection 15 mm bore pipe.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore.

Taking up or down steel tubing and connection 20 mm bore pipe.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore.

S&F in repair Pillar taps 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repair vitreous china wash hand basin, flat back, white size 550 x 400 mm incl bracket, pillartap, PVC waste pipe & waste coupling 32 mm dia all as specified and directed by engg-in- charge.

Dismantling of board for false celling of any description and size complete all as spd and directed

Dismantling of snap grid for false celling of any description and size complete all as spd and directed

S&F anodised aluminium snap grid frame work for false ceiling suspensi system size 600mm x 600mm complete all as specified and directed.

Supplied and fixed non asbesots textured designer ceiling board 4 mm thick of size 595x595mm fixing with screwes/ clips complete all as per manufacturares instructions and as directed

S&F in repair 20 mm Brass spindle suitable for Bib cock, stop cock, pillar tap, angle wall wall/WHB mixer etc half or full turn of any description complete all as specified by Engineer - in - Charge.

S&F in repair pair of brass adjustable legs for wall mixer inc washers and packing as per site requriment complete all a s spd and directed

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white, inc spray Jet and seat cover all as specified and directed.

S&F in repair nipple 20mm bore dia sutiable for HDPE water tank

S&F in repair nipple 15mm bore dia sutiable for HDPE water tank

S&F in repair viteress china wash down water closet pan (padastal pattern) one piece wall mounted type (inc flushing cistern) inc connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc & S&F plastic water closet seat cover closed pattern with flat bottom and MS chromium plated or aluminised hinging device complete all as spd and directed make: Pareware CAT C8967(S-220) or equivalent in jacquar&CERA

S&F in repair counter wash basin of size 470X470X200mm oval bowl with provision for overflow and tap hole and waste pipe , waste coupling 32mm and swan neck pillar tap and any otherthing requried for fitting complete all as spd and directed. Make CERA, Parreyware, jaquar or equivalent

S&F in repair 1st Quality decorated venetian roller blind sutiable for doors/ windows/ glass framing/ ventilators of any design/colour/size as approved by Engineer in Charge and fixed with bracket and other fixing tools as per manufacturer instruction complete all as specified and as directed.

M&L for granite (any colour) 18- 20mm thick machine cut, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. Note: Rate also inc making holes for gas pipe/ counterwashbasin fitting.

S&F in repair solar control film 25 micron reflective type (gareware suncontrol or equivalent) of colour as approved by engg-in-charge complete all as spd and directed.

S&F in repair GI union 15mm bore screwed and fixed at any location as per site requriment and decided by engg-in-charge

S&F in repair GI union 20mm bore screwed and fixed at any location as per site requriment and decided by engg-in-charge

S&F in repair GI elbow 15mm bore screwed and fixed at any location as per site requriment and decided by engg-in-charge

S&F in repair GI elbow 20mm bore screwed and fixed at any location as per site requriment and decided by engg-in-charge

M&L for welding (size n exc 4 cm) in repair of loose joints of trusses, purlins, rafters. Cleats, sliding doors, flat iron supports for velley gutters, windows, doors, northlight framing, railings etc inc at any height & inc necessary cutting and grinding all as specified and directed.

S&F in repairs PVC Bath cabinet with mirror 18" x 22" x 4.25". Make : Cat No MCB 253 of Pearl / equivalent in commander, Prayag

S&F in repair 20 mm bore valve of PTMT high pressure with epoxy coated Al rod and plastic ball screwed for iron pipe and fixed.

Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S BHATT ENTERPRISES