Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.7 LAccepted-AOC RABINDRA NAGAR P O RABINDRA SARANI SILIGURI 734 006 DIST DARJEELING W B | JALPAIGURI | WEST BENGAL | 734006 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹47.1 L+₹2.2 L (4.98%)Rejected-Finance SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹47.4 L+₹2.6 L (5.73%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | Rejected-Technical 29 KESHULI AKOUR MADHUBANI MADHUBANI BIHAR 847230 UDYAM BR 20 0037592 | MADHUBANI | BIHAR | 847230 | - | Rejected-Technical The firm is not enlisted in b (ii) category | |
| 5 | Rejected-Technical DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 | JALPAIGURI | WEST BENGAL | 734004 | - | Rejected-Technical The firm is not enlisted in b (ii) category |
Tender Value
₹43.7 L
EMD Value
₹87,500
Closing Date
25 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjleeling (WB)
REPAIR/ MAINTENANCE OF HT/LT CERTAIN INSTALLATIONS AT SUKNA MIL STATION UNDER GE SUKNA
2023_MES_630909_1
8202/S/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Sukna
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Sukna
₹87,500
HQ CWE Bengdubi
8 Mar 2024
4 Dec 2023
1 Jan 2024
4 Dec 2023
25 Dec 2023
19 Dec 2023
9 Dec 2023
Amount
Dismanting of 11 KV VCB, 400/630 Amps, Indooor VCB panel (Make: SCHNEIDER/Crompton Greeves), servicing, repairing/ replacement (as directed) of the unserviceable items such as closing/ tripping coil assembly, spring charging motor and gear assembly, master trip relays, supervision trip relays, over current relays, overhauling and including rectification of the electrical & mechanical fault by the Service Engineer/Authorised Personnel of the Company after necessary cleaning and providing silicon grease to all the moving parts, also including adjustment of all springs/ relays etc and Preparation of surface of VCB panel board cubical in shape and applying one coat of SFRC paint. (including VCB, its components, entire system) 100% serviceable, complete all as specified and as directed by the Engineer-in-Charge.
Calibration and Testing of 11 KV VCB, 400/630 Amps, Indoor VCB panel (Make: SCHNEIDER/ Crompton Greeves), CT, PT Relays, VCB testing including CRM, Timer, IR Testing in VCB and ratio primary, IR, winding resistance, polarity testing in CT and PT and secondary current injection with 03 setting & tripping test with timing in relays and applying control voltage & testing all scheme logic with on/off trip operation, also checking metering and protection and annunciation with indication kit, making the VCB Panel and Testing of CT ratio, polarityy test and connection of CT100-50/5 +5A by primary injection complete and calibration of IDMT relay over current, earth fault and under voltage 100-50/5 + 5A secondary injection complete all as specified and as directed by the Engineer-in-Charge. Note for item No 1 & 2 above:- Cost of all the materials, labour and other elements to make the entire system serviceable shall be deemed to be included in the quoted rate and only payment for supply only of the items listed here-in-below shall be measured and paid for separately in case these are ordered and provided as directed. The make of the items/ materials shall be as specified in the items (s) and in case not specified, the same shall be of make SCHNEIDER or as per existing suitable to match with the existing VCB system as directed by the Engr-in-Charge.
Supply only three phase digital Ampere Meter of size 96x96mm, accuracy class 0.5 (Model No. WL131020OOOO of L&T or equivalent Model and make as approved by GE) suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only three phase digital Volt Meter of size 96x96mm, accuracy class 0.5 (Model No. WL132020OOOO of L&T or equivalent Model and make as approved by GE), suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Over Current Relay and Earth Fault Relay (Make Schneider,Type Micon P111 or equivalent make and model as approved by GE) suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only master trip relay, operating voltage 24- 220V DC( Model No VAJH13 of make Alstom or equivalent model and make as approved by GE) suitable for 11KV 630A VCB Panel, completeall as specified and as directed by the Engineer-in-Charge.
Supply only trip circuit supervision relay ( Model Wax of make Alstom or equivalent model and make as approved by GE) operating voltage 220-250V AC, suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only 11KV PT epoxy resin cast with fuse draw out type, 11KV/110V, accuracy class 0.5, suitable for 630A VCB Panel, completeall as specified and as directed by the Engineer-in-Charge.
Supply only single phase, PT fuse suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only space heater 230V, AC 100W suitable for 11KV 400/630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only multi voltage type indicator lamp suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only tripping coil, 110V, DC suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only closing coil, 110V, DC suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only spring charging gear motor, 230V, AC suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only TNC switch suitable for 11KV 630A VCB Panel, completeall as specified and as directed by the Engineer-in-Charge.
Supply only vacuum interrupter bottle made up to withstand internal pressure, VGE-4 type suitable for 11KV 630A VCB, rated short circuit breaking current of 26.3 KA rms, rated making current of 2.5 times of rated S/C current, break time and make time should be less than 60ms, closing speed 0.7-0.9 m/sec, complete all as specified and as directed by the Engineer-in-Charge.(Make CG/Schneider or equivalent make as approved by GE)
Supply only digital type, multifunction meter of size 96 x 96mm with parameter displayed should be Voltage, Current, PF, Frequency, CT and PT programmable ( Make Schneider or equivalent make as approved by GE) suitable for 11KV 630A VCB Panel, complete all as specified and as directed by the Engineer-in-Charge.
Supply only 11 KV CTs having CT ratio 100-50/5 +5A and output & accuracy class Core 1:15 VA/ CL1.0 and Core 2:15 VA/ 5P10, STR: 13.1 KA for 1 sec, BIL 28/ 75 KVP Frequency: 50 Hz, conforming to IS: 2705/ 1981, (Make: Existing model of crompton Greaves or equivalent as approved by GE), complete all as specified and as directed by the Engineer-in-Charge.
Supply, installation, testing and commissioning of unarmoured, PVC insulated & sheathed, 1100 Volts grade control cable with FRLS, solid copper conductor, 2.5 sqmm 4 core for VCBs, remote control units including taking down old unsv, complete all as specified and as directed by the Engineer-in-Charge.
Supply, jointing and testing in repairs, cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink type joint, complete with and including jointing materials and accessories suitable for 11KV XLPE insulated armoured aluminium conductor cable of size 95 Sqmm 3 core, complete all as specified and as directed by the Engineer-in-Charge.
Supply, jointing and testing in repairs straight through cable jointing kit (Heat shrinkable type) for 11 KV (Earthed) grade cable complete with and including jointing materials and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm and also including provision of aluminium thimbles, complete all as specified and as directed by the Engineer-in-Charge.
Supply, jointing and testing in repairs cable jointing kit for 11 KV (Earthed) grade cable for indoor termination, heat shrink type joint, complete with and including jointing materials and accessories suitable for 11KV XLPE insulated armoured aluminium conductor cable of size 95 Sqmm 3 core, complete all as specified and as directed by the Engineer-in-Charge.
Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, HT electric power cables (heavy duty) with aluminium conductor 11000 volts grade (Earthed) of size 95 sqmm 3 core and including taking down old unsv, complete all as specified and as directed by the Engineer-in-Charge. Note:- Excavation and earth work, Boring/ Drilling, sand cushioning, protection covers, protection pipes and jointing kits including jointing materials shall be measured and paid separately under relevant items.
M&L for finding fault in the existing route of HT cable with Fault Locator Machine, complete all as specified and as directed by the Engineer-in-Charge. Note : (i)The quoted rates shall also be deemed to include for arranging of the Fault Locator Machine alongwith specilized Technician (and inclusive of its hire charges) by the contractor under his own arrangement. (ii) Test reports to be submited by the contractor duly signed by all concerned.
M&L for carrying out repairs to HT 11 KV GODs/ DO including replacement of brass connections, greasing of all moveable parts with white grease, replacement of connectors wire, nuts, bolts, clamps etc, complete in all respects to make the GOD/DO 100% serviceable, all as specified and as directed by the Engineer-in-Charge. Note : Cost of all the materials, labour and other elements to make the entire system serviceable shall be deemed to be included tin the quoted rates and only payment for supply only of the items listed here-in-below shall be measured and paid for separately in case these are ordered and provided as directed.
Supply only female contact or fixed contact, heavy duty and high conductive metal, 400 Amp, 11 KV rated, suitable for 400 Amps capacity, 11 KV rated GO Switch, complete all as specified and as directed by the Engineer-in-Charge.
Supply only male or moving contact heavy duty and high conductive metal, 400 Amp, 11 KV rated, suitable for 400 Amps capacity, 11 KV rated GO Switch, complete all as specified and as directed by the Engineer-in-Charge.
Supply only Tinned copper flexible jumper of capacity 400 Amp for 11KV rated GOD, complete all as specified and as directed by the Engineer-in-Charge.
M&L in replacement Switch Air Break, Gang operated, Triple Pole, Mechanically Operated, mounted on insulators and Steel Frame Single Break Insulators suitable ofor Out door Vertical Mounted complete with Manual Operating Mechanism made and operation from GL including 25mm bore GI pipe heavy duty and handle Arching Horns and Terminal Connectors for ACSR Conductors conforming to IS-1818/72 and 9921/85 with 3 Isolator Per Pole of Capacity 400 Amp, 11 KV Operation including necessary Adjustment and making Holes on Mild Steel Angle and Testing complete all as specified and as directed by the Engineer-in-Charge. Note: Cost of necessary jumper connections is deemed to be included in the unit quoted rate.
Supply & Installation in repair of Advance conductive compound based chemical compound technology with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper Coating 250 microns. Earthing system confirming to IS:3034. The ROD should be 17.2 mm & 3 meter long with rod tape clamp, CR 125 (type A) additional protection of the terminal. Checimal compound should be highly Conductive Compound as per BSEN 50164-7 with 25Kg each bag and resistivity should be 0.05 ohm meter.The job includes digging the pit and refilling the same by Back Fill Compound (Ground Enchancer), the BFC should be eco friendly it should not contain environmentlly hazardous material/ metal having mixed with 3:1 cement, a conductive concrete is formed. The earth pit should be provided with a light weight inspection pit cover for protection and safe guard of terminals. In areas where soil condition is bad, good earth is to be arranged to fill the excavated pits by mixing a conenient and permanent solution by adding with 3:1 ratio chemical compound with the earth electrode is the main component of the earthing system which is in direct contract with the ground and thus provides a means of releasing or collecting earth leaking currents. The material should have good electrical conductivity and anti corrosion property in wide range of soil conditions. Make : ABB Furse CEM as per RB 336 or Techno commercially equivalent make as approved by GE. Each earth pit should contain:- 1) 1 No. copper bonded high tensile low carbon steel, 17.2 mm dia, 3 meter length. 2) Rod to tape clamp (type A). 3) 25 kg chemical compound as per BSEN 50164-7(BFC). 4) Light weight inspection pit cover with 5000 kg weight load capacity.
Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, LT electric power cables (heavy duty) with aluminium conductor 1100 volts grade (Earthed) of size 10 sqmm 4 core, including taking down old unsv, complete all as specified and as directed by the Engineer-in-Charge. Notes:- Excavation and earth work, sand cushioning, protection covers, protection pipes and jointing kits including jointing materials shall be measured and paid separately under relevant items.
All as per item No 31.00 here-in-before but LT Cable of size 25 Sqmm x 4 Core.
All as per item No 31.00 here-in-before but LT Cable of size 50 Sqmm x 3.5 Core.
All as per item No 31.00 here-in-before but LT Cable of size 95 Sqmm x 3.5 Core.
Excavation in trenches in soft/ loose soil not exceeding 1.5 metre wide and not exceeding 1.5m in depth for laying of LT under ground cables/ pipes and not exceeding 10 Sqm on plan & 1.5 metre in depth for pole etc, complete all as specified and as directed by the Engineer-in-Charge.
Returning, filling in, with approved earth (retrieved from excavation after removal of grass, vegetation etc) including spreading, watering and well ramming in layers not exc 25cm thick in layers, complete all as specified and as directed by the Engineer-in-Charge.
Removal of surplus spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed by the Engineer-in-Charge.
M& L for Sand cushioning in trenches/ existing cable trenches for cushioning of underground cable including spreading, levelling, well ramming in layers not exceeding 25cm in thickness, completeall as specified and as directed by the Engineer-in-Charge. Note: Punned thickness of 18cm shall only be measured and paid.
Material and labour for well burnt Sub-class 'B' old size bricks, best quality locally available laid flat, dry in trenches for cable protection, complete all as specified and as directed by the Engineer-in-Charge.
Relaying of pre cast reinforced concrete cable cover in trenches (retrieved from item No 23 here-in-before), complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing GI tubing, light grade, 80mm bore for protection of cable, under road crossing, across drain, along electric pole or floor /wall etc, complete including taking out existing pipe, complete all as specified and as directed by the Engineer-in-Charge. Note : Excavation & Earth work and/ or Boring/Drilling shall be measured & paid for separately.
Boring/Drilling (horizontally) manually approx. upto 2 metre depth in soil below existing road suitable for passing GI tubing of 40 to 80 mm bore, complete all as specified and as directed by the Engineer-in-Charge.
Supply, jointing and testing in repairs straight through cable jointing kit (Heat shrink type) for 1.1 KV (Earthed) grade cable complete with and including jointing materials and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150-185 Sqmm and also including provision of aluminium thimbles, complete all as specified and as directed by the Engineer-in-Charge.
Supply, jointing and testing in repairs straight through cable jointing kit (Heat shrink type) for 1.1 KV (Earthed) grade cable complete with and including jointing materials and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-120 Sqmm and also including provision of aluminium thimbles, complete all as specified and as directed by the Engineer-in-Charge.
Supply, jointing and testing in repairs straight through cable jointing kit (Heat shrink type) for 1.1 KV (Earthed) grade cable complete with and including jointing materials and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 35-50 Sqmm and also including provision of aluminium thimbles, complete all as specified and as directed by the Engineer-in-Charge.
M&L for carrying out repairs of existing old LT panels/ bus bar chamber/ feeder piller box of size not less than 1000 mm (Height ) X 1000 mm (Breadth) X 500 mm (Depth) by excavation of all loops, removing damaged UG cable portion connected to the panel, making connection with provision of new thimbles/ lugs/ cable glands, replacing existing one with provision of new neoprene rubber gasket to make it completely dust and vermin proof, provision of new locking arragement, rewiring with appropriate size of new copper conductor wire, repairing of rusted parts of frame & supporting channel with necessary welding works including preparation and applying one coat of synthetic enamel paint on the entire internal steel surfaces and one coat of aluminium spray paint on out side entire steel surfaces, complete all as specified and directed. Note:The unit rate quoted shall also be deemed to be include the cost of earth work, PCC foundation (1:3:6) type C-2, new thimbles/ lugs/ cable glands, neoprene rubber gaskets, bus bars, wirings, welding works, painting, sand fillings in loops etc. as required.
All as per Item No 46 above but size 1200 mm (Height ) X 1200 mm (Breadth) X 500 mm (Depth) to 1800 mm (Height ) X 1800 mm (Breadth) X 600 mm (Depth) .
Material and labour for preparation of old rusted steel exposed surfaces of 2 pole structure of 9/11m length, cross arms, brackets etc mounted on poles, applying one coat of synthetic enamel paint upto 0.8 metre height as per the existing pattern above the P.C.C coping & one coat of aluminium paint beyond 0.8 metre height (for the remaining exposed surfaces) of the poles as well as on the exposed surfaces of cross arms, brackets etc mounted on the poles, re-writing pole numbers and cutting vegetation growth all around the poles upto 1 metre radius, including replacement of self adhesive fluorescent colour tape as per existing pattern and size, complete all as specified and as directed by the Engineer-in-Charge..
Material and labour for preparation of old rusted steel exposed surfaces of 4 pole of 9/11m length, cross arms, brackets etc mounted on poles, applying one coat of synthetic enamel paint upto 0.8 metre height as per the existing pattern above the P.C.C coping & one coat of aluminium paint beyond 0.8 metre height (for the remaining exposed surfaces) of the poles as well as on the exposed surfaces of cross arms, brackets etc mounted on the poles, re-writing pole numbers and cutting vegetation growth all around the poles upto 1 metre radius, including replacement of self adhesive fluorescent colour tape as per existing pattern and size, complete all as specified and as directed by the Engineer-in-Charge.
Supply, installation, testing and commissioning manual changeover switch I-O-II type operation 400 Amp rating 415 volt, with extended shaft and IP65 piston type handle suitable for fixing inside existing LT panel (open excution type) with and including taking down old unsv one completeall as specified and as directed by the Engineer-in-Charge. Make: Cat No. OT400E04CP of make ABB or equivalent model of make Siemens/L&T/Scheinder as approved by GE.
Supply, installation, testing and commissioning of Tap off box 400 Amp capacity,4 pole, 415 V AC suitable for existing busbar bar trunking system including fixing arrangement and including taking down old unsv one, complete all as specified and as directed.
Supply, installation, testing and commissioning of Tap off box 250 Amp capacity,4 pole , 415 V AC suitable for existing busbar bar trunking system including fixing arrangement and including taking down old unsv one, complete all as specified and as directed by the Engineer-in-Charge.
Supply, installation, testing and commissioning of busbar chamber 200A, 4 way complete with enclosure, busbars, accessories and connection with LT cables including taking down old unsv one, complete all as specified and as directed by the Engineer-in-Charge. Make; HAVELLS, Cat No. IHBC020004 or euivalent make . of L&T/Legrand as approved by GE.
Supply, installation, testing and commissioning of busbar chamber 400A, 4 way complete with enclosure, busbars, accessories and connection with LT cables including taking down old unsv one, complete all as specified and as directed by the Engineer-in-Charge. Make; HAVELLS, Cat No. IHBC040004 or euivalent make . of L&T/Legrand as approved by GE.
S&F in repair Hot Dipped Galvanised Wiremesh cable Tray with between 60 and 80 microns of zinc coating as per BS 729 in accordance with standard EN ISO14 61, with all mounting accessories to fix at a height of 3 ft above GL . Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. Steel Wire Cable Tray should be produced from lateral and longitudinal sidewall steel wires, with minimum diameters between 3.9 mm to 5.9 mm for trays depending on the widths of the trays as per the design parameters. Trays should be manufactured with a longitudinal ‘T-welded’ safety edge along the top wire of the sidewall. Trays should be constructed with a 50mm x 100mm mesh configuration. Trays should be coupled together using fast spring coupler. The coupling will have the same surface finish as the tray. Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard IEC 61537 (10-2006). Fire test certification should be published in accordance with the E90 standard. Electrical continuity across a coupling should be demonstrated by means of a published test method and result. Wiremesh/mesh type/ basket type cable trays, supported at every 1.5 mtrs span should have minimum (149 Kg/mtr) uniform weight bearing capacity per meter, with depth of tray 105 mm and width 500 mm complete in compliance with IEC 61537 (10-2006), complete all as specified and as directed by the Engineer-in-Charge.
Supply, fixing and testing, XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured, LT electric power cables (heavy duty) with copper conductor 1100 volts grade (Earthed) of size 185 sqmm Single core including copper lugs suitable size, (Cable shall be fixed from panel to tap box for connection) and including taking down old unsv, completeall as specified and as directed by the Engineer-in-Charge.
All as per item No 56.00 here-in-before but LT Cable of size 120 Sqmm x Single Core.
Supply, installation, testing and commissioning of MCCB, 4 Pole, 400 Amps, 36 KA, Ics=100%,adustable short circuit and overload protection, spreader link and including taking down of old unsv one, complete all as specified and as directed by the Engineer-in-Charge.
Supply, installation, testing and commissioning of MCCB, 4 Pole, 250 Amps, 25 KA, Ics=100%,adustable short circuit and overload protection, spreader link and including taking down of old unsv one, complete all as specified and as directed by the Engineer-in-Charge.
M&L earthing complete with copper earth plate electrode of size 600 x 600 x3.15 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to copper earth strip of size 20x3 mm by means of bolts, nuts, check nuts and washers of copper, complete all as shown in Electrical Plate No. 3 of SSR Part-1 and connected to earthing test point and including dismantling of old one, complete all as specified and directed. Note: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C-1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI medium grade earth lead rotection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
M&L for earth continuity conductor or main earthing lead of size 20X3.0 mm copper strip fixed and joint with existing earthing and / or for any other situation in loop earthing etc including dismantling of existing one, complete all as specified and as directed by the Engineer-in-Charge.
M&L for earth continuity conductor or main earthing lead of size 32X6 mm galvanized iron strip fixed and joint with existing earthing and / or for any other situation in loop earthing etc including dismantling of existing one, complete all as specified and as directed by the Engineer-in-Charge.
R N SAH N CO
M/s B. K. Ghosh and Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .