RRD of LWSS Shillai in Tehsil Shillai Distt. Sirmour (HP) (UNDER PDNA)

Amount

Excavation in foundation and trenches in all type of soil such as pickwork jumper work Kankar, moorum, shingles including decomposed soft and hard rock etcupto all heights stacking the excavated earth not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts as per the direction of Engineer in-charge.

Providing and laying cement concrete 1:4:8(1cement:4approved sand:8app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Providing and laying cement concrete 1:1.5:3(1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation and plinth including entire carriage of material upto all leads and lifts.

Wall (any thickness but not less than 0.1m thickness) attached pillasters,buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage ofmaterial upto all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring,shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:-

Flat surfaces such as soffits of suspended floors, roofs, landings and the like, floors etc., up to 200mm in thickness.

Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge .including entire carriage of material upto all leads and lifts.

Providing and laying reinforced cement concrete work 1:2:4 ( 1 cement :2 sand :4 graded stone aggregate 20 mm nominal size ) excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies beams, girders bressumers and cantilevers upto floor two level in all heights and depths includiing all leads lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing tor steel reinforcement for RCC work including bending,binding and placing in position complete upto floor two level.as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Wire crates made of G.I. Wire filled with boulders with square cut faces against the wire (boulder filling to be measured and paid for separately) G.I. Wire 5mm thick corresponding to SWG-6 15cmx15cm mesh.as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts.

Wire crates of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for separately) including entire carriage of material upto all leads and lifts dry hand packed tightly in wire crate vertical bund with opening faces (wire crate to be measured and paid for separately) including entire carriage of material upto all leads and lifts.

Providing and fixing MS sheet manhole cover of600 X 600mm to existing storage tank made of angle iron 40mm x 4mm base plate and manhole frame 35mm X 35mm X 4mm with MS sheet 2mm thick including cutting, welding, red lead paint and locking arrangement with lock complete including all leads, lifts and carriage of material at site and as per the direction of Engineer Incharge.

Providing and fixing M.S foot rest of 22mm dia size including embedded in C.C in block 225mm x225mmx75mm including all leads and carriage of material at site as direction of engineer in charge

Providing and fixing cast iron rung 200 mm wide with chequarred/ ribbed non slip surface i/c fixing 200x100x100 mm cement conc. 1:3:6(i cement: 3 Sand : 6 Aggregate 40mm nominal size including all leads, lifts and carriage of material at site and as per the direction of Engineer Incharge.

Laying and jointing in trenches galvanised mild steel steel tubes(light grade ) tube fittings( earth work in trenches to be measured and paid for separately) for scoure and over flow pipe with all leads and lifts.

50 mm dia (L)

65 mm dia (L)

Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock including dressing of sides and beds , disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance as per the direction of Engineer in-charge.

Dismantling of G.I. pipe of 125 mm dia (Medium grade) ( earth work in trenches to be measured and paid for separately) as per direction of Engineer-in-charge .

Reaying, jointing, testing & commissioning at site in trenches following plain ended GMS pipes of 125 mm dia. (Medium Grade conforming to BIS 1239-(Part-1)-1990 or latest with up to date ammendments, capable of withstanding required test pressure as prescribed in BIS code, in randum lengths of 5.5 to 6.5 mtr. The pipe's ends shall be bevelled suitable for butt weld, including the cost of jointing with butt welding confirming to IS 816-1969 or latest as applicable (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail pieces, tees, bends manufactured from parent pipes etc. and cutting of pipes wherever required as per site requirement i/c carriage in all leads & lifts as directed by Engineer-Incharge (Earth work shall be measured & paid for seperately).

Providing and fixing MS Ladder for hoisting arrangement and angle iron plateform for WTP with steel work welded in built up section complete including all leads, lifts and carriage of material at site and as per the direction of Engineer Incharge.

bhajan singh (BID ID -569150)

BHAW SINGH KAPOOR CONTRACTOR (BID ID -569910)

rattan singh (BID ID -569811)

CHATTER SINGH (BID ID -569945)

Raghubir Singh (BID ID -569573)

geeta ram (BID ID -569876)