Tender for Underground Cable Fault Tracing & attending the same by Supply and Fixing of Cable End Termination and Straight Through joint kit for various sites within jurisdiction of VAPI GIDC Sub Division under Vapi Industrial Division.

Item Code Unit Rate

Labour charge for excavation of

cable trench of 400mm width x

1200mm depth, in any type of soil

for laying of cable of size up to

mm2 (For additional cable 200 mm

additional width shall be

considered i.e. half trench length is

to be considered

Labour charge for excavation of

cable trench of 600mm width x

1200mm depth, in any type of soil

for laying of cable of size up to

mm2 (For additional cable 200 mm

additional width shall be

considered i.e. half trench length is

to be considered

Labour charge for excavation of

cable trench of 400mm width x

1500mm depth, in any type of soil

for laying of cable of size up to

mm2 (For additional cable 200 mm

additional width shall be

considered i.e. half trench leng th is

to be considered

Labour charge for laying of 11kV /

22 kV XLPE Cable of size up to

mm2 & preparation of sand layer

100mm thick, in the cable trench &

covering the cable with 150 mm dia

(Outer), thickness 25 mm,

meter long RCC half round muffs

and providing and fixing of 4inch

width yellow colour polyethylene

4 9925000004 tape with printing"CAUTION Meter

ELECTRIC CABLE BELOW' at 0.75 m

depth from ground surface after

laying cable in trench. This will

provide indication that electric

cable is passing underground so as

to protect cable from mechanical

injuries, refilling the same, as per

Instruction of E gineer in Charge

Labour charge for erecting of 11kV

/ 22 kV XLPE cable of size up to

mm 2 on DP Structure with fixing of

5 9925000014 02 Nos polymer cleats on top and Meter

middle part. Polymer cleats, nut

bolts etc. fixing material to be

provided by contractor.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2436/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0649/07/2026 Approved Date: 29-07-2026 05:45

Providing & fixing of 6.11kg/cm2

class4,Green color, 110mm O.D.

8.5mm thickness H.D.P.E. pipe

confirms to IS 4984 and BIS

certification on the erected DP

structure for the mechanical

protection of cable by inserting the

cable inside HDPE pipe. The HDPE

6 9925000015 pipe shall be erected in such a way perJob

that 300mm shall be below the

ground level and the rest 2700 mm

shall be supported on the DP

Structure with 01 No Polymer cleat.

All materials including polymer

cleat and Nut bolt to be provided

Supply & fixing of heat shrink type

end terminations (outdoor) for up

7 9925000017 to 11kV 3C x 185 mm2 size XLPE No

cable as per DGVCL technical s

Supply & fixing of heat shrinkable

type end terminations (indoor) for

8 9925000019 up to 11kV 3C x 185 mm 2 size No

XLPE cable as per DGVCL technical

Supply & fixing of heat shrinkable

straight through joint for up to

9 9925000021 11kV 3C x 185 mm 2 size XLPE No

cables as per DGVCL technical

Labour charge for excavation of

2100mm long x 1200mm wide x

1200 mm deep joint pits for

installation of 11kV / 22kV Straight

through joints as per instruction of

engineer-in-charge & covering the

cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long

RCC half round muffs & refilling

same as per instruction of EIC .

Testing of cable at various points

and commissioning the feeder as

9925000025 per instruction of engineer-in- No

11 charge.Test result shall be

submitted by contractor with bill.

Supply & fixing of heat shrink type

end terminations (outdoor) for

12 9925000030 11kV 3C x 240 mm2 size XLPE Nos

cable as per DGVCL technical

Supply & fixing of heat shrink type

end terminations (indoor) for 11kV

3C x 240 mm2 size XLPE cable as

per DGVCL technical specification

Supply & fixing of heat shrinkable

straight through joint for 11kV 3C x

240 mm2 size XLPE cables as per

DGVCL technical s ecification.

1 DGVCL will provide key material like MS materials, ABC/Bare conductors, PSC/RSJ

poles, Insulators, Fabricated materials etc. to the contractor.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2436/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0649/07/2026 Approved Date: 29-07-2026 05:45

2 All fabricated items shall be fabricated as per DGVCL approved drawing and by

welding rods confirming to the relevant ISI specification and as directed by Engineer

3 Necessary electricity connection for fabrication items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid

4 All the rates are inclusive of PF and Exclusive of GST applicable time to time

5 Work to be carried out after issued of Sub work order by S/dn. Office not prior to that.

6 All steel material are to be painted as below :

(A) Scrubbing of rusted surface properly before applying the paints on to the RSJ

poles & steel fabricated materials of RSJ/PSC poles is must require.

(B) Two coats of approved ISI mark red oxide (primer) is to be properly painted for

the RSJ poles & Steel fabricated materials of RSJ/PSC poles.

(C) Two coats of approved ISI mark Silver paint (i.e. triple mangoes or equivalent

quality silver paint) is to be properly painted on to the RSJ poles & Steel fabricated

materials of RSJ/PSC poles.

7 Submission of Bill for Supply/Purchase of KIT Cable Usage, with bifurcation of Supply

amount along with Labor.

8 Any material (XLPE / Aerial Bunch Cable, Joint Kit etc.) provided by contractor is

approved by DGVCL make, specification and submission of Invoice with purchase bill.

9 The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor and to

provide service connections on ABC by insulated pierce connectors through service

connection box.

10 The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

11 Labor Welfare Cess @1% shell be Deduction in Bill Amt.

EXECUTIVE ENGINEER (O&M);

DGVCL; VAPI IND DIV.

File No: DGVCLDVPI/TEN/e-file/4448/2026/2436/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI