Refurbishment of Additional Office Accommodation for WOT in Training Department

Providing and fixing premium quality vitrified tiles of size 600X600X10mm in floors with water absorption less than 0.08% and conforming to IS : 15622, of approved make SOMANI / KAJARIA in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., includes the cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chipping of existing flooring and disposal of debris to out side the yard)

Providing and fixing of false ceiling with 6 mm thick cement bonded particle board of Bison / V board or equivalent approved make boards in 600 x 600 mm grid using aluminium powder coated T-section or etc., of size 30x35x1.20 mm suspended with 8 swg wire at 1200 mm spacing including applying one coat primer, putty and two coats of emulsion paint ( Rate includes removal of existing wooden ceiling and disposal any where in yard as directed by engineer incharge)

Applying two coats of putty of approved brands Birla / JK to external walls surfaces up to 3 floors height including applying suitable primer on old wall surface after thourough mechanical scrapping and preparation. Putty shall be finished till a smooth and even surface is achieved complete all as directed by the engineer incharge.

Apply two coats of premium quality arcylic Interior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., complete

Providing and fixing aluminium powder coated (single or double shutter), doors and partitions etc., part pannelled and part glazed with pre-laminated flat pressed 12mm thick particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness for windows & ventilators and 3mm wall thickness for doors & partitions as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be clear float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays, floor springs, hydralic door closers etc) lokcing arrangement for windows, Godrej make mortice lock with 3 no keys for each door, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Providing two(2) coats of synthetic enamel paint for window grills etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying putty and prime coat complete all as directed

Providing LED ceiling lights of size 600mmx 600mm, of approved make including fixing etc., complete all as directed.

Providing and fixing Electrcal sockets of 3 Modular, 3 sockets and 3 switches etc., complete all as directed

Providing 16Amps socket cum switch complete all as directed

Providing 2.5 Sq.mm wire of approved make like Anchor, polycab, finolex etc., for entire room complete all as directed.

Supply and fixing of wall mounted fans complete all as directed

Fitment of 2.0Tonne AC's complete all as directed

SHASI ENTERPRISES

YASASWANI CONSTRUCTIONS

RENUKA ENGINEERING WORKS