UPGRADATION OF KITCHEN IN BLDG NO P-30 (A OR MESS) AND PROVN OF PARKING TILES UNDER AGE B/R-I AND AGE B/R-II AT MIL STN YOL

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed.

M&L for Hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L 75mm PCC, M-10 (Nominal Mix) type C-2 (using 40mm graded crushed stone aggregates) as in sub base flooring finished even and fair without using extra cement, complete all as specified and directed .

25mm thick PCC (1:2:4) type B1 using 20mm graded crusshed stone aggregate as in floor finished even and rought to received the topping layer complete all as specified.

Parking tiles 10mm to 12mm thick ,glossy/mat finish, double charged heavy duty (Square or rectangular) of area of each tile exc. 0.42 Sqm but not exc. 1.00 Sqm of approved design, shape and shade set and jointed in neat cement slurry laid over and including 15mm thick screed bedding layer in cement mortar 1:6 , including necessary cutting and waste as per site requirement, complete all as specified and directed by Engr-In-Charge. Note:- The size, shade and design will be approved by GE. Make : ENDURA , JHONSON or as approved by the GE.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge

Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase, complete all as specified and directed. Note:- Kota stone shall be laid as a single piece in riser, steps, tread or in floors complete all as specified and directed by Engineer by Charge.

Dismantling floor,hearth or wall tiling incl cement morter bedding ( but not backing), removing seviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer by Charge.

Glazed coloured tiles of size 450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary cutting, complete all as specified and directed.

Machine cut kota stone slab 18mm to 20mm thick as in riser of steps, skirting, dado and pillar, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick rendering in cement mortar 1:4, cutting, rubbing, grinding and polishing to achieve mirror finish complete all as specified and directed.