Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-2₹75,329Accepted-AOC A CLASS GOVT ELECTRICAL CONTRACTOR VILLAGE CHOWKI PO TRAMAT TEHSIL JOGINDER NAGAR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | ₹75,329 Quoted ₹75,329.47 | L-2 | Accepted-AOC L-1 |
| 2 | L-1₹59,139.55Rejected-Finance HIMACHAL PRADESH HP | LAHUL AND SPITI | HIMACHAL PRADESH | 175133 | ₹59,139.55 | L-1 | Rejected-Finance Recieved consent not to perform work |
| 3 | L-3₹77,589.58Rejected-Finance | ₹77,589.58 | L-3 | Rejected-Finance L-3 |
Updated dates
Tender Value
₹75,337
Closing Date
7 Mar 2026, 11:30 amClosed
Er. Puran Chand
Sr. Executive Engineer, Electrical Division, HPSEBL, Joginder Nagar
Deposit estimate for shifting of 3 -Phase L.T. Line passing over the house of Sh. Dharam Singh Village Tikkari Mushera in (E) Section Local under ESD, HPSEBL, Chauntra.
2026_HPSEB_128709_1
JED-124/2025-26
Open Tender
Electrical Works
60 days
Joginder Nagar
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Yes
19 Mar 2026
16 Feb 2026
7 Mar 2026
16 Feb 2026
7 Mar 2026
16 Feb 2026
Dismantalling of Conductor (50/55 mm²) for L.T.Line (3 PH LT Line):- Removel of conductor, de-stringing & removal from insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Dismantalling of G.I.Wire (8 SWG):- Removel of GI wire, de-stringing & removal from insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Erection of Steel Tubular Pole L.T.:- Digging of Pit , Drilling of holes in Pole X-Arm , Erection of Pole , Erection of X-Arm , Shackle Insulator,Painting of Pole and Filling of Pit and Ramming Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Erection of L.T.Stay Set.:- Digging of Pit , Fixing of Stay road ,Nozzeling & tightening Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Sagging of Conductor (50 mm²) (3 PH LT Line):- Laying of Conductor , Stringing and Sagging and Binding with Insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Sagging of G.I.Wire (8 SWG):- Laying of G.I.Wire,Stringing and Sagging and Binding with Insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Loading, unloading & transportation charges
Supply Part LT :- Prov.Steel Tubular Poles 8 m Long
Prov.Steel Tubular Poles 9 m Long
Prov.ACSR 6/1/3.35mm2
Providing RCC Pipe (Muff) ISI marked suitable for different size of Steel Poles 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanised M.S Wire of 12 SWG Rings and 6 mm M.S Round in vertical directon conforming to IS 458-1988 or latest version if any including filling of cavity between Pre-cast muff and Pole 9 Mtrs. long with cement conc 1:2: 4 ( 1 cement :2 sand 4 graded stone aggregate of 20 mm nominal size) with its all associate material including all type off carriage with in all type lead and other incidental risk etc. Independent piers Coloumn and Pliiars upto floor to level .
Providing D - Shackle Assembly,D-Iron made of 50X 6mm M.S.Flat suitable for 3" X 3.5" Shackle insulator having three holes, One in each side suitable for use with 16 mm bolt.D-Iron to be painted with superior quality Black Japan paint.The size of D-Iron will be 125X75mm .The weight of D-Iron should not be less than 750 grams,Shackle insulator size of 3" X3.50" and Nut & bolt size of 12 mm X 125 mm, to fix the shackle insulator on D-iron. and Shackle Insulator (16 KN) Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Providing Earth Knob conforming to the latest version of IS:9511-1980.) including all types of lead lift and other incidental Etc.
Providing L.T. Stay set made of M.S. round 1600 mm in length and 16 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 16 mm dia, vertical height 300 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.with Stay hook Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc.
Providing Stay 7/3.15 SWG wire of superior Quality as staisfication of Engineer-in-Charge i/c all type of lead,lifts and other incidentals for stay set as required
Providing G.I.Wire 8 SWG of superior Quality as staisfication of Engineer-in-Charge i/c all type of lead,lifts and other incidentals for continuous earth and guarding as required
Providing Nuts & Bolts of various Sizes(Galvanised/Coated) Preferably 16 mm dia or more (With flat and Spring Washer)
Providing alluminium Paint of superior quality including all type of carrige with in all type of lead, lift and other incidentals situation complete in all respect for painting of Steel Tubular Pole 8 Mtrs Long
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_190231.xls
BOQ • 0.30 MB
VolI.pdf
Tender Documents • 0.95 MB
VolII.pdf
Tender Documents • 0.51 MB
Download all tender documents and submit your bid