Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.3 L+₹1.8 L (10.2%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-Finance L2 |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
2 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Aman Bhardwaj
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No.1 Jamnagar 361 003
PROVN OF CERTAIN WORK SERVICES AT AF STATION JAMNAGAR
2022_MES_571399_1
8200/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Jamnagar
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No. 1
₹32,000
Yes
28 Feb 2023
27 Dec 2022
3 Feb 2023
27 Dec 2022
2 Feb 2023
10 Jan 2023
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / loose soil.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / disintegrated rock.
M&L Cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregates) in foundations, filling and mass concrete
Cement concrete 1:2:4 Type B1 (using 20mm graded stone aggregates) in foundations, filling and mass concrete
S&F Mild steel Rolled sections (Fe 410 -W (Gde- E- 250) quality- A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
S&F Mild steel Rolled sections (Fe 290 -W (Gde- E- 165) quality- A as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment
S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long, exc 12 but nexc 20mm dia of bolt.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long (11 to 15mm dia of neck)
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
Preparation of new or previously untreated 'Steel or Iron' Surfaces of any description, over 10cm in width or girth,not otherwise described ; Priming with red oxide zinc chrome ; applying two coats of synthetic enamel paint.
Surface dressing n exc 15 cm deep in soft / loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, soft / loose soil.
Removing excavated material (soil) exc. 50 m but n exc. 100 m and depositing where directed
Formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for Rough finished surfaces of concrete
Formwork to sides of pillars, posts, struts, piers, columns and stanchions (Square, rectangular on plan or polygonal for Rough finished surfaces of concrete
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, antilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for Rough finished flat surfaces of concrete
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for Rough finished flat surfaces of concrete
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering
M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete
M&LReinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)in Columns, pillars, piers, posts and struts
M&LReinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)in Beams, cantilevers, bressummers, lintels over 1.5m span
M&LReinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate)inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
S&F CRS Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
CRS Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Butt hinges, 100mm size, medium weight, cold rolled mild steel, and fixed
S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised
Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement all as specified and as directed.
Rendering 5mm thick Cement plaster 1:3 on fair faces of brick work or concrete surfaces , in ceiling, finished even and smooth without using extra cement all as specified and as directed.
M&L for Preparing new surfaces plastered or unplastered and applying three coats of white wash on ceilings.
M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in floors.
S&F Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement plaster 1:4.
S&F Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick back coat in cement plaster 1:4 on fair faces of brick work or concrete surfaces
S&F water Tubes, 15mm bore, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.
S&F water Tubes, 20mm bore, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.
S&F Wash basins, Vitreous China white, flat back, size 630x450mm, including cutting for and pinning in ends of brackets including 32mm dia brass chromium plated waste coupling, PVC waste pipe, complete all as specified and as directed.
S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule.
S&F 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.
S&F 15mm fancy type Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
S&F PVC connections 15mm size with brass nuts of length 450mm
S&F Cast iron floor trap, 100mm dia of outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
M&L Cement Concrete 1:4:8, type D2, bed to drain pipes ,150mm bore pipe including packing under, and haunching against the sides of pipes after they are laid and tested;
M&L 150mm bore, class A Sail-glazed stoneware drain pipes laid in trenches and jointed as specified
M&L Cutting into existing manholes for connecting new drains, 150mm bore pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor.
S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal
S&F 110mm dia PVC (SWR) bends any radius
S&F 110mm dia PVC (SWR) vent cowl
S&F Vitreous China wash down water closet pan (pedestal pattern), white, including fixing bolts, closed pattern with flat bottom, with white seat & cover (ISI marked) with aluminium hinging devise, including alll connections, all as specified and as directed.
S&F 10 Ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & PVC flush pipe, fixed in position and connecting complete all as specified and as directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S&F 32mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm
S&F Brass chromium plated shower rose 125mm size with arms for 15mm inlet complete.
S&F 250 Litres Rotational moulded polyethylene water storage tanks, three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
Preparing wall surfaces plastered or unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with alumimium section of size 82.50mm x 38.00mmx1.5mm thick (Cat No 20036), half portion glazed with 4mm thick frosted glass including rubber beading & glazing clip, half portion louvers of 80mm wide & 4mm thick frosted glass including alumimium louver patti including SS wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position. Note : Section Nos given above are of make Jindal, contractor may use similar setion of other make mention in Appx B
S&F Structural Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
S&F Mild steel Rolled sections (Fe -290 (Gde E- 165) quality- A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
S&F 6mm thick multiwall polycarbonate sheeting on roofing including aluminium fillets at joints and aluminium angles (40x40x1.5mm) at ends, fixed with screws and all fittings and fixtures complete all as directed.
S&F 15mm size stop valve, cast copper alloy, chromium plated, fancy type, screwed both end for iron pipes.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distimper over a coat of alkali resistant primer.
Rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement all as specified and as directed.
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each
S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
Complete removal of existing treatment on wall surfaces plastered or unplastered and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FRLSH cable 1100 volts grade ISI marked drawn and including PVC casing and capping , including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, FRLSH cable as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for fixing switches/ sockets, etc., complete.
All as per item No 75 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLSH, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed FRLSH, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.
S&F Switch piano, flush type single pole, one way 5 Amp
S&F Switch socket combination 5 in 1, multipurpose, 6 and 16 Amp flush type including connection complete.
S&F energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, aluminium extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make:- Havells Cat No LHEXBTP7IN1S022 or OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES
Supply & fixing Sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed
Supply and fixing MCBs single pole and neutral, 'C' Curve type capacity 40 Amps ,10KA & 240 Volts.
Supply and fixing MCBs single pole and neutral, 'C' Curve type capacity 6 to 32 Amps ,10KA & 240 Volts.
S&F pole mounted junction box (street light boxes) single type (door fits to base by means of sliding ) for 3 phase 4 wire lighting system, moulded in FRP including provision of 2 Nos MCB 16 Amps and busbar insulator - 4 Nos with nuts and bolts with fixing arrangement, outdoor type, of dimensions 340x160x123mm (HxWxD) product code GS-JB-3016S, complete all as directed.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil.
M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed. (Note: Work shall be executed as per clause 19.75 of standard schedule of rates part-1 (2009) for measurement purpose thickness of sand after punning down will be considered.)
S&F 40 mm dia steel tubes (light grade) galvanised with fittings, laid in trenches / wall for protection of underground cable when crossing the road complete.
Supply & lay ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, flat size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed.
S&F Exhaust fan, steel body, AC, single phase, 230 volts, of size 300mm sweep, with blades, frame and louvers, complete.
Vijay Construction Co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .