PROVISION OF 1.0 LAKH LTRS UG SUMP AND CONNECTED WORKS AT AIR FORCE STATION BIDAR

Amount

Surface Excavation not exceeding 30 cm and avg 15 cm deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation over areas not exceeding 1.5 mtr deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation over areas exceeding 1.5 mtr deep but not exceeding 3.0 mtr deep and getting out in soft / disintegrated rocks complete all as specified and as directed.

Excavation over areas exceeding 3.0 mtr deep but not exceeding 4.5 mtr deep and getting out in soft / disintegrated rocks complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated any type of material exc. 1.50 km but not exc. 5.0 km and depositing where directed at a level not exceeding 1.50 mtr above the stating point complete all as specified and as directed.

M&L for cement concrete PCC 1:2:4 Type B- 2 mix (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Damp proof treatment with Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq mtr complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter upto ground level complete all as specified and as directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for Mild Steel HCR TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Description all per Ser Item No 13 above but 6 mm to 8 mm dia complete all as specified and as directed.

Description all per Ser Item No 13 above but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L for RCC M - 30 (Design Mix) as in Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M - 30 (Design Mix) as in Walls, retaining walls, basement walls, ballast walls and the like , any thickness including attached pillasters and buttresses including PVC water bar of 225 mm at joints complete all as specified and as directed.

M&L for RCC M - 30 (Design Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC M - 30 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5 mtr clear span complete all as specified and as directed.

M&L for rendering intrenal and external surfaces with 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 with mixing of Liquid Water Proofing Compound (WPC) complete all as specified and as directed.

Supply Only Liquid Water Proofing Compound complete all as specified and as directed.

M&L for Hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface for plinth protection etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 mix (using 20 mm graded stone aggregate) 100 mm thick as in lintels upto 1.5 mtr clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F Stainless steel wire mesh , 0.50 mm nominal dia of wire and average width of aperture 1.20 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for Posts and struts as in fencing posts including cutting tops to shape as directed, rilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on exposed surfaces complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

S&F 100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including fixed with epoxy coated inside and outside complete all as specified and as directed.

S&F 100 mm dia Cast Iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Mr Madhusudhan Kotarki

M/s S.L.Chablani

Siddique constructions