WBPWD/EE/N24PRG/ELEC/21/19-20

Amount

S&F 415 V, 6way double door Vertical TPN MCB Distribution board for MCB Isolator incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incomer: 1no 100 A 4Pole isolator Outgoing: 4 nos 63 A TP MCB & 6 nos 32A SPMCB ( make-L&T/Legrand)

S&F 415 V, 6way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment: Incomer: 1no 63 A 4Pole Isolator Outgoing: 18nos 10-16A SPMCB ( make-L&T/Legrand)

S&F 415 V, (2+10) way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.: Incomer: 32A DP Isolator Outgoing: 10nos 6-16A SPMCB ( make-L&T/Legrand)

Supply & Delivery of 1.1KV grade XLPE/PVC insulated Al/Ar. Cable of following size (make- KEI/RR/Glostar/Havells) a) 4 core 35 sqmm (Panel to VTPN)

b) 4 core 25 sqmm VTPN to PBDB)

c) 2core 6 sqmm (for Outdoor Light)

Laying of following cables on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. a) 4core 35 sqmm

b) 2core 6 sqmm

c) 4core 25 sqmm

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables incl. finishing as below: a) 4 core 25 sqmm

b) 2core 6 sqmm (for Outdoor Light)

a) 4 core 35 sqmm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make- Finolex/Havells/Polycab) in the 19mm polythene pipe and by the GI fish wire and making necy. connection as required of following sizes: a) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) (from PDB to SPNDB)

b) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) (from PDB to AC)

c) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) (for PP/Computer Board)

Finishing of the PVC insulated( 2x6 + 1x4) sqmm Copper wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC copper wire (Make- Finolex/Havells/Polycab)in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Legrand/Hager/ABB) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish (Average run 8 mtr)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC copper wire (Make- Finolex/Havells/Polycab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish as follows:. a) On board

b) for 6A separate plug socket (avg run. 7.5mtr)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand/Hager/ABB) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Legrand/Hager/ABB), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & Fixing 20W single Tube light fitting (Make- Phillips, Cat no- TMC 501P 1 X T-LED 22W P3241 with 1 no LED tube lamp (MAS LED tube 1200mm 18 W865 T8 I-2100 lm) suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos.fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

S & Fixing box type Tube light fitting (Make- Phillips, Cat no- RC 380 B LED 42S suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos.fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing of 1200mm, 240V AC ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (make:- Orient Quasar Ornamental Shine-Antidust/ CG Aura Prime)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand-Crabtree/Similar Brand) on existing Modular GI switch board with top cover plate incl.making necy. connections etc.

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.

S&F 12 “ sweep 1420 RPM AC Exhaust fan incl louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as pet as practicable and providing necy. length of PVC insulated wire and making connection for exhaust (Make: EPC Heavy duty).

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top on 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. (for AC)

S & F of 74 W LED Streetlight fitting (Cat Ref no.- BRP 409 LED 074 CW HE MR FG S1 PSU GR Philips) with suitable nut, bolts, clamps, etc as required, for mounting on the GI Pole/Pipe.

S&F GI mini pole, 80 mm dia, 1.5 mtr. Long (ISI- Medium) with. 150x150x4 mm MS base plate incl. S & installation of muffing 600mm x600mm x 760mm above roof, neately cemented finish (3mm thick) suitable for alkathene/ polythene pipe entry incl. S & F 25cm X 25cm X 25cm GI loop box, 16 SWG & incl. drilled hole in pole as per GS. incl. painting with synthetic enamel paint (2 coat) on 1 coat of red oxide primer.

S&F of 1.0 mtr long MS/ Black pipe (16 swg) detachable arm bracket on pole for outdoor type SV light fittings incl. s & f 40 mm dia ISI medium MS/ Black pipe 1.0 mtr. Long inlu. S & F MS jacket (16 SWG) 300mm long befitting with 80mm dia GI pole incl. S & F of stiffering/ strengthening plate in between sleeve & arm bracket with suitable sized nut bolts as requirred incl. painting with synthetic enamel paint (2 coat) on 1 coat of red oxide primer.

S&F Timer control unit enclosure (equv.-2+8 way SPN DB) comprising with 1 no. 32A DP MCB isolator, 1 no. contactor unit, 1 no. analog time clock, 1 no. Toggle switch for manual operation & hinged type front door with interlocking arrangement and 1 no. indicator, 1no. terminal unit duly fixed on wall incl connection (Make: L&T). (For outdoor light)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level in soft soil By ISI-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Making Loop connection with 8 SWG wire to the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supplying and fixing 415V, 200 Amp TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (MAKE- L&T/Havells)

THE CITY ELECTRIC CO.

M/S SEN ELECTRICAL WORKS

MOON ELECTRICALS

R D ENTERPRISE