GE/J/A 2020-21

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil, complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular course, well bonded, bedded & solidly hearted, built in cement mortar 1:6. complete all as specified and as directed.

Extra over for hammer dressing to face stone with max depression on face from a streight edge not exc 20mm and dressing face beds and joints complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L Precast cement concrete block masonary (1:3:6) type C1, using 20 mm graded crushed stone agg with solid blocks 10 cm thichk and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8,type D-2 as in sub base to floor. complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base of floors, finished the surface even and rough complete all as specified and directed.

M&L for Joint free Non Skid coloured ceramic tiles 7 to 8 mm thick, ist quality double charged(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed. Make:-Kajaria/Johnson

M&L for Joint free Glazed ceremic coloured tiles size 450mm x 350mm and 7mm thick , ist quality double chargedas per IS-13712 Grade II(a) over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dados complete all as specified and as directed.Make:-Kajaria/Johnson

M&L for mild steel TMT or twisted bars 8 to 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc. complete all as specified and as directed.

Ditto all as per item No.11 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for M-25 design mix RCC using 20mm graded crushed stone aggregate, in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. complete all as specified and as directed.

M&L for M-25 design mix RCC using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers; lintels over 1.5m span complete all as specified and as directed.

M&L for form work to soffits of roof slabs, floor slabs and similar work n exc 200 mm thick fair finished surfaces (flat). complete all as specified and as directed.

M&L for form work to Edges to conc flat 10-20 cm fair finished surfaces (flat). complete all as specified and as directed.

Formwork for flat fair finished surface to sides & soffits of floor or roof beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. complete all as specified and as directed.

M&L for 50 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in roofs, finished the surface even and smooth with WPC complete all as specified and directed.

M&L for carrying out water proofing treatment for roofs in the following stages (a) First coat of mitumen primer confirming to IS-3384-1986 @ 0.40 kg/Sqm over and including 10mm thick cement mortar 1:4 surface finished even and smooth without using extra cement all as specified. (b) Second coat of bonding material using blown type bitumen confirming to IS-702-1988 grade 85/25 @ 1.20 Kg/Sqm. (c) Third coat of APP modified polymeric membrane centre core of 100 microne HMHDPE outer film 20 microne both sides thickness 2.00mm having weight 3.00 Kg/Sqm. (d) Fourth coat of bondig material using blown type bitumen confirming to IS-702-1998 of grade 85/25 @ 1.20 Kg/Sqm and sprinkling coarse (sieved) sand over hot bitumenous surface to form keys to hold PCC. (e) Fifth and top most layer of surface finish which act as protective layer shall be of 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded agg of crushed stone pedding well compected with V-shaped groove 6mm wide and 10mm depth filled with mastic bitumen of (1:1) of proportion complete, size of PCC panel with grooves shall not be exceed 0.36 Sqm all as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and as directed.

M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in cm 1:6 on stone/concrete masonry finished even and smooth without using extra cement. complete all as specified and as directed.

M&L for 10mm thick rendering in cm 1:6 on ceiling, concrete surface, finished even and smooth without using extra cement. complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and as directed.

M&L for 3 coats of white wash on walls including preparation to newly plastered surfaces preparation to newly plastered surfaces complete all as specified and as directed.

-do- but on ceiling. complete all as specified and as directed.

Preparation of newly plastered/unplastered surfacce and applying two coats of cement based paint over one coat of Primer on wall. complete all as specified and as directed.

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S & F factory made solid panel PVC door shutter 28 to 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , supply and fixing in the frame complete all as specified and directed.

S&F 100mm long butt hinges, extruded alluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21 complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F steel windows or ventilators partly fixed and partly top hung with glazing bars complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified and directed

S&F 3mm thick sheet glass Pin headed and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ) including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed. Make:- Cera/Hindware/Parryware

S&F bib taps 15mm long body, chromium plated, fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed .Make:- Jaquar

S & F 15 mm Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. complete all as specified and as directed.Make:- Jaquar

S&F stop valves/angular sop valve, 15mm chromium plated, fancy type, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, concealed type screwed both ends for iron pipe 15mm dia, with long shank and cup fixed complete all as specified and directed. Make:- Jaquar

S & F 15 mm bore PVC connection 600 mm long with brasss nut and PVC washer Make -Prayag complete all as specified and as directed.

S & F Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 170gms) complete all as specified and as directed.

S&F Soap dish, PVC superior quality, as per sample approved by Engr-in-Charge Make Prayag complete all as specified and as directed.

S&F WHB shelf of PTMT superior quality, min weight 300 gms as per sample approved by Engr-in-Charge Make Prayag complete all as specified and as directed.

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to trenches, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F for 75 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed.

S&F grating dome 100mm dia of PTMT (minimum weight 25 gms) complete all as specified nad directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spcified.

S & F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M & L 20 mm for Gun-metal, globe or gate valves(ISI Marked), with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M & L for machine cut kota stone slab 40-50 mm thick single piece as in partition of urinal. complete all as specified and as directed.

Cutting chasing pinning in making good to facing in CM 1:3 exe 10cm but n. exe 20 cm in stone wall. complete all as specified and as directed.

M & L for peg set of 5 of stainless steel body heavy duty all as per sample approved by Engr-in-Charge fixed with cp screws all as specified and directed.

Surface excavtion n exc 30cm deep and avg 15cm deep and getting out soft/ loose soil. complete all as specified and as directed.

Removing excavated at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M&Lfor 100 mm thick PCC (1:4:8) type D-2 using 40 mm stone aggregate as in Sub Base, complete all as specified and as directed.

M&L for sand filling under floors etc complete incl watering & well ramming comple, complete all as specified and as directed.

S&F machine made precast cement concrete blocks (interlocking pavers) rubberised finished coloured of 60 mm thick top layers of anti abrasive material and with incl laid over 50 mm thick sand cushion.The interlocking tiles joint will be filled with fine sand , complete all as specified and as directed.

S&F machine made precst cement concrete curb stone blocks using ceent concrete 1:3:6 type C1 (20 mm stone agg) all as specified and directed.

M&L for connecting 25 mm bore GI pipe from existing water supply line including necessary excavation , clamping making holes to existing pipe line, complete all as specified and as directed.

S & F 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore and fixed, complete all as specified and as directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore and fixed, complete all as specified and as directed.

M&L for 150mm dia SGSW pipes grade'A' laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore, complete all as specified and as directed.

Cutting into existing manholes for connecting new drain pipe and making good to pipe and rendering cutting out existing benching for and forming branch (1/2type B-1 smooth finished, and reforming benching as required] round or 3/4th Section) in cement concrete 1:2:4 channel, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc , complete all as specified and as directed.

Providing precast RCC using 20mm graded aggregate as in cover slab for man holes set in CM 1:6, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in soft loose soil, complete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation & mass filling, complete all as specified and as directed.

M & L for Cement concrete (1:2:4) type B2 using 40mm graded aggregate as in foundation filling or mass concrete, complete all as specified and as directed.

M&L for mild steel frame work in trusses purlins, posts etc complete using MS angle iron, MS Hollow Square or rectangular sections,flat irons etc complete incl necessary welding cutting to shape & hoisted & fixed in position complete all as directed & specified .

M&L for pre painted galvatume aluminium zinc GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with J or L hooks , complete all as specified and as directed.

M & Lfor Cutting chases in stone or concrete wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 for ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm in width, complete all as specified and as directed.

M &L for PCC (1 : 2: 4) type B2 using 40mm crushed stone aggregate as in mass concrete and filling finishing surface even and smooth w/o using extra cement complete all as specified and directed at site, complete all as specified and as directed.

M & L for 38mm wide Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design, complete all as specified and as directed.

M & L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in coping etc all as directed, complete all as specified and as directed.

M&L prep of new steel surfaces & applying 02 coats of syn enamel paint over a coat of red oxide primer, complete all as specified and as directed.

E/M Part M & L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FR) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked in and including PVC rigid conduit (MMS) ISI marked with accessories fixed Concealed in wall / roof / ceiling etc and including sunken pressed steel terminal boxes in wall and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

All as per item No 1 above but with 2.5 Sq mm single core multistanded copper conductor cable for 6 pin 15 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked . Make : Legrand/ ABB/ L&T/ Schneider/HPL

S&F switch flush type single pole one way 16 Amp ISI Marked. Make : Legrand/ ABB/ L&T/ Schneider

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked .Make : Legrand/ ABB/L&T/ Schneider

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body ISI marked Make:- Legrand/ ABB/L&T/ Schneider

S&F Bulk Head Light fittings, with1X10watt LED 230 volt 50 Hz bulk head luminaries, complete with all accessories and including connecting up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable.

S&F LED tube light fitting., 1 x 20 /22w, T8, Complete 230 v ( power factor not less than 0.90 ), etc. complete with all accesssories internally pre-wired , and connectiong up with PVC insulated and sheathed , 1100 volts grade , flexible , multistranded 1.0 sq mm copper conductor three core cable , complete all as specified and as directed.

S&F Building Seurity Light LED Type 1x45W,, single phase 240V comprising of , all fittingslfixtures pre-wired, , with epoxy powder coated, with rubber gasket with hinge arrangement on one side and two latches on the other side including 25 mm dia galvinised iron pipe light grade bracket bent to shape over all length 1.6 mtr fixed to wall with 2 Nos F1 clamps made of 40x6 mm F1 and 15 cm long 8 mm dia boiJts and nuts with washers grouted in wall including , all accessories pre-wired all as specified. Street light fitting, complete all as specified and as directed.

M & L For provisioning of Geyser 25 ltrs, complete with fixing arrangement and connected with fustner nuts etc, complete all as specified and as directed. Make:Havells/AO Smith

S&F Prewired distribution board in sheet metal encl , prewired when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 12 way , cat no. - SD 3707 , make: LEGRAND, complete all as specified and as directed.

S& F MCB SPN 40 amps 10 Ka, "C' series Make: Legrand/ABB/C&S/Schneider, complete all as specified and as directed.

S&F MCB single pole 5 to 30 Amps, 10 Ka, "C' series Make: Legrand/ABB/Schneider, complete all as specified and as directed.

M & L for earthling complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed.

Supply,laying and fixing only along the poles,floor, ground or passing through walls etc jointing and testing LT Cross Linked Polythene Insulated galvanised steel strip armoured electric cable 1100 volt grade heavy duty ISI marked with aluminium conductor and overall served with an outer sheath of PVC of cross sectional area 16 sqmm x 4 core ISI marked ,all as directed by Engg-in-charge.

Excavating in trenchs in soft/loose soil, n exc 1.5m wide and n exc 1.5m in depth; for laying of cables etc. n.exc 10sq m on plan and n exc 1.5m in depth and getting out, complete all as specified and as directed.

Removing surplus excavated material (soil) not exceeding 50 metre and deposRing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Returning, filling in trenches with excavated soil, including, spreading, levelling, watering and well rammin in la ers not exceeding 25 cm thick complete, complete all as specified and as directed.

S & L Jodhpur stone quarry faced stone slab cover 40 to 50mm thick, 25cm to 30cm wide, 60cm long, laid dry and abutting each other with gap cetween adjacent slab not exceeding 10mm over under ground cables for protection, complete all as specified and as directed.

Sand cushioning to under ground cable using river sand and gently punning for cushioning to cable all as specified.

S&F Pipe galvanized iron light grade complete with all fittings laid in road crossing, and on pole, floors buildings complete all as specified and directed ISI marked. of 40mm bore, complete all as specified and as directed.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

MOHIT ENTERPRISES

DEEKSHA BUILDERS