Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC | ₹24.7 L | L1 | Accepted-AOC By The Tender Committee |
| 2 | Rejected-Technical VSS 53 CHHEND COLONY ROURKELA 769015 | SUNDARGARH | ODISHA | 769015 | - | - | Rejected-Technical By The Tender Committee |
| 3 | Rejected-Technical | - | - | Rejected-Technical By The Tender Committee |
| 4 | Rejected-Technical PLOT NO 90 286 KHATA NO 125 97 PANDUA NEAR BAIDYANATH TEMPLE PO JARAKA DIST JAJPUR 755050 | JARAKA | JAJPUR | ODISHA | 755050 | - | - | Rejected-Technical By The Tender Committee |
| 5 | Rejected-Technical | - | - | Rejected-Technical By The Tender Committee |
Tender Value
₹24.7 L
EMD Value
₹24,740
Closing Date
24 Apr 2026, 5:00 pmClosed
Municipal Commissioner, RMC
Rourkela Municipal Corporation, Rourkela
Electrical
2026_RMC_127909_1
MC/RMC/24/2026
Open Tender
Electrical Works
Percentage
45 days
Rourkela
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹24,740
Yes
20 Jun 2026
7 Apr 2026
27 Apr 2026
7 Apr 2026
24 Apr 2026
7 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply and erection of 08 Mtrs. long swaged / step down type Steel Tubular Pole (Bottom Specification: 6.00m. Length x 139.70mm. O.D x 4.85mm. Thickness, Top Specification: 2.00m. Length x 88.90mm. O.D x 3.25mm. Thickness ) with earth work in excavation of foundation of size 3’-0” x 3’-0” x 3’-0” = 0.76 Cum in all type of soil including rough dressing and leveling the bed etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. | |||||
| 2Supply of all materials, labor, T&P for providing C.C. (1:1½:3) with hard granite broken chips of size 12mm including cost, transportation, sundries, conveyance, royality of all materials etc. complete as per direction of the Engineer-in-Charge. upto ground level : 1 x 3’-0” x 3’-0” x 2’-8” = 24.00 cft. Couping portion: 1 x 2’-0” x 2'-0" x 2’-0” =8cft. (-) Volume of pole up to top of couping : 3.14 x (0'-5½") /4 x 4'-8"=(-) 0.74 cft.=31.26cft. or say 0.88cum 4nos. | |||||
| 3 | Supply of all materials, labour, T&P and transportation for centering and shuttering of the couping portion etc. complete as per direction of the Engineer-in-Charge. 4 x1’-6” x 1’-6” =9 sq.ft. Or say 0.83 sqm 12no. | 1 | sqm | - | - |
| 4Supply and stringing of 2core 10sqmm unarmoured Al. cable with help of No.8 GI wire including supply and fixing of G.I pole clamp febricated 25mm x 6mm G.I flat etc complete as per direction of the Engineer-in-Charge. (Make: POLY CAB/Havells/Glostar/KEI) | |||||
| 5 | Supply & Stringing Of LT line with 3Ph 5 wire 95mm sq AB cable on 11 mtr long RS Joint Pole with all accessories complete. | 1 | Km | 0.58 | ₹0.58 |
| 6Supply and erection of galvanized 'D' iron complete with suitable pole clamp 75mm x 88mm porcelain shackle insulator & 15mm dia galvanized bolt & nut including painting. | |||||
| 7Supply and fixing of Galvanized stringing screw 12" x 5/8" dia. | |||||
| 8Supply and fixing of Single phase outdoor type panel board made of 16 SWG- C.R sheet of size 3'-0" x 2.'-0" x 1'-5" ( L x B x D) with epoxy grey powder coated. The panel board consisting of the following accessories. (i) Neon Indicator - 3 nos. (ii) Ring Copper Socket (iii) Timer-1 No (iv) Toggele Switch-1 No (v) 32 Amp Single pole Contactor-1 no (vi) Single phase 32 Amp Single pole MCB-2 nos. (vii) Stud Connector-1 no. (viii) Single Phase Copper Bus bar-40nos (ix) Danger Board -1 no. with comple wiring with 10sq.mm / 4sq.mm/2.5sqmm copper wire & the panel board to be fixed of on the pole with help of G.I clamp,nut and bolt ets as per direction of EIC. | |||||
| 9Supply of all materials, labour, T&P and transportation for Febrication of G.I frame (Chhanel size 2'' x 2'' x 1/4 '') including suitable arrangement for fixing of flood lights on the top of the pole as per direction of EIC. | |||||
| 10Supply & Fixing of 300Watt LED Flood light made up of pressure die-cast Aluminium housing with toughened glass and high power LED's and secondary lenses with IP-66 protection. System efficacy > 110LPW 10KV SPD included.Sample to be produced before installation of fittings.Manufacture test certificate of fittings to be submitted after completion of the work satisfactorily. Three Years On-Site Maintenance. (Make: Bajaj /Crompton /Havells /HPL /Wipro /K-Lite /Jaquar) | |||||
stage.html
html • 0.07 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_587257.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.96 MB
BOQ_587257.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .