ANNUAL MAINTENANCE AND MINOR/ REVENUE WORKS AT RESIDENTIAL COMPLEX OF OAQA, DGAQA, UNDER GE (I) RND DEHRADUN

Amount

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like bedded in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite, with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid Ceramic tiles,first quality( of approved class , colour and design/ shade) square/ rectangular) area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 15 mm thick Screed bed in Cement mortar 1: 6, with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tile, first quality( of approved class, colour and design/ shade) of size 300 x 450 / 350x450 / 350x250 thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles with and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for preparation of old painted surface wall / ceiling by brooming down loose partical, removing of smoke soot, moulds and unwanted vegetation from wall, facia, parapet etc applying one coat of cement base paint complete all as specified and directed.

M&L for complete removel of existing treated plastered or unplastered surfaces on walls and prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of cement based paint complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement with and including Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etc complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only item under respective item of sch 'A'/BOQ.

M&L for complete removel of existing plastered or unplastered surfaces on walls and applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on newly prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior paint silicon based over a coat of primer complete all as specified and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of oil bound distemper complete all as specified and directed.

M&L for preparing of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.

M&L for preparing of old painted wooden surfaces or wood based materials over 10cm width or girth with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of wooden complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheat covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover complete with fixing arrangement fancy look complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Make as approved by GE.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair bib cock long body with flange , fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make as approved by GE.

S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. Make as approved by GE.

S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. Make as approved by GE.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make as approved by GE.

S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed.

S&F in repair towel rail ,D type, brass, chromium plated,, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed.

S&F in repair Chromium plated brass wall mixer 3-in-1 system fancy type with provision for both hand shower and overhead shower complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. Make as approved by GE.

S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed. Make as approved by GE.

S&F in repair fancy type chromium plated health faucet with 1.50 meter long PVC tube cover CP flexible with wall hook suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. Make as approved by GE.

S&F in repair drapery fancy type curtain rod shall be 32 mm dia of aluminium pipe with powder coating with wooden finish including bracket rings,fancy knob , curtain ring 08 Nos minimum including all fixing arrangement complete all as specified and directed. Make as approved by GE.

S & F in repair PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius, with access door, for 110 mm bore of pipe complete all as specified and directed.

S & F in repair PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe complete all as specified and directed.

S & F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 110 mm bore of pipe complete all as specified and directed.

S & F in repair PVC (SWR) junction, with access door, single (single T) equal or unequal, for 75 mm bore of pipe complete all as specified and directed.

S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, for 75 mm dia of outlet complete all as specified and directed.

M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10 cm.complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply, fixing, laying & testing 25mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc, including taking up or down existing GI tubing and connections,including taking up or down existing GI tubing and connections, and making good the disturbed surface, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

M&L for complete removel of existing plastered or unplastered surfaces on off floor and applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on newly prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of floor paint over a coat of primer complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.

Repairing to existing door/ window chajjas upto 2.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface complete all as specified and directed. (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective.

Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface complete all as specified and directed. (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective

Demolition of plain cement concrete ( Un reinforced) of any description in any position and removal of demolished materials to a distance exceeding 500 M but not exceeding 1000m complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sunken floor finished even and smooth using extra cement with using water proofing compound as per manufacturer's instructions complete all as specified and directed. Note:- Water proofing compound shall be measured and paid for seperately under respective item of Schedule 'A'.

One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied as tack coat for APP polymeric membrane complete all as specified and directed.

One layer APP based polymeric membrance minimum weighing 3 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified and directed. Note :- Lap of 100 /150 mm and the over lap shall be sealed by flame.

M & L rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished even and sommth w/o using extra cement with liquid water proofing Compound as per manufacturers's instructions complete all as specified and directed. Note:- Water proofing compound shall be measured and paid for seperately under respective item of Schedule 'A'.

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary form work complete all as specified and directed.

M & L for providing plain cement concrete, type E-2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken, filling and mass concrete complete all as specified and directed.

Removing demolished material out of defence land depositing/ desposing at contractor own arrangement complete all as specified and directed.

Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesd. complete all as specified and directed.

S&F factory made glazed and Skelton 35mm thick first class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars, any numbers , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed.

S&F powder coated aluminium sliding window three track with two glass shutters fixing 4.8 mm thick plain glass, and one shutter with and including stainless steel wire gauge cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium power coatet sections, aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved. Note Size of aluminium section shall be under :- (i) Three track top and vertical - Jindal main-2010 section No 20829 or equivalent (ii)Three track bottom- Jindal main-2010 section No 20830 or equivalent (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube as per specification & drawings specified in SSR Part-II 2010 complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

S&F floor door stopper double leg of aluminium alloy body of 70 mm length with aluminium base plate of size 50 mm x 40mm complete all as specified & directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F in repair 150 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate including necessary welding if requried complete all as specified & directed.

S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed.

S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed.

S&F 125 mm long hasp & staple safty type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed.

S&F in repair Wire netting of stainless steel wire 1.4mm dia size mesh 12mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

S&F in repair 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 25 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane with and including Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

M&L for 4 mm thick figured glass pin headed type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane with and including Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

M&L for 5 mm thick cement plaster in 1:3 cement mortar, on concrete ceiling surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing of new plastered surface on wall and applying two coats of Oil bond distemper over a coat of alkali resitance primer over 3 mm thick wall care putty in two layer on plastered surface complete all as specified and directed.

S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms)

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

Dismanting wrought iron or mild steel work of any description as in angle /grill etc complete all as specified and directed.

M&L for Providing PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate in surface channel and drain etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F door seal bottom, rubber shield, anti rust, brown colour black rubber including necessary screws etc complete all as specified and directed.

M&L Preparing surfaces, holding the members in true position and welding in reparis exc 2.5 cm but n exc 5cm in length thickness of metal to be welded exc 6 mm but n. exc 9mm complete all as specified and directed.

M&L for 75mm thick PCC (Cement concrete) 1:3:6 typeC-2 using 40mm graded stone aggregate as in plinth protection finished even and fair and making 50mm deep joints at every 3 metre interval and at every corner and filling the joints with bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed.

Resecuring or easing & adjusting without taking of steel window leaf n exc 1.00 sqm each leaf including cleaning of pivot, re-alignment of shutter and locking system after removing of side bent all as specified as directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar including Demolition of brick work or stone boulder masnory built in cement mortar complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar complete all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tile, glossy finish 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floor with cement and pigment to match glossy finish including screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified an directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth in any type of soil for foundation, etc. or for shafts, wells cesspits, manholes, pierholes etc and getting out complete all as specified an directed.

M&L for returing filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified an directed.

Removing of excavated material (Soil) to a distance exc 250m but not exceeding 500 mtr and depositing at a level n.exc 1.5 m above the starting points complete all as specified an directed.

M&L for reinforced Precast cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregate as in landing , cover slab (for manholes, shelves), chullah hoos, chajjas, water troughs , mangers, shelves an similar articles with plain faces incluing necessary form work , & set in Cement Mortar (1:4) including demolition of old RCC covers of any description complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items

M&L for TMT bars 10 mm dia and over cut to length ,bent to shape requierd, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick masonry/ concrete surfaceon wall with using liquid water proofing compound and finishing the surfaces even and smooth without using extra cement , including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6, on fair faces of brickwork or concrete surfaces, surface finished fair and even without using extra cement complete all as specified and directed.

M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specified and directed

M&L 150mm internal dia of pipe salt glazed stoneware drain pipe Grade 'A' laid in trenches and jointed in cement & sand morater 1:1 and testing including Demolition and breaking up old pipes of any description complete all as specified and directed

M&L for Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 roun or 3/4 section) in cement concrete (1:2:4) type -B1, smooth finished , and reforming benching as required complete all as specified and directed

Supplying, transportation and fixing of RCC Bench with M-35 grade of concrete made by table vibratory method using FRP mould with strong vibratory compaction. Each cement bench consist of nos. of L-shape base support in grey cement colour (thickness 100mm, back height -1000mm, front height- 450mm, base width -620mm) and 5nos. of reinforced concrete planks in saffron colour of size 1500mm x100mx 50mm and 1 no. of reinforced concrete plank of size 1500mmx200mmx50mm and fixing through galvanized steel nut bolts. complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base.complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in surface channel and drain incluing necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc.

M&L for Cleaning of septic tank exc 50 users and n.exc 100 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for Dewatering of soak well or sewage of any dia and depth manully or by using pumps and rremoval of sludge if any to a distance exc1.5km but not exc 2Km out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning with suitable chemical of P/S trap of EWC/IWC etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning of Nahani/floor trap of Bath/kitchen/urinal/ wash basin incluing Ist gully trap etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning of Sewage pipe line from gully trap to ISt manhole an then upto the final drop into the septic tank an soak well /cess pool (except intermediate manholes ) by removing all blockage of any description in any situation in the system complete any ia of pipe an epth by rodding ,manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

M&L for cleaning of manholes any type-size and any depth by removing of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed.

S&F mild steel angle iron in fencing posts, and struts fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality fwith and including dismantling existing RCC / wooden posts complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc including Dismentling of barbed wire of any description of any position all as specified and directed.

S&F concertina coil 2.5 mm dia of core wire in 450 mm circular dia of each coil having a core wire of high carbon spring steel of high tensile strength as per grade of IS-1454(Part-I) with low carbon steel strip punched tape of 19 mm wide, 0.50 mm thick and series of knife edge sharp barb/blades @ 25 mm centre to centre punched all along the length of both sides of strip at regular interval conforming to IS-513 including Dismentling of Concertina coil of any description in any position complete all as specified and directed. Note:- Concertina coil having 50 Rounds per 6 RM.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for S/F 12 mm thick Acryalic sheet including Writing letters or figures (Block, Roman, Italic or Indian, e.g. P/10) with Radium tape night glow in dark of approved colour, width of tape 20 mm and height n exc 30 cm, on Acryalic sheet of size 300mm x 300mm fined with 4 Nos screw and fasteners etc including drilling holes on walls of buildings at any height complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distanc n exc 50 m and making good surface inany type of soil complete all as specified and directed.

Material and labour for Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, purpose made. ; length of bolt exc 15cm and n exc 30cm long. Diameter of neck 12 mm complete all as specified and as directed.

Supply and fixing Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members (Weight N exc 4 kg per square metr) complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers, clamps of desired size and shape suitable for fixing of chain link fencing on Hill side rocks or retaining wali and similar small articles conforming to Fe-290 Gde-E-165 complete all as approved, specified and directed.

M&L for making locking arrangement device to existing gate including cutting, making holes, welding etc as required at both side (in and out side ) as desired complete all as specified and directed.

M&L for M.S framed work as in doors or gates of angle or other section (sliding or hinged) with gusset plates, rails, braces, rollers etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeetc. and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for M.S framed work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete. complete all as specified and directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch complete all as specified and directed.

All as per Sl item No 127 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per Sl item No 127 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per item No.127 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLS copper earth wire for switch socket combination 3 pin 15 amps on independent board

S&F modular Switch Bell push 5 amp single Pole 230 V all as specified & directed.

S&F Bell ding dong type, AC 230 volts all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module suitable for 15 Amp plug top Multipurpose 230 V all as specified & directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, 230 V all as specified & directed.

S&F Modular Switch Piano flush type 6 amp single Pole one way 230 V all as specified & directed.

S&F Modular switch 1 way 16A, 1 module flush type single Pole one way 230 V all as specified & directed.

S&F Ceiling rose surface bakelite surface 65 x 50mm, 3 terminals all as specified & directed.

S & F Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.

S & F LED bulb 10/12 W all as specfied and directed

S & F in repair LED bulk head with bulk head 10 W ultra modern, energy saving, surface mounted, decorative with high brightness as specified and directed.

Supply & Fixing in repair LED light fitting 10 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack complete all as specified and directed.

Supply & Fixing in repair LED light fitting 20 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack all as specified and directed.

S & F modular electronic ceiling fan regulator stepped type 2 module 120 W heavy duty suitable to work on 230 volts complete all as specified.

Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height and removing its blades and refixing the same including material and labour for rewinding, with super enamelled copper conductor of suitable size, meet to original specification & speed including varnishing, heating etc including taking out old copper wire and painting of ceiling fans (Motor and blades etc) of existing colour or approved by GE with super enamelled paint one coat all as specified and directed.

M & L for Sub main wiring with 2 single core PVC insulated unsheathed cable, 1100v grade with FRLS PVC 6 sq mm copper cable multi stranded conductor drawn through in and including PVC rigid non metallic concealed conduit 20 mm dia, medium duty, ISI Marked to be terminated in DB box as per IS including of 6 sqmm dia FRLS PVC Copper cable green colour as earth wire connected to earth complete all as specified and directed.

S & F in repair MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA(type 'C') all as specified and directed.

Supply & Fixing in repair MCB SPN, 240 Volts, 32 Amps breaking capacity 10 KA (type C curve) all as specified and directed.

S & F sheet in repair metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply & fixing in repair security Light of 60 watts of ENDURA CITYLITE PLATINUM PLUS New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including housing suitable bracket, nuts & bolts, GI pipe complete all as specified and directed.

Supply & Fixing in repair LED battan with LED light fitting 20 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack all as specified and directed.

Dismantling and overhauling of fan motor of any size (1200/1400 mm) and removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol /kerosene, applying new grease and reassembling complete including replacement of wornout spares with new like split pin, nut & bolts, but excluding bearings, bushes, shaft etc. and refixing at same location complete all as specified and directed.

M&L for rewinding of exhaust fan/wall mounting fan motor size 200/250/275/300 mm sweep with super enamelled copper conductor of suitable size, meet to original specification & speed including varnishing, heating etc including taking out old copper wire before rewinding and refixing at same location complete all as specified and directed.

Supply and fixing louvers made out of sheet metal and mild steel frame suitable for exhaust fan 300/450mm sweep complete with nut & bolts etc as per existing size including grouting to wall etc complete all as specified and directed.

Material and labour for cleaning and preparation of all existing steel surfaces of pole structure of straight steel tubular poles 11 mtrs long for painting including mild steel cross arms, clamps and anti clibing device,protection pipe etc and applying one coat of aluminium paint all round the exposed steel surfaces of existing steel tubular poles structure of any description and in any position above the height of 1.50 mtr from the plinth of the pole and applying one coat of synthetic enameled paint of different colours in strips of 150mm width upto the height 1.5 mtr from the plinth of poles including writing pole No and other sign works with white paint over black painted base in the pattern and style as approved by GE complete all as specified & directed. Note : Size of black painted base for numbering shall be 100mmx25mm and the size of numbers shall be not exceeding 10cm height.

Dismantling Electric meter carefully from married accn Qtr and refixing the same near staircase with suitable housing and enclosure with transparent glass for proper checking of the meter reading complete all as specified and directed.

Supplying laying, jointing, testing and commissioning of HT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 11000 volts grade complete of size 120 sqmm 3 core complete all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc . Excavation, earthwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely)

Material & labour for Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and directed.

M&L for Un-reinforced precast concrete cable cover class HV type I, flat, size 300mm x 180mm x 40mm as proteciton to under ground cable laid dry flat adjoining each other complete all as specified and directed.

Material & labour for replacement of 50 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 1991 (Part-I) including taking out old existing earthing complete all as specified & directed.

JS CONSTRUCTION COMPANY

M/S Anil kumar