Command Control Center

Auguring and boring of holes in site for300 mm dia Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.in tools room

Under-reaming for 300 mm dia Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.

Supply and placing of the M20 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including concrete mixing, centering, shuttering, laying concrete, vibrating, curing, cost of fuil charges, wages of operation etc. complete for finished item of work.But excluding seigniorage Charges for the following items.

Supply and placing of the M20 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including concrete mixing, centering, shuttering, laying concrete, vibrating, curing, cost of fuil charges, wages of operation etc. complete for finished item of work.But excluding seigniorage Charges for the following items. for columns

Supply and placing of the M20 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including concrete mixing, centering, shuttering, laying concrete, vibrating, curing, cost of fuil charges, wages of operation etc. complete for finished item of work.But excluding seigniorage Charges for the following items.

Supply and placing of the M20 grade Design Mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including concrete mixing, centering, shuttering, laying concrete, vibrating, curing, cost of fuil charges, wages of operation etc. complete for finished item of work.But excluding seigniorage Charges for the following items. piles

Providing High Yield Strength Deformed (HYSD) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc. ,and overheads & contractors profit complete for finished item of work as per SS and as directed by the departmental officer incharge of the work

Brick masonry with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source including cost and conveyance of all materials like cement, sand, bricks, water, seoffoldings, lifting etc., to site, including all materials and such as labour charges, like mixing cement mortar, constructing masonry, , curing for finished item of work etc complete as per SS and as directed by the departmental officer incharge of the work. But excluding seigniorage charges

Plain Cement concrete PCC (1:4:8) using 40 mm HBG mechine crushed metal with concrete mixer. This rate including cost of all materials and labour charges , watering, ramming, machine mixing, vibrating, centering etc., Complete and as directed by the departmental authorities of the work. But excluding seigniorage Charges

Painting to Walls with Two coats of Plastic Emulsion paint over one coat of cement primer total 3 coat of Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for internal walls

Painting to Walls with Two coats of Plastic Emalusion paint of over one coat of cement primer total 3 coat Approved Brand and shade after throughly Brushing the surface to remove all dirt and remains of loose powdered meterials cost and conveyance of all material and labour charges etc., As per S.S.911 and as directed by the departmental officer in charge of the work for External walls

Supply, Installation and commissioning approved make floor mounted EWC (suit) CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour etc., complete as per ss and as directed by the departmental officer in charge of work. (BMW-D.18)

Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping etc., complete as per ss and as directed by the departmental officer in charge of work. BMW -A.02

Supplying, laying, jointing and testing 152.4 mm SWG SP1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5'0") depth and refilling with watering and tamping etc., complete as per ss and as directed by the departmental officer in charge of work.

Supply of SWG Junctions (T's & Y's) conforming to IS standards with length of barrel 60 cm for 100 x 100 etc., complete as per ss and as directed by the departmental officer in charge of work.

supply, delivery and fixing 110 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe - 6 Kg/sq.cm as directed by the departmental authorities etc., complete as per ss and as directed by the departmental officer in charge of work.

supply delivery and fixing 110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings etc., complete as per ss and as directed by the departmental officer in charge of work.

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge of the work for finished item of work Toilet Doors D2 0.75x2.10m BMT-N.05

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work BMT-N.02

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of workas per SS and as directed by the departtmental officer in charge of the work for Internal walls

Providing and fixing factory made uPVC any colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension, EPDMgasket/ TPV, zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc.Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also onweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent .Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm (MAT-05438) etc complete as directed by the departmental office in charge of the work

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & Providing and fixing factory-made uPVC any colour sliding glazed windowupto 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of

Supply of 2.0TR, 5star capable of delivering not less than 21600 BTU/hr and above with operating on refrigerant R-410A / R-32Makes: As per list of recommended brands as category I...INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation Makes: Mitsubishi / O General (prevailing models in the market)

Supply and run of 1 of 1.5 Sq mm FR P.V.C. insulated flexible copper cable in existing pipe forearth continuity including all labour charges etc.,complete. 1.5 Sq mm Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay/Salzer.this rate including cost of materials other incidental charges etc., completed as directed ie rate

Supply and run of 1 of 4.0 Sq mm FR P.V.C. insulated flexible copper cable in existing pipe forearth continuity including all labour charges etc.,complete 4.0 Sq mm Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay/Salzer as per IE ruly and as directed by the department

Supply and run of 1 of 2.5 Sq mm FR P.V.C. insulated flexible copper cable in existing pipe forearth continuity including all labour charges etc.,complete Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay/Salzer as per IE ruly and as directed by the department

Supply and run of 1 of 6.0 Sq mm FR P.V.C. insulated flexible copper cable in existing pipe forearth continuity including all labour charges etc.,complete Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay/Salzer. as per IE ruly and as directed by the department

Installation of Split Air Conditioners. For 2.00 tn including all labour charges other incidental charge etc., complete as directed IE ruls

Supply, Fabrication of 1set MS bracket suitable for fixing outdoor unit of split AC unit. including all labour charges other incidental charge etc., complete as directed IE ruls

Supply of 5.0 KVA. 1-phase, automatic Electronic Voltage Stabilizer. Makes: As per list of recommended brands of Makes: V-Guard / Real Guard / Uni Stab / ITL.as category I. MAT-03848

Plastering with cement mortar (1:3), 12 mm thick on Rcc work aas per technical specification Section 1300 & 2200 MORTH including cost and conveyance of all materials and labor charges for mixing cement mortor, smooth finishing, seoffolding, lifting and other incidental charges etc., complete laying, finshing the surface true to alignment and curing as per SS and as directed by the departmental officer incharge of the work

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, i ias per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Madular switch, Ceiling rose and 6 Modular covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per IE Rules and as directed by the departmental officer incharge of work

Supply of 63A, FP Isolator Isolator. This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per IE Rules and as directed by the departmental officer incharge of workMakes : Makes: ABB- S200/Standard / Havells-euro II / C&S /Lauritz Knudsen (formerly L&T) -Exora/ GM/Gold Medal/ Salzer /Polycab/ illion/Benlo/BCH/Eaton ELEC-2.11.2 G

Supply and fixing of 2 modular 16A 3pin plug Modular socket with shutter and 16 Amps Modular switch control on Common covered frame board including earth connection and all labour charges etc., complete on wall. This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per IE Rules and as directed by the departmental officer incharge of work

Supply and fixing of 2 module 16A 3pin(2 Nos) , 2 module 6A 3pin plug Modular socket(1 No) with indicator lamp and 16Amps Mcb switch control (5 in one) on Common covered 8 modular frame board including earth connection and all labour charges etc., complete on wall. This rate including cost of materials, transporation to site of work, other incidental charges all labour charges, fixing as per IE Rules and as directed by the departmental officer incharge of work

Supply of (8 +18) 6 Way TPN DB Horizontal with IP 43, protection suitable for installation of …18 Nos. of SP outgoing MCBs and for 1 No 4 pole, MCB/Isolator incomer along with provision for 1 No of 4 Pole RCCB/ELCB etc., complete as per IS 8623; IS 13032; IEC 61439-3. Makes: As per list of recommended brands as category I. Legrad/Ekinox/Schneider-A9/Knvdsen(for merly L&T -New range/Indo Assion- opti pro/HPL( Techno / annher/ABB- Itus/

Supply and fixing of 24W LED Slim Panel Round /Square suitable forRecessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty.This rate including cost of all labour charges, transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work MAT-03314 Makes: a) LUMINAIRE MAKE : Phillips (Pureline Slim) / GE Venture / Crompton / Wipro / Bajaj / Havells (Dustello) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG.

Supply and fixing of 12W LED Slim Panel Round /Square suitable forRecessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty. This rate including cost of all labour charges, transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work MAT- 03311 Makes: a) LUMINAIRE MAKE : Phillips (Pureline Slim) / GE Venture / Crompton / Wipro / Bajaj / Havells (Dustello) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/LG.

Supply and fixing of 18W heavy duty LED Down lighter, suitable for Recessed mounting made of pressure diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LEDs, having System Efficacyof >= 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI > 70,Luminaire performance complies to IS 10322 (Part 5 / Sec-2) etc., complete with earth connection and not less than two years warranty.This rate including cost of all labour charges, transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work LUMINAIRE MAKE : Phillips (Pureline Slim) / GE Venture / Crompton / Wipro / Bajaj / Havells / Halonix/HPL/GM/ Grenlift/GOLD MEDAL/Every on/ Fortuns Arrt/Rhinol/

Supply of 48" (1200mm) Sweep star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min, but without Regulator.of makes Makes: Crompton (HS Plus/HS) / Havells (ES PLUS/Samraat neo) /Orient Energy Star/ Halonix(Zephyr) /Polycab(Zoomer-HS) / G.M.(G AIR) ELEC-5.1.3

Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering. This rate including cost of all labour charges, transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work MAT-04245

Supply and fixing of 20 mm Steel tube fan down rod. This rate including cost of all labour charges, transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete. This rate including cost of all labour charges, transporation, other incidental charges etc complete as per IE Rules and as directed by the departmental officer incharge of work