Development of LIG-2 Park (Plot No.236) with walking track, play equipment, open gym, compound wall repairs and painting at UDA Colony, Ward No.63 in Circle-II area..Rc.E3.PD3(Parks)-107752/2026

Engaging Procliner(110) D50 ire basis for removing of high berms,waste materials ,tree trunks,sectioning ,lifting material including cost and conveyance of material as directed by the departmental authorities

Engaging Tractor on hire basis for lifting of high berms,waste materials ,tree trunks,sectioning ,lifting material including cost and conveyance of material as directed by the departmental authorities

Engaging NMR on hire basis for lifting of high berms,waste materials ,tree trunks,sectioning ,lifting material including cost and conveyance of material as directed by the departmental authorities

Engaging Air compressor7 cmm(diesel) on hire basis including operator charges and fuel charges , cost and conveyance of material as directed by the departmental authorities

Collection and Supply of Red Earth including excavation, Cost and conveyance, Spreading, Sectioning etc., complete.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, s per SS - 20 B (APSS 308)

Providing concrete for plain concrete (M20 Nominal mix) using 330 Kgs Cement 20 mm,10mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Collection and Supply of Dust for filling including Cost and coneyance charges, Spreading, Sectioning etc., complete.

Supplying, fitting and placing HYSD bar reinforcement as per drqwings and technical specifications clauses 1000 and 1202 MORD & 1100, 1600 MORTH for bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of binding wire and preparation and tying grills and fixing in position and labour charges etc., complete

Providing concrete for plain concrete (M10) using 220 Kgs Cement ,40 mm nominal size hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Supply and fixing of C.C. Kerb not less than M35 strength of size 600 X 450 X 110 mm thick with bottom thickness of 110 mm upto height of 300 mm and top width of 50 mm thick chamfering with 45° at starts at 300 mm height to 375 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work.

Supply and placing of the RCC M20 (Design Mix) concrete corresponding to IS 456 using 60% of mixer 20mm size graded machine crushed hard granite metal (coarse aggregate) 40% of 12mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry, cement 350Kgs including cost and conveyance of all materials like cement, fine aggrregate (sand) coarse aggregate, water etc., to site and all labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.

Brick Masonry in CM (1:6) with Bricks traditional size 23x11x7 cms 2nd class including cost and conveyance of all materials and labour charges for mixing of mortor watering curing etc. complete.

Plastering in CM (1:4) 12mm thick including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc.

Painting, priming coat on new plastered surface to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS

Painting with Plastic emulsion paint Grade-I to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work as per SS.Two coats -Plastered Surface(External Walls)

Manufacturing, Supply, Delivery and fixing of M.S. Iron Gate , MS Grill using with M.S. Angulars, M.S. flats including cost and conveyance of all materials and labour charges for cutting, welding, grinding and fixing etc., , complete.as directed by the departmental authorities.

Collection and Supply of Sand for filling including Cost and coneyance, Spreading, Sectioning etc., complete.

Supply and fixing of Granite finished Benches with back and arms rest including material charges, transportation wages, labour charges, technician wages and all other incidental charges etc., complete as directed by the departmental authorities

double Arch Swing single Arch swing of 6.50m x 1.50m size Two seated with 6m long 80NB GI Pipe bent in single piece and welded together with a flange 5mm their of IS 40x40x5mm to form a strong frame bottom and middle height of the frame in 2700mm; top pipe 50NB GI pipe 2950mm length; swing clamp assembly made up of two parts are joined together with M6 allen bolts along with ‘S’ hook to house a bearing for smooth and noiselen swing; rubber dip molded 6 mm dia 1450mm along swing chain; ‘S’ hook of 8mm dia 145 x 130mm triangular hook of SS 304 grade; seats made of LLDPE; self lubricated SKF/ NTN/ NACHI make bearings; pins and clips of 12mm dia – all framing pipes of ‘C’ class GI pipe of Tata / jindal make and powder coated multicolor optional painting of 50-70 micros and all materials shall confirming to IS codes.

Double Sea saw with 4 seated ; 8 feet length and 4 feet width 1 – 6” height mounted on central frame structure of 80NB ‘C’ class GI Pipes of Tata / Jindal make and with proper hinges, holders. Bolts and nuts, powder coated multi color painting to 60 to 70 microns and seat of high quality LLDPE materials – all materials confirming to IS codes.

6 Seater Merry Go Round made of GI frame of ‘C’ class Tata / Jindal make vertical pipe of 80NB; and framing pipes of 32mm NB & 50mm with LDPE seating base 6 feet dia and powder coated multicolor optional painting of 50-70 microns and all materials shall confirming to IS codes.

Orbital climber: Circular clumber mounted on 4 no.s vertical posts, central supports clumber on two faces made of ‘C’ class Tata / Jindal make GI pipes 80mm dia for vertical and 50 – 32 dia pipe for frames with 8 feet x 6 feet x 7 feet; powder coated multicolor paintings, all materials shall confirming to IS codes.

Cresent Slide : Main pipe made from 90 NB Mild Iron with heavy quality of pipes and standing flat form support pipes are made from 42 NB and 32 NB supports Mild Iron with heavy quality of pipes. Ladder steps and support pipes heavy Mild Iron, Crescent slide are made from heavy FRP of 6mm thickness.

Sky Walker Double *Dimensions: 1700 mm (L) X 830 mm (W) X 1650 mm (H). Supply, Delivery and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips at handle grip hold. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Pins should be case hardened and centreless grinded finish for life long durability. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total footrest structure is supported on base frame shall be made up of rectangular pipe of 48 X 48 X 2.9 mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick M.S. plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Seated Puller Double **Dimensions: 1740 mm (L) X 740 mm (W) X 1850 mm (H) Supply, Delivery and Commissioning of SEATED PULLER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of 1.8 mm thickness with dip drawn pressed with uniform bending of 20mm to have free from sharp edges & burrs. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Triple Standing Twister *Dimensions: 1570 mm (L) X 1570 mm (W) X 1350 mm (H) Supply, Delivery and Commissioning of STANDING TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes shall be of SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.

Thaichi Spinner 4 Wheel *Dimensions: 1230 mm (L) X 520 mm (W) X 1500 mm (H) Supply, Delivery and Commissioning of THAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00 mm, support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & THAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of "C" class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy-duty bearings should be reputed SKF make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. All pipes shall be uniformly powder coated with AkzoNobel up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8 mm. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 24 X 24 X 3.8mm. The instruction plate of size 150mm X 230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with "Kakinada Smart City" Corporation emblem and your company emblem at two sides facing to users with LASER printing. All Nuts, Bolts,Washers should be of SS 304 material. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity.