Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-AOC CHETTIYADA KANNADY PO PULINCUNNOO ALAPPUZHA | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.1 L+₹43,810.44 (0.94%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | JOSHY VARGHESE L1 | VIJAY V NAIR L2 |
|---|---|---|---|---|---|
| 1.00Appendix A .Proactive Maintenance or Initial Rectification Works | |||||
| 1.00 | OD232756/2024-2025:Scarifying the existing bituminous road surface to a depth of 50 mm then levelling the ground with scarified material mixed with water at OMC and then by rolling so as to achieve minimum dry density for embankment construction | 420 | sqm | 8.3 ₹3,486 Lowest | 8.35 ₹3,507 |
| 1.00 | 4.2.A.2:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-IV - For lower sub-base - Mix in Place Method | 86.4 | cum | 3,807 ₹3,28,924.8 Lowest | 3,810 ₹3,29,184 |
| 1.00 | 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | 62.1 | cum | 3,944 ₹2,44,922.4 Lowest | 3,950 ₹2,45,295 |
| 1.00 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. | 18.32 | cum | 2,761 ₹50,584.28 Lowest | 2,770 ₹50,749.17 |
| 1.00 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. | 6.02 | cum | 6,030 ₹36,276.48 Lowest | 6,035 ₹36,306.56 |
| 1.01 | 55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores. | 12.3 | cum | 3,337 ₹41,061.79 Lowest | 3,340 ₹41,098.7 |
| 1.01 | 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. | 405 | sqm | 68 ₹27,540 Lowest | 69 ₹27,945 |
| 1.01 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. | 7,253 | sqm | 13.25 ₹96,102.25 Lowest | 13.35 ₹96,827.55 |
| 1.01 | OD232755/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:- Case I, Type - A By manual means - Providing, laying, and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade. | 7,253 | sqm | 311 ₹22,55,683 Lowest | 315 ₹22,84,695 |
Tender Value
₹43.3 L
EMD Value
₹50,000
Closing Date
28 Aug 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Office of The Executive Engineer PWD Roads Division Alappuzha
GENERAL RM 2025 26 RC 2 Phase 1 Zone I One year Running Contract for various PWD roads under Road section Ramankary in Alappuzha district 4 road stretches for a length of 8.89 km General Civil work
2025_PWD_789010_1
PWD/RB/TR/1292/2025_5_1_1/1
Open Tender
Civil Works - Roads
Item Rate
365 days
Alappuzha
As per RC Special condition
10 documents required · 10 mandatory
₹2,760
Yes
₹50,000
Yes
15 Oct 2025
20 Aug 2025
29 Aug 2025
20 Aug 2025
28 Aug 2025
20 Aug 2025
Amount
Appendix A .Proactive Maintenance or Initial Rectification Works
OD232756/2024-2025:Scarifying the existing bituminous road surface to a depth of 50 mm then levelling the ground with scarified material mixed with water at OMC and then by rolling so as to achieve minimum dry density for embankment construction
4.2.A.2:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-IV - For lower sub-base - Mix in Place Method
4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.
5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD232755/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:- Case I, Type - A By manual means - Providing, laying, and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade.
OD232757/2024-2025:Removing old existing vinyl sticker works on the display board of running contract and replacing with new vinyl sticker including lettering, symbols and transporting to the site etc as per approved drawing and directions of Engineer
Appendix B-PreMonsoon Works
OD232766/2024-2025:Engaging mazdoor for lowering side berms ,clearing side drains, removing silt from culverts, cutting earthern drain,Diverting blocked water ,assisting wood cutter in cutting dangerous trees branches of trees leaned towards the road threatening pedestrains & traffic & removal of fallen trees for branches on the roads, clearing traffic blockage ,stacking the wood in a suitable place & other various works as directed by the Engr in charge
OD232768/2024-2025:Engaging wood cutter for removing dangerously overhanging branches of trees
OD232769/2024-2025:Hiring charges of hand machine for cutting wood including fuel .rope ,other sundries
OD232765/2024-2025:Filling up pot holes with bituminous ready mix compound ( 25kg bag)and compacting and ramming to get a compact surface including of cost of material,laying charges ,transportation to the site etc complete rate is arrived for a bag of 25kg.
OD232764/2024-2025:Engaging JCB for emergency works if any
OD232767/2024-2025:Engaging tipper for removing wood & material from road side as per the direction of departmental officers etc
2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area
Appendix C-Preventive Maintenance Works
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
55.7.a:Providing bitumen leveling coarse between 40mm and 150mm with 36mm deptl metal by spreading the metal to line and levels and rolling until the compacted coarse aggregate has a firm surface and applying hot bitumen with pressure sprayer at the rate of 20 Kg per M3 metal including all cost of bitumen conveyance heating mixing spreading in appropriate locations to proper levels compacting with power roler and other sundry stores.
OD232762/2024-2025:Engaging labour with passenger car having less than 1000 CC for Conducting and Reporting Routine Inspections for the entire length of the Project road at frequency of 7 days throughout the agreement period of the Running Contract as directed by the departmental officers at site.
2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD252972/2024-2025:Close Graded Premix Surfacing/Mixed Seal Surfacing:- Case I, Type - A By manual means - Providing, laying, and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using penetration grade bitumen using V G 30 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade.
Appendix D-Emergency Works
OD232758/2024-2025:Engaging JCB for emergency works if any
OD232759/2024-2025:Engaging man mazdoor for emergency works if any
OD232760/2024-2025:Engaging wood cutter for removing dangerously overhanging branches of trees
OD232761/2024-2025:Hiring charges of hand machine for cutting wood including fuel .rope ,other sundries
VIJAY V NAIR (BID ID -2312513)
Bidder Name
JOSHY VARGHESE
VIJAY V NAIR
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .