Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹5.2 L+₹10,655 (2.08%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹5.6 L+₹47,550 (9.26%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹18,400
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Dharamshala
AGE (I) Dharamshala PIN-176216
WELCOME MAINTENANCE TO MD ACCN AT MIL STN DHARAMSHALA
2022_MES_526119_2
AGE(I)/DSL-04/2022-23
Open Tender
Civil Works
Item Rate
270 days
AGE (I) Dharamshala
As per NIT
8 documents required · 8 mandatory
₹500
AGE (I) Dharamshala
₹18,400
Yes
16 Nov 2022
25 Jun 2022
29 Jul 2022
25 Jun 2022
26 Jul 2022
2 Jul 2022
Amount
Demolition of cement concrete in ground floors and paving, not exceeding 15 cm thichness (below or above ground level), un-reinforced, complete, all as specified.
Taking down chokhats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 each and removing from site, all as specified.
Taking down chokhats or frames including shutters (without taking off shuffers from the frame) not exc. 1.5 but not exc.4 Sqm each and removing from site, all as specified.
Taking down shutters not exc. 1.0 Sqm and removing from site, all as specified.
Taking down shutters exc. 1.0 Sqm but not exc. 2.0 Sqm each and removing from site, all as specified.
Dismantling floor, earth or wall including cement mortar bedding, complete all as specified.
2nd class hard wood (Sal/Hollock) plain, solid, straight chowkhats or frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned at joints with one or more rebates, complete all as specified.
Factory made 2nd class soft wood (Sal/Hollock) 30mm thick glazed and skelton window/ventilator shutters rebated and open rebates and prepared to receive glass gauge etc. , (with out sash bar) divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any members, size of members of shutter as specified in clause 8.24 (b) of SSR part-I, fitted to chowkhats, all as specified.
Factory made 2nd class hard wood (Sal/Hollock) plain, framed, panelled 35mm thichk shutters (two panels) with lock rail and panels of 9mm BWP commercial plywood or 12mm veneered particle with commercial face veneers on both sides. The size of rail and style clause 8.24 (a) of SSR part-I, kiln seasoned and chemically pressure, all as specified.
Aluminium, anodised, barrel tower bolts of extruded section and fixed with 150mm long bolt all as specified.
Aluminium, anodised, barrel tower bolts of extruded section and fixed with 100mm long bolt all as specified.
Butt hinges, medium weight, cold rolled, mild steel 100 mm long, all as specified.
Butt hinges, medium weight, cold rolled, mild steel 75 mm long, all as specified.
Anodized aluminium alloy handles, fabricated type, anodised of size 150mm, complete all as specified.
Anodized aluminium alloy handles, fabricated type, anodised of size 100mm, complete all as specified.
300mm long anodized aluminium alloy sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 16mm dia, with and including a minimum of 6 bolts and nots, 4 on bolt plate and 2 on stapple plate, 300mm long,all as specified.
Sheet glass 3mm thich ordinary quality and glazing with oil putty/wooden beads in squares, not exc. 0.5 Sqm in each pane, all as specified.
Supply and fix corner glass shelf (with brackets) all as specified. Make: Jaguar Cat No : ACN-1173 or equivalent as approved by AGE(I).
Supply and fix rectangular soap dish all as specified. Make: Cera cat part No: F5002106 Montana Soap dish or equivalent as approved by AGE(I).
Mild steel galvanized wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks or wire staples or wooden beads, all as specified.
Preparing wood surface and wood based materials or any description and girth, not otherwise described, and treated with one coat of creosote oil complete all as specified.
Taking down cement plaster on brick or stone surface etc. including raking out joints, hacking for key, scrubbing down with water etc. all as specified.
Rendering 15mm thick cement plaster in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brick work and surface finished even and smooth without using extra cement, all as specified.
Rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or on concrete surfaces and surface finished even and smooth without using extra cement, all as specified.
Distempering with 1st quality acrylic distemper/emulsion (ready mixed) having VOC content less than 50 gms/ltr , or approved manufacturer of required shade and colour complete as per manufacturer,s specification with two or more coats over new surfaces completely removed old surfaces all as specified. Make-:Asian Paint: Apcolite premuim Emulsion or equivalent as approved by AGE(I).
Preparation of newly plastered wall surfaces and applying two coats of chalk whitening preparatory to distempering complete all as specified.
Preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified.
S&F vitrified ceremic coloured dark shades tiles, 10mm thick (Square/rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.
Mat finish (non skid), Premium class I grade, coloured ceramic tiles, 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.
Glazed ceramic tiles, Premium class I grade, coloured of size 300mmx600mm/450x300mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed with white or coloured cemet, fix over and including 10mm thick rendering in cement mortar 1:4 on surfaces of walls complete, all as specified.
PVC valve less, syphonic action type flushing cisten 10 liter capacity, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450mm long PVC connection with at both ends all as specified.
M&L for PCC 1:3:6 type C2 using 40mm graded aggregate for subbase complete all as specified and as directed by Engr-in-Charge.
PCC, M-15, nominal mix, type B-1 using 20 mm graded mechanically crushed stone aggregatesas in floors, 25mm thick, finished even and rough to receive floor finishescomplete all as specified.
Vitreous Chinaware wash down water closet (pedestal pattern), white incl connection to drain and flush pipe seat cover, CP jet and pipe complete all as specified, (excluding flushing cistern and flush pipe), etc all as specified.
S&F in repair 15mm bore CP angle valve cast copper screwed down high pressure with crutch or butterly handle screwed both ends for iron pipe complete all as specified.
Chequered cement concrete tiles machine pressed heavy duty glossy tiles of size 30cmx30cmx25mm thick set jointed & pointed in neat cement slurry in floors with Grey cement and pigment laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified.
Two coats of synthetic enamel paint on old wood or wooden based surfaces of any description, exc. 10cm width or girth including preparation of old wood surfaces all as specified.
Preparation of old decorated plastered or unplastered surfaces, including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulded, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls all as specified and as directed by Engineer -in -Charge.
All as per item No 38 here-in-before but one coat of white wash on ceiling.
All as per item No 38 here-in-before but one coat of oil bound distemper on walls.
All as per item No 38 here-in-before but two coat of oil bound distemper on walls.
Complete removal of existing treatment including washing, rubbing down and stopping of white wash / colour wash / cement base paint / synthetic enamel paint of wall surfaces complete all as specified.'
Applying two coates of all weather exterior paint over a coat of primer on walls complete all as specified.
Preparation of old painted wooden surfaces of any description and otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make-: Asian paints: APCOLITE Premuim Satin enamel or equivalent as approved by AGE(I)
Preparation of old painted steel surfaces of any description and not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make-: Asian paints: APCOLITE RUST SHIELD or equivalent as approved by AGE(I).
S&F in repair 25mm dia CP curtain rods complete all as specified. Note-: CP globes and CP bracket shall be provided by the contractor as required at site and rate shall be deemed included in the quoted rate.
RD BUILDERS
M/s Gobind Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .