C/o FRH Raingaloo

Amount

Sub Head:- Site development and development of approach road Excavation in soil in hilly area by mechanical means i/c cutting and trimming of side slopes and disposing of excavated earth with ia lift upto 1.5mtrs and a lead upto 20mtrs. As per technical specificatio clause 1603.1

Excavation in foundationtrenches etc.in earth work lift upto 1.50mtr.i/c stacking the excavated soil not more than3mtrs. From the edge of excavated soil,consolidating each deposited layer by ramming and watering and thendisposing of all the surplus excavted soil as directed with in a lead of 20mtrs.Pick & Jumper work.

Dressing of earth i/c cuting and filling upto 15 cm

Providing and laying cement concrete 1:6:12 (1Cement : 6 Sand : 12 graded stone aggregate 40mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approve quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 ( 1 cement : 6 sand). Construction of rubble masonry in B/wall & R/walls revetment walls and parapits in CM 1:6.

Laid dry

Stone work HDCR (Ordinary work) in super structure up floor two level in cement mortar 1:6 i/c pointing with cement mortar 1:2. Square or rectangular pillars.

Providing and laying cement concrete 1:2:4 (1Cement : 2 Sand :4 graded stone aggregate 40mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

Providing and fixing MS railing of requird pattern in stone pillars etc.(Ornamental grill).

Providing and fixing moulded hand rail of MS hollo pipe 50 mm dia welded in streight length over MS flat at top of vertical blusster i/c one coat of red oxide priming coat complete(MS flate & balusteres of railing shell be measured and paid seperately.

Steel work welded in built up section trusses and framed work including cutting hosting fixing in posistion and applying priming coat of red lead paint.

Stone soling under floor property hand packed and consolidation by hand ramming complete

Providinfg and laying heavy duty precast cement conc. Interlocking pavour blocks vibro compected upto M-50 grade including curing etc. complete.(60 mm thick)

Precaste terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in treads of steps i/c rubbing and polishing complete.

Applying priming coat over new steel work and other metal surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool scrappers and sand paper complete.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters. Landig of stair case & beams at ceiling level.

Construction of main building portion of FRH -Excavation in foundation trenches etc in earth work lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear form the edge of the excavaion and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera , consolidating each deposited layer by ramming and watering and then disposing of all surplus excavatCutting in earth work in all kinds of soil such as pick work , jumper work, pick jumper work, pick jumper blasting work, jumper blasting work, blasting work (soft and hard rock) conglomerate rock including/ chiseling wedging out of rocks (where blasting is prohibited), saturated soil and their intermediate classification of soil including ramming and de-watering where required as per the geometrics, grades and levels shown on the drawings, including clearing of jungles uprooting of trees, vegetation, grass wood trees and sapling of all girth upto any heights/depths and removal of rubbish up to any distance outside the periphery of the area including staking the useful material along the road side and disposal of all unserviceable materials through all modes of transportation with in all leads and lifts. Any loss to public or private property during the course of execution shall be the responsibility of the contractor, which shall have to be duly compensated by him at his own cost in all cases to the extent of the damages occurred as directed by the Engineer-in-charge.ed earth as directed with in a lead of 20metres in pick jumper work.

Providing and laying cement concrete for 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing form work with steel plates 3.15mm thick welded with angle iron in frames 30x30x5mm. So as to give fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr and removal of the same for insitu-reinforced concrete and plain concrete work in:-Foundations and footing, bases of columns and the like and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc upto 200mm in thickness-Above Plinth and upto floor two level .

Columns, pillars, posts and struts square rectangular or polygonal in plan.-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Beams, cantilever, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1mtr in depth-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Stair cases with sloping or stepped soffits excluding landing.Above Plinth and upto floor two level .

Edges of slabs and breaks in floors and walls under 20cm wide.Above Plinth and upto floor two level .

Providing and laying CC 1:4:8 and cutting etc. complete in foundation

Providing and laying reinforced cement concrete design mix 1:2:4 equivalent to M-25 grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work, the mix shall be designed as per requirement of I.S. code/ drawing and P.W.D. specification and will be got approved from the Engineer-in-Charge prior to the casting the theoretical consumption of cement for these item shall be worked out as per approved design mix or minimum content of cement shall be as per I.S. code/ design and specification, whichever is more in:-Foundation footings bases of columns and the like and mass concrete.

Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever.-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Column ,pillars,posts and struts upto floor two level-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Stair case (except spiral stair cases) excleding landing but including preparing of the surface and finishing noising . Above Plinth and upto floor two level .

Providing and laying reinforced cement concrete design mix 1:1:2 (1 cement : 1 sand : 2 graded, crushed stone aggregate 20mm nominal size) equivalent to M-25 grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work, the mix shall be designed as per requirement of I.S. code/ drawing and P.W.D. specification and will be got approved from the Engineer-in-Charge prior to the casting the theoretical consumption of cement for these item shall be worked out as per approved design mix or minimum content of cement shall be as per I.S. code/ design and specification, whichever is more in reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand ) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level.

Providing and laying 20mm (Twenty millimetre) thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6 (One Cement : Six sand) and concrete backing with cement concrete 1:3:6 (one cement:three sand:six graded stone aggregate 20mm nominal size) on inner face of walls including centring, shuttering and propping complete upto floor all level.-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Precast concrete block masonry in partition wall 10cm thick with solid blocks of approval size including quoin blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 40mm (forty millimetre) and down gauge in cement mortar 1:6 (one cement : six sand).-Foundation plinth upto floor two level.

Above floor two level to floor three level.

Providing wood work in frames of doors, windows clerestory windows and other frames wrought framed and fixed in position 2nd class deodar wood.

Providing and fixing 40mm thick second class deodar wood shutters, panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows and including black enamelled iron butt hinges with necessary screws.

Providing and fixing 40mm thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm ( Zero point fifty six millimetre) for door windows, clerestory windows including bright finished/black enamelled iron butt hinges with necessary screws .

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position 2nd class deodar wood.

Providing and fixing plain lining with tonguesd and groved jointing and screws ( frame work and cover fillets to measured and paid separately with 2nd class deodar wood.2nd class deodar wood.

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitering at junctions 1st class deodar wood.

Providing and fixing 12mm thick 150mm vide pilmet with 25mm dia meter wooden curtan roads and brackets including fixing 25x3mm M.S. flat at 10cm long and plugs etc. complete 1st class deodar wood.

Provding and fixing M.S grills of required pattern in wooden frames of windows etc with M.S flats, square or round bars with round headed bolts and nuts or by screws plain grill.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm diametre bolts and nuts and wooden plugs and embedding in cement concrete block 30x10.15cm in 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm nominal size.

Providing and fixing 1st class Deodar wood.75mmx60mm rounded hand rail in straight length complete in 1st class Deodar wood.

Providing and fixing 1st class Deodar wood.1st class Deodar wood. 25 mm+ 25mm balusters 25 mmx 25 mm square wrought fixed with ends housed ( square or splay) to hand rails and treads or strings complete

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) brass sliding door bolts anodized colour and shade with bolts and nuts screws etc complete.-300x16mm (Three hundred fifty into sixteen millimetre)

200x16mm (Two hundred into sixteen millimetre)

Providing and fixing brass tower bolts (barrel type ) anodized transparent or dyed to required shade and colour and with screws etc. complete -250x10mm (Two hundred fifty into ten millimetre)

250x10mm (Two hundred into tenmillimetre)

100x10mm (Two hundred into tenmillimetre)

Providing and fixing brass handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete -125 mm

Providing and fixing 19mm (nineteen millimeter) thick water proof termite resistant commercial board box and its shelves including 19mm (nineteen millimeter) thick commercial board shutter with back side of the cabinet of 8mm (eight millimeter) thick ply and cut portion of the shelves to be finished with 6mm (six millimeter) hard wood edging complete including piano hinges and other accessories including carriage of materials with in all leads, lifts and other incidentals.

Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 ( 1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete. 25mm thick.-Above Plinth and upto floor two level .

Kota stone slab 25mm thick in riser of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement : 3 sand) and jointed withgrey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.-Above Plinth and upto floor two level .

Providing and laying granite stone in flooring 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement : three sand) laid over and jointed with cement slurry mixed with pigment to match the shade of granite stone including tubbing and pilishing complete 20mm (Twenty millimetre) thick.

Providing and laying Duro stone vertified tiles (30x30 mm) of approved quality in laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying Duro stone vertified tiles (300x300mmx10mm) in grey/colored or of approved shade in dado laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

25mm thick wooden plamking tongued and groowed in placing to wooden base frame with iron screws complete base wooden frame to be measured and paid for separately) first class deodar wood planks.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm diametre with prepainted limpet and rubber wasshers complete with all accesories as required as per the direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (Zero point sixty millimetre) thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing MS BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid seprately)

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleanin oil, grease, dirt and other foreign sand papering and knotting. Ready mixed paint brushing wood primer pink.

Painting two coats (Excluding priming coat) on new wood and wood bassed surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stoping with enamel paint other than white.

6mm thick cement plaster to ceiling in cement mortar 1:3 ( 1 cement : 3 sand).

15mm cement plaster in single coat on the rough side of brick / concrete /stone walls for interior plastering above floor two level to floor three level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand).-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Pointing on coursed or Ashlar stone masnory or concrete block walling in cement morter 1:3 (one cement: three sand) Flush pointing.-Above Plinth and upto floor two level .

Above floor two level upto floor three level .

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Distempering (two coats) with dry distemper of approved brand and manufacture and of required shade, on decorated ceiling and / or slopping roof surfaces to give an even shade after thoroughly brushing the surfaces clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papered smooth.

Wall painting (Two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matte and sand papered smooth including applying of putty a required for making the surface.

Providing plinth protection 50mm thick in cement concrete 1:3:6 ( one cement : three sand : six graded stone aggregate 20mm nominal size mechanically mix finishing surface of concrete smooth.

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated bed dry brick/stone aggregate 40mm (forty millimetre) nominal size) well rammed and consolidated and grouted with fine sand including preparation of ground.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm in cement mortar 1 : 6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size and 7.5cm cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm nominal size and finished with a floating coat of neat cement and curing complete as per standard design.

Construction of Roof Rain Water harvesting system-Excavation in foundation trenches etc in earth work lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear form the edge of the excavaion and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera , consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20metres in pick jumper work.

Stone soling under floor property hand pcked and consolidation by hand ramming complete

Providing and laying cement concrete 1:4:8 (1 Cement :4 Sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth

Providing form work ordinary timber/planking so as to give rough finish i/c centering shuttering and propping etc. complete.-Circular or curved in plan.

Providing mild steel reinforcement for RCC work including bending, binding and placing complete

RCC work in 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate 20 mm nominal size) i/c curring complete but excluding the cost of reinforcement and form work.

6 mm thick cement plaster in CM 1:3 i/c curring etc complete

P/F of net/jali in inlet pipe from gutter down pipe.

P/F of 10 Cm dia PVC inlet pipe from guter down pipe to tank.

Laying and fixing GI Pipe i/c trenching and refilling etc complete.-25 mm dia

20 mm dia pipe from tolu pump to PVC storage tank and connection to toilets.

15 mm dia pipe from PVC storage tank to toilets.

P/F of water tank etc. complete (500 ltrs)

P/f of float valve 25 mm dia brass in side of RWH tank.

P/F of tolu pump etc. complete.

Construction of Septic Tank-Excavation in foundation, trenches etc in earth work lift upto 1.50 meters stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layer when required into plinths, sides of foundation etc. consolidating each deposited laer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 meters in pick jumper work.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluing cost of centring and shuttering in foundation and plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to curses) with hard stones of aprove quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement: 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6: (1 cement: 6 sand)

Half brick masonry in cement plaster 1:4 in super structure i/c curing complete.

20 mm thick cement plaster 1:4 (1 cement: 4 sand) in respective ratio in rough sides of brick stones/concrete walls for plastering upto floor two level finished even and smoth including scaffolding.

Providing and laying cement concrete 1:2:4 (cement :2 sand :4 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering

Providing form work of ordinary timber/planking so as to give rough finish i/c centering shuttering and propping etc. complete.

Nukd steel reinforcement for RCC work i/c bending binding and placing in position complete.

RCC work in 1:2:4 (1 cement:2 sand: 4 graded stone aggregate 20 mm nominal size) i/c curring complete but excluding the cost of reinforcement and form work.

Boulder/brick pieces, gravel filling in soak pit.

Construction of manhole/inspection chamber in brick masonary in CM 1:5 in sides 60x60x60cm with CI cover masonry, excavation and foundation concrete 1:5:10 and inside plastering with CM 1:3 finished with a floating cost of neat cement, making channel in CC 1:2:4 neately complete as per standard design (excluding cost of material)

Providing and fixing high presure PVC socket plain bend ISI marked including fixing with approved adhesive etc complete (110 mm dia)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete (110 mm dia)

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete (110 mm dia)

Out House-Cutting in earth work and disposal of excavated earth upto a lead 20 mtr. (P&J) work.

Excavation in foundation trenches etc in earth work lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear form the edge of the excavaion and then returning the stacked soil in 15cm layers, when required in to plinths sides of foundations etcetera , consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20metres in pick jumper work.

Providing and laying cement concrete 1:6:12 (1Cement : 6 Sand : 12 graded stone aggregate 40mm nominal size) and curing complete exluding cost of centring and shuttering in foundation and plinth.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approve quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 ( 1 cement : 6 sand).

Providing form work ordinary timber planking so as give rough finish i/c centering and shuttring.(seismic bond) on plinth and Lintel level.

R.C.C. work 1:2:4 (1cement;2 Sand: and 4 graded stone 20 mm nominal size including curing complete but excluding cost of form work and reinforcement.

Providing tor mild steel/ tor steel reinforcement for R.C.C work including bending,binding and placing complete

Brick work using common burnt clay building bricks with rat trap bond in super structure in cement mortar 1:6 (one cement : six sand) second class bricks i) above plinth level upto floor two level .

Half brick masonry in cement mortar 1:4 in super structure i/c curing complete.

Wood work in frames of doors, windows and clcresting windows and other frames wrought framed and fixed in position in Its class deodar wood.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm diametre with prepainted limpet and rubber wasshers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+back coat of polyster of 5microns over 5 microns primer including fixing with screws prepainted iron J or L hooks,bolts and nuts 6mm dia meter and prepainted G.I limpet and bitumen washers complete with all accesories as reqired as per the direction of Engineer-in-charge.

Providing and fixing valley 60cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped mettalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted GI limpet and bitumen washers complete with all accesories as required as per the direction of Engineer-in-charge.

Providing eaves board 200mmx25mm thick i/c fixing in position complete.

Steel work welded in built up sections, trusses and frames work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (In trusses and trussed purlins in buildings)

In beams joists, channels, angles, tee, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and nail ( frame work and cover fillets to be paid for separately).-6 mm thick.

Excavationin earth work and filling in 15 cm layers in foundation and plinth i/c ramming, watering and consolidating up to a lead of 20 mtrs. And lift upto 1.50 mtr(Pick Work)

Stone soling under floor property hand packed and consolidation by hand ramming complete

White glazed tiles 6mm thick in flooring, Treads of steps and landing laid on a bed on a bed of 12mm thick cement mortar 1:3 (1cement : 3sand) finished with a flush pointing in white cement.

White glazed tiles 6mm thick in skriting, risers of steps and dado 12mm thick cement mortar 1:3 (1cement : 3sand) and joint with cement slurry.

15 mm thick Cement plaster 1:5 (cement :sand in respective ratio in rough sides of brick stones\concrete walls for plastering upto floor two level finished even and smooth including scaffolding .

Providing and fixing MS grill of requird pattern in wooden frames of windows etc. plain grill

Providing and fixing of panelled glazed or panelled glazed shutter for door and windows including black enamelled iron butt hinges with necessary screws 40 mm thick. (1st class deodar wood)

P/f wire gauge shutter using G.M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors &window. Including bright finish/black.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete-300x16mm

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc complete.-200x10mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etcetera complete.-100mm

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete.

P/F MS but hinges with necessary screws.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls. Priming coat with distemper primer.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting Ready mixed paint brushing with white lead for priming.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping with white enamel paint.

Provding under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) wall rammed and consolidated and grouted with fine sand including preparetion of ground.

Providing plinth protection 50mm thick with cement concrete 1:3:6 (1Cement : 3Sand : 6 graded stone aggregate 20mm nominal size)

DIWAN SINGH