Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-Finance | ₹1.2 Cr | L1 | Accepted-Finance Quoted 10 Percent Service Charge |
| 2 | L1₹1.2 CrAccepted-Finance | ₹1.2 Cr | L1 | Accepted-Finance Quoted 10 Percent Service Charge |
| 3 | L1₹1.2 CrAccepted-Finance | ₹1.2 Cr | L1 | Accepted-Finance Quoted 10 Percent Service Charge |
Tender Value
Refer Docs
Closing Date
10 Mar 2023, 10:30 amClosed
Kaushik Sharma
NERLDC GUWAHATI
DEPLOYMENT OF EX SERVICEMEN SECURITY GUARDS AT NERLDC OFFICE, GUWAHATI
2023_POSOC_742978_1
NERLDC/CnM/LTE-5/22-23
Limited
Manpower Supply
Works
600 days
NERLDC GUWAHATI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
28 Mar 2023
28 Feb 2023
11 Mar 2023
28 Feb 2023
10 Mar 2023
28 Feb 2023
28 Feb 2023 - 10 Mar 2023
Hiring of Security Services from DGR sponsored agency at NERLDC, Guwahati
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). 5.33.1 All works upto plinth level
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe
Extension of D.G. Exhaust pipe line by using 6-inch dia. MS Pipe and heavy class long radius bends of matching diameter along with necessary nut, bolt, washers and U-clamps etc thereon as required, welding to be done as per best engineering practice by following high standard welding procedure, complete in all respect finished with one primary followed by two secondary coats of heat resistant heatex paint. The upper most end to be bend and chamfered at 45 degree and to be closed by welding a wire mesh of mi. 10 gauge MS wire having 1-inch x 1-inch openings to stop entry of any bird into the pipeline.
Providing and fixing MS supporting structure at the horizontal position of the chimney, duly joined to each other to form a ladder type structure. Entire structure to be provided two coats of zinc chromate metal primer followed by two coats of weatherproof epoxy paint of appropriate shade in such manner that successive coat shall be applied only after fully drying of previous coat. (As per drawing)
Providing and fixing Thermal insulation of exhaust pipeline by LRB (light resin bonded) / mineral wool/ rockwool mattresses of thickness 50 mm x density of minimum120 kg/m3
Support for LRB / mineral wool/ rockwool with embedded chicken wire mesh, cladding by aluminium sheets, Including the bends/ flanges therein, by fixing appropriate size steel screws and washers; cladding to be done in such a manner and workmanship that it shall protect direct entry of rain water into the insulation done; workmanship of work should be good to ensure proper finishing having regular diameter of 10 inch all over (Providing of sectionalization point as per drawing)
Supply and installation of SS Flexible Bellows, suitable for 6" dia. pipe, complete with counter flanges, heat resitant gaskets, nuts-boltswashers etc., complete as required
Wall (U shape) clamp with necessary nut, bolts and washer etc. (wherever required) for total aluminium pipe structure including wall drilling
SHARDENDU SECURITY AGENCY
RABINDRA KUMAR SINGH SECURITY AGENCY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .