COMPREHENSIVE MAINT OTM ACCN OF ASC ECHS AND 311 FD HOSP UNDER ZONE B OF GE (A) AHMEDABAD

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : MAINT GRANT 2024-25 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy all as specified and directed by the Engineer-in Charge.

All as per item No 1.01 above but one coat of white wash on ceilings.

Ditto all as per item No 1.01 above but one coat of colours wash on walls.

Ditto all as per item No 1.01 above but one coat of oil bound distemper on walls.

Ditto all as per item No 1.01 above but one coat of cement based paint on walls.

Ditto all as per item No 1.01 above but two coat of cement based paint on walls.

Ditto all as per item No 1.01 above but two mm thick of wall care putty on wall.

M&L for preparation of old painted steel surface of any description in any position and location not otherwise described over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Ditto all as per item No 1.08 above but applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

M &L Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening to wall surface complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of interior plastic Emulsion and over and incl 1.5 mm average thick coat of wall care putty complete all as specified and as directed

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed

S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F mild steel angle iron work as in doors or gates or grill of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe290 (Gde-E-165) complete all as specified and as directed

S&F Mild steel butt hinges medium weight 100mm long complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F factory made solid PVC door, cup board shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a prelaminated PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & b PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail, lock rail & bottom rail panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specification & diagram/product drawing shown on ser page No 156 of SSR Part II complete all as specified and directed & directed

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm prelaminated PVC sheet reinforced with MS square tube all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete all as specified and directed and directed

S&F Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or Stainless steel wire stapples complete all as specified and directed.

S & F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S & F in repairs Sheet glass ordinary quality and glazing with oil putty in square n exe 0.5 sq m in each pane (Thickness in 3.00mm) complete all as specified and as directed

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed.

S & F M&L for Powder coated aluminium ventilator having frame of Section 57x52 ,Series -B 20535 and shutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). complete all as specifiedcomplete all as specified and as directed.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

S & F aluminium anodised partition wall in panels with aluminium frame and partitions of rectangular section of size 100 x 44 x 1.48mm thick fixed in position with 5.50 mm thick plain glass/ 12mm thick prelaminated particle board exterior grade all fixed with 0.70mm thick glazing beading and rubber gaskit including fixing on wall and floor with suitable size of steel chromium plated screw with rowl plug complete all as specified and directed

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over incl screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

M&L for Light shade vitrified ceramic tiles 10mm thick, (square or rectangular) polished,area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 all as Specified.

Ditto all as per item No 29 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete

M&L for Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick set and jointd in neat cement slurry and pointed in whie or coloured cement to match pigment over and including 10mm thick CM (1:4) backing coat Tiles shall be of grade B-III as per IS-13712 (1993) of First quality all as specified & directed

M&L for Non Skid ceramic coloured jointless tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18Sqm but n. exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified

All as per SI no. 1.40 but as in skirting including 10mm thick backing coat of tiles in CM(1:4) complete all as specified.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed

M&L machine cut Kota stone slab 20-25 mm thick as in flooring or trades of step or shelvesetc incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and as directed

M&L machine cut Kota stone slab 20-25 mm thick as in riser to step including 10 mm thick rendring in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and as directed

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types -Green Marble complete all as specified and as directed

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed.(Note : Corrugation colour and shape of sheet shall be approved by GE)

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws including neoprene and EPDM washers complete all as specified and directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed

S&F 6mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J- Type or cranked hooks bolts complete all as specified and as directed

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

M&L for 6mm thick AC plain building boards as in ceiling complete all as specified and directed.

S&F mild steel rolled sections as in framing for fixing boards in ceiling and the like fixed with angle cleats and connecting plates of grade Fe-410-S complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet and fixing at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

Dismantling timber scantling 40 sqcm & over in section framed in any position.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe410-W (Gde-E-250) quality A complete all as specified and as directed

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick work in CM1:6, finished even and fair.

M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all as specified and as directed

Supply only Integral waterproofing compound.

M&L for preparation of new surfaces of ceiling plastered/AC sheet and applying three coat of white wash complete all as specified

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper and a coat of primer all as specifed.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint on over one coat of primer on walls complete all as specified and as directed

M & L for treating Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified.

Providing and injecting chemical emulsion for Post structional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed

Removing of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed.

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in, levelling coarse complete all as speificed and directed

M&L for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint as per the makes complete all as specified and as directed

Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Dismanting of PVC water tanks or any description and at any position and removing to store/ removing from site.

(a) Exc 500 ltrs and n.exc 1000 ltrs capacity.

(b) Exc 250 ltrs and n.exc 500 ltrs capacity.

S & F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed

S & F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut.

S&F for 25 mm SS curtain rod with fixing bracket and knobs fixed in repairs complete all as specified and as directed

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete all as specified and as directed.

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe complete all as specified and as directed

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and as directed

S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S&F in repairs stop valves/angle valve fancy type cast copper alloy, chromium plated with long shank and cup for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device.

S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

S & F in repairs chromium plated soap dish complete all as specified.

S&F in repair CP brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed

S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed

S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S&F in repairs both side Pre- laminated pressed wood board 18/19 mm thick as in Cupboard sutter/shelve/drawer all as specified and as directed

Dismantling of fencing, wire mesh of any description and in any position complete all as specified and as directed

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) complete all as specified and as directed

Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil.

M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm nexc 15cm long dia of shank 11 to 15mm.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed.

Supply only chainlink fencing any size any type etc complete all as specified and directed.

S&F mild steel round bars of 10 mm dia as in line wire cut lengths, Hooking ends etc conforming to Fe- 410 - W (Gde E-250) quality A (For tying chain link fencing complete all as specified and directed

M&L for preparation of new untreated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping, benching, holdfast, fixing of fencing post above wall etc,finished even and smooth using extra cement incl necessary form work complete all as specified and as directed

M&L for Providing precast ce- ment concrete type B1 1:2:4(20mm graded aggregate) set in cement mortar 1:4 in columns, posts, boundary pillars, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed

S & F galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire staples or steel pins etc complete all as specified and as directed

M&L plain cement concrete 1:4:8, Type D-2 (using 40mm graded aggregates) as in foundations, filling and mass concrete etc complete all as specified & as directed

M&L brickwork with fly ash/AAC bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 by using old size bricks complete all as specified and as directed

M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement mixed with water proofing compound complete all as specified.( WPC measured separately)

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings(Post shall be measured separately) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise .

M&L for 100 mm thick PCC(1:4:8) type D2 using 40mm graded stone agg as in sub base finished even and rough complete all as specified and directed.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L for glossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment and , set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 all as specified.

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as complete all as specified and as directed

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and as directed

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked fixing accessories and sunken galvanized modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable galvanized steel box, plate with cover for mounting of switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following Mcomplete all as specified and as directed . - Note : Including Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith all as specified and directed.

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 4 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with with suitable galvanized steel box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall complete all as specified and as directed

S&F angle holder, insulated polycabonate body with back plate complete all as specified and as directed

S&F switch piano flush button single pole one way 6 amp complete all as specified and as directed

S&F switch piano flush button single pole one way 16 amp complete all as specified and as directed

S&F switch flush type, 6 amp, single pole, two way complete all as specified and as directed

S&F bell push, flush type, 6 amp 240 volts complete all as specified and as directed

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and as directed

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and as directed

S&F ceiling rose 3 plates polycarbonate body complete all as specified and as directed

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and as directed

M&L for modular point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting of same make of switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall fcomplete all as specified and as directed Note : Including Cutting chases,pinning in ,making good for facings where required and pointing the cement mortar 1:3 to ends or edges of landings,steps,cills,sun shades,shelves,lintels etc and cutting chases for concealed conduit wiring etc and making good ,cutting not exceeding 10cm grith all as specified and directed.

One light point controlled by one switch.

One fan point /Exhaust fan point controlled by one switch.

One light point controlled by two, two way switches.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for Modular point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 4 sqmm (Phase - R,Y,B, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover complete for one 16 amp socket outlet controlled by one switch on independent board including making good the wall surfaces with matching colour on wall complete all as specified and as directed

S&F modular switch one way 6 amp 1 module complete all as specified and as directed

S&F modular switch one way 16 amp 1 module complete all as specified and as directed

S&FModular switch 2 way 6A, 1 module complete all as specified and as directed

S&F modular bell push, 6 amp, 1 module complete all as specified and as directed

S&F door bell, Multi Music type AC, 240 volts, single pole complete all as specified and as directed

S&F modular socket 6/16 - 3 pin 2 module complete all as specified and as directed

S&F modular socket 6 amp 3 pin 2 module complete all as specified and as directed

S&F modular hum free electronic step fan regulator, 120 watt 2 module complete all as specified and as directed

S&F Modular Switch socket outlet multipurpose 3 pin, 15 amp and two pin, 5 amp controlled by one switch complete all as specified and as directed

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes complete all as specified and as directed

2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

Supply and Fix LED Batten 20 watt tube light fiiting complete with decorative type fitting 4 feet long with Light Linear with its bright light output at 120 lumen/watt give batten type complete including all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core 6500K ( fittings shall be fitted on two plastic square/round block. Note power factor should not be less than 0.90.CRI>85, Built in surge protection 4KV, operating voltage 140 to 300 V AC, IP 20 ingress protection. PF>0.9 complete all as specified and as directed

Supply and Fix in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W i.e 120 lumen/watt including LED tube 2 feet long of same make having inbuilt drivers, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core,6500K , PF>0.9. CRI>85, Built in surge protection 4KV, operating voltage 140 to 300 V AC, IP 20 ingress protection complete all as specified and as directed

S&F LED Lamp 9 watt, 230 volts, 180 lumen/watt complete all as specififed and directed.

S&F Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame complete all as specified and directed.

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete all as specified and as directed

Supply & Fixing for sheet metal enclosure MCB distribution board, double door with IP43 -IK09protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed

S & F Distribution board (ETPN)iron clad, double door with IP-54 1K-09 protection suitable for MCC TP as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete Including with one MCB TP 3 pole 415 Volts 63 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed (Outgoing MCB will be measured separately).

S&F tripple pole and neutral, powder coated, CRCA steel sheet Vertical bus bar distribution board (VTPN) constructed as per IEC-61439-3 , IP-54 IK-09 suitable for 4P MCCB incomer upto 125 amp, 4 way, 415 volts, degree of protection IP 43 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc complete all as specified and as directed

S&F in Wall LED light fitting including fixing arrangement on wall with suitable size of GI pipe bend into shape, clamps and nut & bolts for fitting capacity of LED 20 watt, with pressure diecast aluminum housing & polycarbonate having top opening seperate driver compartment with IP66 protection and impact resistance IK07 duly prewired connection complete all as specified and as directed

S&F MCCB 125A 4 Pole suitable for MCB DB complete all as specified and as directed

S&F LED wall washer aluminium soft rounded corners in rectangle shape and white colour of light in both the up and down directions IP 44 ratings for uses in interiors as well as exteriors complete with 7 Watt LED complete all as specified and as directed

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp.

Double pole 10 to 32 amp.

Double pole, 40 to 63 amp. Note for MCBs & MCB DBs:- MCBs & MCB DBs shall be of the same make.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and as directed

Taking down carefully aluminium or copper submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete all as specified and as directed

DMA PROJECTS

yesh construction