Tender For Supply and installation of 11/22 KV distribution Transformer HT/LT Terminal Protector and Supply of HT/LT Booting, Transformer Earthing, Sleeves (Conductor Cover), Bird Guard in Any Scheme for Transformers (Including Installation) of Rumla Sub-Division Under Valsad Rural Division.

-::- SCHEDULE-B -::-

The Rates inclusive of PF and Exclusive of GST

Item Code Item Unit FY 2024-25

Binding of messenger Conductor at with a

distance not more than 0.75 mtr with 6 turns

minimum on XLPE Cable with single strand

binding wire (including cost of binding wire)

Supply and Installation of 11/22 kV Distribution

Transformers HT Terminal protector (UV

2 9926000086 PER SET

Resistance) with using 95/120/150 sq.mm long

barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on 11/22 kV

Distribution Transformer with replacement of

bare conductor by HT ABC conductor (DO bottom

3 9926000087 side to transformer) after removal of PER SET

semiconductor by HT ABC (6 inch both side). HT

ABC to be supplied by DGVCL. (1Set = 3 Nos i.e.

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT Feeder Pole

Having 2000 mm Electrode Length as per the

Tender Specifications and Drawing. (All Materials

Will Be Supplied by Agency)

Supply, Installation, Testing and Commissioning of

Maintenance Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT Feeder Pole

Having 3000 mm Electrode Length as per the

Tender Specifications and Drawing. (All Materials

Will Be Supplied by Agency)

Supply and Installation of 25 X 3 mm GI Strip

having hot dip- galvanized-zinc coating of 80-100

microns without any joints or welding. Both the

end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving

separate earthing connections to

6 9926000090 (1) Neutral of the transformer Meter

(2) MS structures of the transformer center

(Approximately 25-meter GI strip per transformer

- as per requirement and instruction of Engineer

in- charge) (All Materials will be supplied by

Supply and Installation of uPVC standard make

Pipe of 1.25" diameter for covering GI strip with

UV protected Cable Ties of 550 X 7.6 mm size to

7 9926000092 bind with pole face (Approximately 25-meter Meter

uPVC pipe for GI strip covering per transformer

center -as per requirement and instruction of

Engineer in-charge.

Supply & fixing of up to 33 kV Conductor sleeve

for Busbar to Drop out Fuse and Drop out fuse to

8 9926000093 Transformer H.T. including Busbar (12 mm sleeve) Meter

as per technical specification. (All Materials will

be supplied by Agency)

Supply & fixing of up to 33 kV Conductor sleeve

for Busbar to Drop out Fuse and Drop out fuse to

10 9926000094 Transformer H.T. including Busbar (15 mm sleeve) Meter

as per technical specification. (All Materials will

be supplied by Agency)

Supply & fixing of Disc type Red Color FRP(Non-

flammable) material with Weather resistant, Non-

11 9926000095 conductive bird guard OD=300 MM, ID=33 MM, NO

Width =1.25 MM, one side cut from ID to OD. (All

Materials will be supplied by Agency)

Providing and fixing of LT Terminal protectors i.e.

Re-useable boot (LT Side 1.1 kV) including LT (1.1

kV) insulating taps. All live part at LT side shall be

covered with fixing of LT insulating taps.

13 Nylon Net around Transformer Center

13.1 9926000097 Nylon Net (12 * 15 ft) Per Net

13.2 9926000098 Nylon Dori Per TC

Labor charge for fitting Nylon Net (All fabricated

13.3 9926000099 material for fitting nylon net shall be provided by Per TC

1. DGVCL will provide key material like M.S.

materials, ABC/Bare conductors, SC/RSJ Poles,

Insulators, Fabricated materials etc. to the

contractor.2.All fabricated items shall be

fabricated as per DGVCL approved drawing and

by welding rods confirming to the relevant ISI

specification and as directed by Engineer in

charge.3.Necessary electricity connection for

fabricated items shall be provided by DGVCL on

payment of required charge for connection &

electricity bill of the same shall be paid by the

agency.4.All the rates are inclusive of PF and

Exclusive of GST applicable time to time.5.All steel

material are to be painted as below:(a) Scrubbing

of rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated

materials of RSJ/PSC poles is must.(b) Two coats

of approved ISI mark red oxide (primer) is to be

properly painted for the RSJ poles & steel

fabricated materials of RSJ/PSC poles. (c) Two

coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to

be properly painted on to the RSJ poles & steel

fabricated materials of RSJ/PSC poles.

Total of schedule B….

(+) _______%Above, (-) _______%Below, Rate to Rate….

Net Total of Schedule B:

Amount in Words: (Twenty lacs only)

1. Whatever Steel Material removed after replacement should be credited to Store.

2. The rates are inclusive of PF & Work Contract Tax & excluding of GST.

3. Contractor has to carry out work under Rumla Sub-Division under Valsad-Rural

4. DGVCL will provide 1ph & 3ph LT Ariel Bunch Cable 11/22kv HT ABC with necessary

accessories to the contractor.

5. The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor and to

provide service connections on ABC by insulated pierce connectors through service

connection box.

6. The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

1. DGVCL will provide key material like M.S. materials, ABC/Bare conductors, PSC/RSJ

Poles, Insulators, Fabricated materials etc. to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by welding

rods confirming to the relevant ISI specification and as directed by Engineer in charge.

3. Necessary electricity connection for fabricated items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid by the

4. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

5. All steel material is to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles &

steel fabricated materials of RSJ/PSC poles is must.

(b) Two coats of approved ISI mark red oxide (primer) are to be properly painted for

the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint)

are to be properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Executive Engineer (O&M)

Valsad Rural Division.