PROVN OF CERTAIN BR ITEMS IN P316 P317 EM ITEMS TO LAB FIT FENCE TO WALL NEAR 411 AND SPL REPAIRS TO P507 AT OL BARODA

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete.

Taking down cement plaster on brick or stone wall etc incl scrubbing down with water complete.

Dismantling Plain or corrugated steel sheeting, any gauge & thickness including Nainital or similar pattern roof coverings complete

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, complete.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete, brick masonary etc complete.

Dismantling fencing wire mesh, any type complete

Excavation in trenches, n exc 1.5m wide and n exc1.5 min depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5 m in depth and getting out in Soft/loose soil complete.

Returning, filling in of hard/dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed and depositing in soft/loose soil where directed complete.

M&L for PCC Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete, complete.

M&L Providing precast cement concrete louvres and jallies type B0 1:2:4 (using 12.5mm graded stone aggregate), 50mm thick (measured solid) set in CM 1:4, including all mouldings complete.

M&L for PCC 1:2:4 type B0 Using 12.5 mm graded stone aggregates of 25mm thick as in leveling course, finished surfaces even and rough to receive floor finish complete.

M&L for Virified Ceramic tiles 10 mm thick any type of shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete.

M&L for Virified Ceramic tiles 10 mm thick any type of shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat 10 mm thick in CM 1:3 complete.

M&L for non skid colour ceramic tile 7 to 8 mm thick area of each tile joint free exceeding 0.11 sqm but not exceeding 0.18sqm, as in floors etc set over and including of pigment matching to tile color & screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete. (Tile pattern and decoration shall be as suggested)

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set over and incl. high performence adhesive similar to manufactured by somani ezifix tile adhesive mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout similar to manufactured by somani ezy grout of pigment matching to tile color & 10 mm rendering for screed bed on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles complete. (Tile pattern and decoration shall be as suggested).

Taking down cupboard / cabinet shutters not exc. 1.00sqm and removing debris from site complete.

Taking down cupboard / cabinet shutters exc. 1.00sqm and removing debris from site complete.

Taking down Unsv wooden cabinet and removing debris from site complete.

Providing and fixing factory made 18mm (+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter, 18 mm (+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape and fixed with magnet catcher etc. all as per Manufacturers's directions & speciifcations etc. complete.

M&L for Continuous (Piano) hinges width of flap 30mm (when open), mild steel, bright finish or electro galvanised complete.

M&L for 40 mm dia, cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete.

Taking down and refixing in same opening shutters exc 1.00m but n.exc 2.00 m complete.

M&L for complete removal of old existing treatment completely by scrapping and or rubbing of wall surfaces and applying two coats of oil bound distemper over & incl. a coat of 3mm average thick wall care putty and Clearcolle on plastered surfaces, preparatory to distempering complete.

M&L for preparation old plastered surfaces of ceiling and applying a coat of white wash to match the existing surfaces complete.

M&L for preparation of new plastered wall surfaces & applying two coats of oil bound distemper over & including a coat of 3 mm average thick wall care putty and one coat of primer complete.

M&L for preparation new plastered surfaces of external wall and applying two coats cement base paint over a coat of alkali resistant primer complete.

M&L complete removal of existing treatment on wall surface and applying two coat of cement base paint over a coat of alkaline resistant primer after preparation of wall surface complete.

M&L for preparation of surfaces of old wooden surfaces of any description over 10cm in width or girth not otherwise described & apply One coat synthetic enamel paint complete.

M&L for 18 to 20mm thick marble of any shade (Green) as in floor, steps (in single piece), cooking platform, cills of window etc., laid over & incl. 15mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

S&F in replacement 15mm bore bib tap, fancy type, cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule complete.

S&F in replacement 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor complete.

S&F in repairs PVC (SWR) bends any radius 75 mm bore pipe complete.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete.

S&F 16 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land complete.

S&F 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete

M&L for Cutting chases for concealed pipe where required and pointing in CM 1:3 in brick wall for bore of pipe 15/20 mm & making good etc. complete.

S&F in replacement Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm including suitable waste coupling and waste pipe complete.

M&L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete

M&L Rendering in two layer on fair faces of brick work or concrete surfaces of wall 5mm thk in CM 1:4 mixed with WPC @ 3% by wt of cement & finished even and smooth without using extra cement over 10 mm thick rendering in CM 1:6 complete. Note: WPC will be measured and paid separately.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 & finished even and fair without using extra cement complete.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and finished even and smooth without using extra cement complete.

Supply only Internal water proofing compound complete.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.

M&L for Gl frame work for (605 x 605mm) seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete

M&L for Non asbestos fibre cement building boards 12 mm thick fixed or laid/ inserted to GI work with screws fixed in ceiling complete.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete.

M&L PCC 1:3:6 type C1 (using 20mm graded agg) as in coping incl use of form work (straight or curved) weathering Slightly rounded or chamfered angles and throating complete.

Taking down carefully existing unserviceable copper / aluminium point wiring (light, fan, socket or power point etc) with fittings/fixures such as switches sockets, ceiling rose, fan regulators, etc ( except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete.

M&L Point wiring using 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit 25mm dia with all accessories & Concealed in walls / roofs / floors / ceiling etc. and 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc including cutting of chases as required and making good all disturbed work to match the existing for One light / fan point controlled by one switch 5 Amps 1 way complete

All as per item No. 43 above but for One 3 pin socket outlet 5 Amps independent board.

All as per item No. 43 above but for One 3 pin socket outlet 5 Amps on the same board with other switch.

All as per item No. 43 above but for with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket.

S&F for switch piano flush type SP one way 6 Amp complete.

S&F for switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal complete.

S&F for Socket outlet 2 in 1 , 3 pin, 6 Amps flush type complete.

S&F for Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB of capacity 20Amps complete

S&F ceiling rose surface polycarbonate body three terminal complete.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. comlete.

S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete

S&F in replacement LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S&F in replacement Buzzer, Ding Dong AC. 230 volts, single pole complete.

M&L in replacement sub main wiring with two runs of 4 Sqmm FRLS single core PVC insulated insheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including rigid PVC conduit ISI Marked 25mm dia medium grade with all connected accessores & concealed in wall/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor and cutting of chases as required and making good all disturbed work to match the existing complete. Note : Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

S&F for wall mounted fan energy efficient 300mm plastic body sweep with pull cord 240 AC, 50 Hz, single phase with all accesseries and Taking down existing UNSV fan including all accessories and to be deposited in AGE E/M store yard complete. Note : Old unserviceable fan shall be deposited to AGE E/M store yard through RV.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades and frame and louvers incl. connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and cutting hole on existing wall to suit new size in existing hole & making good disturbed surfaces to match with existing and Taking down existing UNSV fan including all accessories and to be deposited in AGE E/M store yard complete. Note : Old unserviceable fan shall be deposited to AGE E/M store yard through RV.

S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor with all accessories including connecting up with three core flexible copper conductor cable of suitable size and Taking down existing UNSV ceiling fan including all accessories and to be deposited in AGE E/M store yard complete Note : Old unserviceable fan shall be deposited to AGE E/M store yard through RV.

S&F for switch socket combination 2 in 1, 6 amp flush type universal complete.

S&F in repairs sheet metal enclosures distribution board double door, TPN vertical suitable for fixing of Four pole MCCB as incommer & MCBs SP as out going and duly fitted with Bus bar, Neutral link, blanking plates etc & shall be included with one No MCCB, 4 pole, 415/430, 63 Amps Volt, fixed megnatic and thermal release, having rupturing capacity 16 KA on 415 V icu. Encloser & MCCB shall preferably of same make fixed on wall with all acessories complete. ( MCBs required for out going shall be measured and paid separately)

S&F in repairs sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 12 way 240 V with 200 amps rated bus bar fixed on wall with all acessories complete

S&F in repairs sheet metal enclosures double door for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories complete

S&F in repairs MCB single pole, rupturing capacity 10KA, 6 amps to 32 amps as ordered 240 Volts including connecting complete

S&F in repairs MCB Single pole and neutral (SPN), rupturing capacity 10KA, 240 V 63 amps as ordered complete.

M&L in repairs Earthing with galvanised steel earth plate electrode, 600x600x6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including testing on completion complete

Supply and install hi wall split AC units indoor / outdoor with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR with all fittings and accessories complete

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 04 KVA complete.

M&L for sand cushoning to cable with river sand & punning to provide required cover for UG cables complete

M&L brick protection cover to electric cable with sub class 'B' bricks laid dry and flat abutting each other with gap between adjascent not exceeding 10mm complete.

M&L for galvanized steel tube light Grade of 50mm dia protection of cable laid in floors, road crossing ducts with all necessary fittings and fittings complete.

Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVCtape armouredwith galvanised steel wire or tape and overall PVC sheathed 70sqmm 3.5 Core nominal cross section in service connections complete.

M&L for galvanized steel tubing light Grade of 50 mm dia protection of cable fixed to pole/walls with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete.

P K SHETH

M/S Badri Electicals

Dagli Engineers

M/s. RAMESH NARHARI VALEKAR

Pratik Enterprise