Renewal of service road of Bhoopauli main canal from Km. 0.280 to 0.900, Km. 7.940 to 15.200, Km.16.700 to 17.400, Km 23.200 to 24.300,Km. 30.100 to 31.000 and Km 31.400 to 33.000

Amount

WBM G-2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, MORD specific ations 405.2

WBM G-3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification (G-3) including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, MORD specific ations 405.3

Providing and applying primer coat with bitumen emulsion (MS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion (VG-10) using emulsion distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, by manual MORD specific. 508

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510

Brick edging on both side of road with first class brick 8 cm wide and 12 cm deep laid with mud mortar including all material,labour T&P etc complete

Road Marking with applied Thermoplastic compound with reflectorising glass on bituminous surface. Providing and laying of hot applied thermoplastic compound 2.50 mm thick including reflectorising glass bed @250gms per sqm area ,thickness off 2.50 mm is inclusive of surface applied glass beds as per IRC:35 The finished surface to be level,uniform and free from streaks and holes.

Earthwork in canal with manual compaction and dressing with all lead lift in all tyoe of soil including cost of all material labour T&P etc. complete.

M/S- JANARDAN CONSTRUCTION