Repair and Renovation of Existing Kisan Bhavan at Rehan under Jal Shakti Division, Fatehpur in District Kangra Himachal Pradesh

Amount

Excavation in foundation , trecnches etc., in all kinds of soil such as pickwork, jumper work blasting work,kankar moorum,singles including decomposed soft and hard rock,including chiselling wedging clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth and sides of foundation etc. consolidating each deposited layers by remming and watering and then disposing of all surplus earth complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Squarred rubble stone masonry coursed with hard stone of approved quality in foundation & plinth i/c racking out of joints in CM 1:6 with in all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 crushed stone aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in following items including carriage of material within all leads and lifts complete in all respect as per entire satisfaction as directed by the Engineer-in-charge.

Foundations footings, bases of columns and the like and mass concrete.

Columns, pillars, posts and struts upto floor two level complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Suspended floor,roofs, landing and shelve and their supports balconies beams,girders bressumers and centilevers upto floor two level complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level complete in all respect within all leads and lifts.

Lintels, Beams, girders, bressumers and cantilever upto floor two level complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring blow supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in following item including carriage of material complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Foundation, footings basis of columns etc. and mass concrete complete in all respect within all leads and lifts.

Flat surface such as soffits of suspended floors, roofs, landings and like floors etc. upto 200mm in thickness complete in all respect within all leads and lifts

Columns, pillars, posts and struts Square, rectangular or polygonal in plan complete in all respect within all leads and lifts.

Stair cases with sloping or stepped soffits excluding landing complete in all respect within all leads and lifts.

Beams, cantilever, girders and lintels complete in all respect within all leads and lifts.

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge (Tor steel).

Ist class brick work of 1st using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing wood work of 1st class deodar wood in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws 1st class deodar wood 40mm thick including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class deodar wood 40mm thick including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing of glazing in double glass unit (DGU) 6mm (Six Millimeter) toughned KT series and fixed window glass (outside) 12mm (twelve millimeter) air gap+ 5mm (five millimeter) clear toughned of equivalent technical values and the glass shall be without any glaws, bubbles scratches etc. complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Providing and fixing 100mm ( one hundred millimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as per direction and Satisfaction of Engineer-in-charge .

15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:6 including carriage of materiaL within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

6 mm cement plaster to ceiling in CM 1:3 (1Cement :3 Sand) complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

20mm Cement plaster in single coat on rough side of exterior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 including carriage of material in all leads & lifts complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material iwithin all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge . 20mm.thick(for stairs and top of kitchen shelf)

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco/ Johnson / Kajaria or equivalant 600x600mm/600x1200mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) ointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge (As per sample approved by Department)

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (600 x600mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement:3 sand) finished with flush pointing in white cement including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

White glazed tiles 9 mm thick in dado of toilets,corridores etcflooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.(size of tile=30x45cms)

Providing and fixing Mortice lock with lever latch for room doors(200 mm size Godrej/Link make) complete in all respect within all leads and lifts as per entire satisfaction as directed by the Engineer-in-charge.

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete. in all respect including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing bright finished aluminium handles for doors with screws etc. complete. in all respect including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing bright finished hard drawn stainless steel hooks and eyes complete in all respect including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge 150 mm

Providing and fixing 40x3mm flat iron hold fast 40 cm.long including fixing to frame with 10mm diameter bolts,nuts and wooden plug and embedding in cement concrete block 30x10x15cm of 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size)complete in all respect including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge (Gate)

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm ( four point five kilogram per square metre) including filling the joints with approved adhesive complete 100mm ( one hundred millimetre ) dia pipes complete as per specification asper direction of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals. (100mm dia pipes)

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete complete as per specification asper directions of Enginer - in - charge including carriage of materials with in all leads, lifts and other incidentals.

PVC Plain bend 100mm ( one hundred millimetre ) dia

PVC Plain Shoe 100mm ( one hundred millimetre ) dia

PVC Clamp 100mm ( one hundred millimetre ) dia

Providing and fixing GI clip in Metal ceiling system of 600 x 600 mm(six hundred x six hundred millimetre ) module which includes providing and fixing 'C' wall angle of size 20x30x20 mm ( twenty x thirty x twenty millimetre) made of 0.5 mm ( zero point five millimetre) thick prepainted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm( three hundred millimetre ) centre to centre , suspending the main C carrier if size 10x38x10mm ( ten x thirty eight x ten millimetre ) n made of G.I steel 0.7 mm ( zero point seven millimetre ) thick from the soffit with of soffit cleat 37x27x25 x 1.6 mm ( thirty seven x twenty seven x twenty five x one point six millimetre ) , rawl plugs of size 38x12mm ( thirty eight x twelve millimetre) and C carrier suspension clip and main carrier bracket at 1000mm ( one thousand millimetre ) c/c , Inverted triangle shaved spring tee height of 24mm ( twenty four millimetre ) and width of 34mm( thirty four millimetre ) made of G.I steel 0.45 mm( zero point forty five millimetre ) thick is then fixed to the main C carrier and in direction perpendicular to it at 600mm ( six hundred millimetre ) centers with help of suspension brackets , Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 ( one hundred twenty) gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with. GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm ( six hundred x six hundred and zero point five millimetre ) thick with 25 mm ( twenty five millimetre ) height, made of G I sheet having galvanizing of 100( one hundred ) gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 ( sixty)microns (minimum), including factory painted after bending. including carriage of materials with in all leads and lifts complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges.

Providing and fixing 0.63mm ( zero point sixty three millimetre ) thick sheet. 15 cm. ( fifteen centimetre ) wide 45 cm. ( forty five centimetre ) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm ( four x three millimetre ) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design in all respect as per direction and to the entire Satisfaction of Engineer-in-charge .

Providing and fixing stainless steel railings 304 grade for stairs and the like, top hand rail 50mm dia, balusters at alternative step 40x40mm sq.hollow pipe, 4 nos hoz. Rows of 20x20mm square pipe, all sections 14 gauge, duly polished at welded joints and finishings complete within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing 12mm thick and 100 mm wide palmet with 25mm diameter wooden curtain rod and brackets including fixing with 25x3mm M.S. flat 10 cm long and plugs etc. complete in all respect including carriage of material in all leads and lifts. complete to the entire satisfaction as directed by the Engineer-in-charge

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominalsize) complete in all respect including carriage of material in all leads and lifts (complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing 15 cm. wide 20cms deep overall semi circular plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of material in all leads & lifts.complete to the entire satisfaction as directed by the Engineer-in-charge

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand :10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts (complete to the entire satisfaction as directed by the Engineer-in-charge

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/ masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete complete in all respect including carriage of material in all leads & lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete in all respect including carriage of material in all leads & lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts.

Polishing two coats with PU.(polyurethene) sirca/Asian make polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect including carriage of material in all leads & lifts complete to the entire satisfaction as directed by the Engineer-in-charge

Applying one coat for wood preservetive on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter,sand papering and knotting complete in all respect including carriage of material in all leads & lifts complete to the entire satisfaction as directed by the Engineer-in-charge

. Applying sprit and stains any colour on new wood and wood based surfaces for preparing shade for polish. Complete sirca/Asian make complete to the entire satisfaction as directed by the Engineer-in-charge

Painting two coats (excluding priming coat) on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters complete including carriage of material in all leads & lifts Enamel white paint complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and fixing Plaster of Paris( P.O.P.) false ceilings duly suspended from RCC slabs, using GI mains and cross sections, angle "L" runners with walls , frame grid size will be 45x60 cms, fastened to slab with 8mm dia fasteners, using wire mesh 5x5mm grid, 1mm dia wire fixed with screws on GI frame work, then applying 12 mm.finishing layer of POP, complete. complete to the entire satisfaction as directed by the Engineer-in-charge

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks complete in all respect including carriage of material in all leads & lifts complete to the entire satisfaction as directed by the Engineer-in-charge .

False ceiling work under the frame of CGI sheet roof with ACP sheets of approved brand and shade including the cost of the frame work to hold the False ceiling like Suspenders , perimeters and all necessary channels as per direction and to the entire satisfaction as directed by the Engineer-in-charge .

Providing and fixing 12mm (twelve millimetre) thick High Pressure Laminate (HPL) cladding of approved shape and texture of unistone or its equivalent made from portland cement alkally resistance glass fibres, UV resistant synthetic inoraganic pigment combined with the range of chemical additives on exterior surface side as on faces of Arch masonry walls etc. 12mm (twelve millimetre) thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry including scaffolding etc as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. upto Floor any Level complete to the entire satisfaction as directed by the Engineer-in-charge

ELECTRICAL ITEMS:- Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. complete to the entire satisfaction as directed by the Engineer-in-charge

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required complete in all respect within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing wire from MCB box to main pannel board within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Bell push, Modular.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

S.P. 15/ 16 Amps one way Modular switch

6 pin,15/16 Amps Modular socket outlet.

Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required. within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 100 Amp. Category-A within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:-within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required:- within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required.within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 200 Amp. Category-A within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run) within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run) within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, Armoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A) within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Havells, AO Smth, Recold, Bajaj, Crompton & Orient make).

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Havells, Crompton, Usha, Orient & Jones make).

Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Havells, Crompton, Usha Orient & Bajaj make).

Providing and fixing 1x36 watt-LED (Category-A) surface mounting fixture Syska/Havells make within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing 6 watt. Recessed down lights round shape for falce ceilings complete within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A) within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing, Installation, testing and commissioning of tube fitting 1x20W LED coplete in all respect. within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing Mirror light 60 cms long 6 watt LED fixture within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing 9 watt.LED bulbs within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing bakelite batten/angle holder including connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing of integral LED. Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - CFL 26 watt within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing of integral LED BOUNDARY WALL lights fixed over GI pipe polls 1.20mtr ht. 50 mm dia,9 watt LED lamp with 200 mm dia globe made of acrylic sheet complete within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Supplying and fixing 12 unit intercome exchange with phone sets and wiring complete v

Supplying and fixing of split type air conditioner Blue star/LG/ Onida Whirlpool/Lloyd/ Samsang make having two stars features auto clean filter four wayu swing all copper pipes including making provision of draining of back moisture water through GI pipe 20mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

1.50 Tonne capacity

2.00 Tonne Capacity

SANITARY/WATER SUPPLY ITEMS Providing and fixing high pressure PVC.spigot and socket waste ventilating pipe of following daimeter i/c entire carriage of material within all leads and lifts.minimum 6 kg pressure within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

75mm dia

100mm dia

Providing and fixing PVC plain bend of following diameter i/c entire carriage of material within all leads and lifts within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

75mm dia

100mm dia

Providing and fixing PVC door bend of following diameter i/c entire carriage of material within all leads and lifts within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

75mm dia

100mm dia

Providing and fixing PVC collar/ socket of following diameter i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

75mm dia

100mm dia

Providing and fixing PVC Single equal brach of following diameter i/c entire carriage of material within all leads and lifts within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

75mm dia

100mm dia

Providing and fixing PVC Single equal brach with eval access of following diameter i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

75mm dia

100mm dia

Providing and fixing PVC Floor traps 110x75mm i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

Providing and fixing viterous China wash down water closet (European Type WC pan) with intergral “P”or”S” trap including jointing the trap with PVC soil pipe ,including cistern and seat cover) including entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Single piece WC .300 mm wall distance Jaquar/Cera, Hindware & ParryWax make.

Providing and fixing vitreous china wash basin with single hole mixture with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting i/c entire carriage of material within all leads and lifts. Cera /Hindware/Jaquar make Concord, 630x450mm size. and to the entire satisfaction of Engineer-In-Charge

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fitting i/c entire carriage of material within all leads and liftsand to the entire satisfaction of Engineer-In-Charge. (Hindware, Parry wax, Cera & Jaquar make).

Providing and fixing of MI union for wash basin 32mm dia i/c carriage of material within all leads and lifts.and to the entire satisfaction of Engineer-In-Charge

Providing and fixing 32mm dia PVC waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Supxme, Ashirvad, Finolex and Prince make).

Providing and fixing 900x600 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Himans, Seven Horse and Aina make).

Providing and fixing C.P. brass towel rail complete with C.P.brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 x 20mm. Jaquar make and to the entire satisfaction of Engineer-In-Charge

Providing and fixing 600x120mm glass shelf i/c entire carriage of material within all leads and lifts.Jaquar make and to the entire satisfaction of Engineer-In-Charge

Providing and fixing CP toilet paper holder common and VIP toilet i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing CP brass soap dish i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing Tooth brush and tumbler holder i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing CP brass shower 300mm dia and 60 cms long rod i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Jaquar, Kholu, Hindware make).

Providing and fixing brass bib tap long nose 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.(Kitchen sink) and to the entire satisfaction of Engineer-In-Charge. (Jaquar, Kholu, Hindware & parry ware make).

Providing and fixing CP brass wall mixture for bathing area and to the entire satisfaction of Engineer-In-Charge

Providing and fixing CP brass angle valve 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Jaquar, Kholu, Hindware & parry ware make).

Providing and fixing CP concealed stop cock 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge. (Jaquar, Kholu, & parry ware make).

Providing and fixing single hole single lever wash basin mixture i/c entire carriage of material within all leads and lifts.Jaquar make and to the entire satisfaction of Engineer-In-Charge. (Jaquar, Kholu, & parry ware make).

Providing and fixing PVC connection 15mm dia i/c entire carriage of material within all leads and lifts.and to the entire satisfaction of Engineer-In-Charge

Providing and fixing 100mm dia, C.P. brass grating including carriage of material within all leads and lifts.and to the entire satisfaction of Engineer-In-Charge

Providing and fixing Health facut (hand shower) fixed for WC seat i/c entire carriage of material within all leads and lifts.and to the entire satisfaction of Engineer-In-Charge.(Jaquar, Kholu, & parry ware make).

Providing and fixing CP towel ring i/c entire carriage of material within all leads and lifts.and to the entire satisfaction of Engineer-In-Charge

Providing and fixing CP towel rack 600x250mm for VIP toilet i/c entire carriage of material within all leads and lifts.for vip rooms and to the entire satisfaction of Engineer-In-Charge

Providing and fixing wall to ceiling and floor galvanised mild steel tubes light grade), tube fittings and clamps i/c making good wall ceiling & floor of following diameter i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge (Tata & Jindal make)

15mm dia

20mm dia(all toilets internal pipes and fittings) (Tata & Jindal make)

25mm(from tank to toilets etc) (Tata & Jindal make)

Providing & fixing Brass full way ball/handel type wheel valve i/c entire carriage of material within all leads & lifts and to the entire satisfaction of Engineer-In-Charge. Reputed Make

15mm dia

20mm dia

25mm dia

Providing and fixing 115x50x25cms size double bowl of approved make stainless steel kitchen sink i/c entire carriage of material within all leads and lifts and to the entire satisfaction of Engineer-In-Charge

Providing and fixing 1000 ltrs. Double layer Vectus make water storage reservoir or 4 layers with top lid and making connection complete in all respect including all leads and lefts and to the entire satisfaction of Engineer-In-Charge

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 ( 1cement:4sand :8graded stone aggregate 20 mm nominal size),inside plastering 15 mm thick with cement mortor 1:3 (1cement:3sand),finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size) finished smooth complete i/c curing &testing. (i) inside size 1200 x 900 x 1000 mm deep i/c c.i. cover with frame (m. duty) with single pattern 455 x 610 mm internal dimensions (total wt.of cover & frame to be not less than 38 kg) 23 cms. thick brick masonry walls using 2nd class brick in cm 1:3 (icement : 3 sand) and to the entire satisfaction of Engineer-In-Charge

Providing & fixing stone ware gully trap grade 'A' complete with CI grating,B/Masonry chamber in cement mortor 1:5 & water tight CI cover with frame of 300 mm x 300 mm size (inside) .The wt.of cover to be not less than 4.53 Kg & frame to be not less 2.72 Kg. (Square mouth traps 100 x 100 mm size) and to the entire satisfaction of Engineer-In-Charge

RANBIR SINGH

nitish gov cont

Chamunda Construction Company

Sarbjit Singh Katoch