LAC ADS Kollam 2023 24 Construction of drain and Beautification works near Vadakkekara Sangakadavu Boat jetty in Thrikkaruva panchayath in Kollam LACGeneral Civil Work

Amount

Beautification

OD16998/2024-2025:Providing and fixing Granite stone benches ( sofa )150x45x90 cm with ornamental work as per Architects design with chiselled and all materials, all labour charges etc. complete for installing on walkway of boat terminal

OD16999/2024-2025:Supply and erection of Decorative tubular stainless steel pole having 5 mtr height, 3 inch outer dia made from min. 2mm thick plate.

OD17000/2024-2025:Supply, conveyance, installation, testing and commissioning of 30W Integrated Solar LED light fitting with all accessories. Each unit should include 18V,75W panel with Grade A solar cells, 24Ah, 12.8V LiFePO4 type battery, Luminaire housing component to be Aluminium alloy with powder paint, IP65, LED chip shall be Philips/Osram, THD <10%, efficiency greater than 85%,3800-4500 lumens,etc. as required with 5years warranty . Luminaire shall be suitable for mounting at a height of 5-6m, should have 24hrs autonomy, PIR sensor for better efficient lighting. (Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65)

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.

60.7.2:DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

16.91.2:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.9.2:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

OD23472/2024-2025:RR with Departmental. Stone - Random rubble masonry using departmental rubble in foundation and plinth including through and bond stone upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand).

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.23:Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

16.84:Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)

13.66.1:Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work

OD23996/2024-2025: Solar powered CCTV installation Including all Components and Integration of Unit. - Supply, installation and integration of Solar powered CCTV with Hikvision 5 MP Bullet Camera with 40meter Range – 3 nos, Hikvision DVR – 4 Channel, Upto 8 MP – 1nos,SMPS – 10 amps Rated, Co-axial Cable for Camera Output, Hard Disk, CCTV grade , 2 TB, (WD/Thoshiba Brand),BNC Connector, 6 nos,DC Pin , Camera Power Supply, 3 nos, Camera Mount, 4 nos – 3 nos for Camera and 1 nos for wire Junction, Conduits – Toms, Ivory medium 20 mm , 30nos, Structure Fabrication with Materials ( for Solar Panels, and CCTV Camera) – Rain guard included, Solar panel – 400 watts – 1 nos, Charge Controller – 10 amps rated and DCto AC converter 200 W, 1 sq.mm DC cable for power delivery, Dual Pole Isolator for Battery Power 1 nos, Solar Battery – 120 Ah (solar tubular battery) , Stainless steel Poles for Camera, Solar Panel and Battery Stand, Earthing for Solar Pole-1 nos, with 10 swg copper with earthing Rode, including all charges and CCTV integration complete. The cameras to be setup as watching eachother on 2 poles on either end of the walkway 40 m long. The rate shall be inclusive of Solar Panels, Battery, Charge Controller and Other commodities related for Solar CTTV System, Shipping and other costs for the Solar Power CCTV Components, Base structure fabrication and Pole Erection,Earthing for Solar Pole and CCTV Integration and Demo etc complete. The warranty details shall be :- Solar Panels - 25 years including 10 years on against manufacturing defects and 15 years on against performance , CCTV Modules (DVR, Camera) – 2 years Service Warranty, Power supply Module (SMPS for Camera, Power supply Adapter for Camera and Dc to Ac Converter) – 6 months replacement warranty.

6.2.2:Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

16.85:Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand), including making joints with or without grooves ( thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment) . (Old kerb stones shall be supplied by the department free of cost)

16.82:Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

drain

3.29:Construction of an underground drain at Edge of Pavement 1 m x 1 m (inside dimensions) lined with RCC-20 cm thick and covered with RCC slab10 cm in thickness on urban roads.

13.10:Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.

15.6:Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching.

8.1.A:Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC Using Concrete Mixer on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409

11.9:Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year

11.7.A:Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart.

11.2.2:Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed <br> In rows 7.5 cm apart in either direction

Bidder Name

AKHIL CHANDRAN