CERTAIN REPAIR TO ROOF FLOOR HARDSTANDING AND DRAIN ETC OF MT COLONY AND CR CAMP UNDER AGE BR I AT IMA DEHRADUN

Amount

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed.

Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in CM (1:4) complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

Supply only liquid water proofing compound complete all as specified & directed.

75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

100 mm thick PCC 1:2:4 (20mm graded crushed stone aggregate) as in floor/hard standings and making impressions with spike rolling or expanded metal whilst the concrete is green, finishing exposed edges fair or rounding or chamfering of exposed edges also filling in uneven surfaces to make it level including making joints 12mm wide to the full depth of PCC at panel size n, exc 2.0mx 2.0m and filling the same with sealing compound grade 'A' including necessary formwork including demolition of existing old cement concrete floor etc complete all as specified and directed.

40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

Glass dividing strips 3mm thick and 38mm wide inserted in position and confirm to design complete all as directed.

PCC 1;4;8 type D-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

25mm thick Fiber reinforced heavy duty cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.Make -Ultra/Unistone

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel not ex 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping, benching, holdfast etc including weathering sliglitely rounded or chamfered including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed.

Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. Make: Zoloto/Leader/Kirloskar/Upadhyay/Audco

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repair complete all as directed.

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm fixed in repair complete all as specified and directed. Make :- Make:- Prayag Cat part No.1216DM or equivalent in Blue star/Nirali.

Stainless steel plate rack of size 31 inch X 36 inch X 10 inch fixed in repair complete all as directed. Make :- Make:- Prayag Cat part No.P-348 or equivalent in Blue star/Nirali.

Brass chromium plated towel rail 600mm long fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

Grating dome 125 mm of PTMT (Min weight 40 gm) fixed in repair Complete all as specified and directed.

Overhead shower round shape 100mm dia round shape singlei flow (ABS body chrome plated with grey face plate) with with rubit cleaning system with including 115 mm long shower arm fixed in repair complete all as directed. Make:-ESSCO (Jaquar) Cat No. EOS-542N or equivalent of make Cera/Hindware

15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-511KN or equivalent of Cera/Hindware

15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair. (Minimum weight 15mm-90gms/20mm125gms). complete all as specified and directed.

15mm bore stop valves Male/Female end chromium plated fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-513BKN/513/ AKN or equivalent of Cera/Hindware

Chromium plated pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make- ESSCO (Jaquar) SQT-507KN or equivalent make of cera/Hindware

15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repair complete all as specified and directed. Make: ESSCO (Jaquar) cat No.SQT-514AKN or equivalent of Make cera/Hindware

Chromium plated basin inlet connection (angles valve) 15mm dia screwed for iron pipe or brass ferrule, fixed in repair complete all as specified and directed. Make: ESSCO (Jaquar) cat No.SOT-526KN or equivalent of Make cera/Hindware

PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed in repair complete all as specified and directed.

40 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed in repair complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28mm with plastic ring of ABS plastic of dia 56 to 58mm, a pair of brackets, fixed in repair complete all as specified and directed.

Decorative finals ABS plastic in matching colour of steel powder quoted paint of same colour of rod, fixed in repairs complete all as directed.

Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as directed.

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.

2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of Green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m hig

Prepration of scrapped surface of wall / ceilling and applying 2mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed. (work to be carried upto a height of 7.5m).

Preparation of new puttyied surfaces of wall/ceiling and applying one coat of primer complete all as specified and directed.(work to be carried upto a height of 7.5m).

Prepration of primed surfaces of wall / ceiling and applying two coats of Appex paint ( Weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m) .

Prepration of primed surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete all as directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed.

Preparation of old plastered surfaces of wall ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Cement based paint complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Removing /cutting trees vegetation, digging out roots filling holes on building wall/roof/cajja etc and making good with cement mortar 1:3 or cement concrete 1:2:4 type B-1 including removal of material to a distance exc 250m not exc 500m complete all as specified and directed.

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates including dismantling existing MS work complete all as specified and directed.

Fibre 2mm thick glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall including L type, J type or cranked hook bolts in lieu of screw etc fixed in repair complete all as specified and directed

Factory made precast cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone agg solid blocks (size (450x300 and thickness 150 mm at bottom and chamfered to 100m at top as in kerb stone set and jointed in CM 1:4 incl excavation and earth work, removal etc including demolition/dismantling of cement concrete/concrete blocks/kerb stones etc of any description in ground floors complete all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Preparation of new or previously untreated concrete/plastered surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating complete all as specified and directed (work to be carried upto a height of 7.5m)

Taking down existing broken portion of upward / inverted facia or roof slab or visible concrete rienorcement of any thickness and surface area exc 0.5 sqm but not exc 5.0 sqm and providing cement concrete (1:2:4) type B-1 using 12.5 mm granded stone agg including finishing the surface by providing 10mm thick rendering in CM 1:3 and finish the surface smooth using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating all as specified and directed (work to be carried upto a height of 7.5m) .

Alankar Traders

JAIN BUILDERS

M/s RK ENTERPRISES

Meher enterprises

Makin Developers and Associates

M/S Anil kumar