REPAIR TO INTERNAL WATER SUPPLY, CLEANING OF WATER TANKS AND PERIODICAL SERVICES AT AFS JODHPUR UNDER AGE B/R-II, GE (AF) NO 2 JODHPUR

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, concrete in sunken floor above ground floors) including roof treatment and removing from site all as specified and directed.

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and com[plete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and complete all as specified

Wire brushing and cleaning top surfaces of tarrace or cement concrete including flashing and junction of parapets

M&L 10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement.(NOTE:- Water proofing compound shall be measured and paid seperately)

M/L for cement concrete B-0. 1:2:4 (12.5mm graded aggregate) in padding finishing surface of concrete topping even and fair without using extra cement all as specified of average thickness 25 mm in slop 1:40 over roof

M&L for one coat of applied cold bituminous primer @ 1.2 kg/Sqm shall be applied on plastered surfaces including side wall all as specified and directed.

M/L APP modified membrane minium weighting 3 Kg/Sqm with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not less than 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6.

All as per item No. 9.00 above but on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6

M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

M& L for 10mm thick rendering on stone masonary in CM 1:4 on walls using integral water proofing compound @ 3% weight of cement , finished even and smooth without using extra cement and all as specified.(NOTE;- Water profing compound shall be measured and paid seperately)

M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement.

Supply only integral water proofing compound ISI Marked.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.

M&L for complete removal of old treatment by mechanical means from walls and applying one coat of acrylic two coats of wall putty and sanding and applying two coats of oil bound destemper white or tinted by pump roller applicator as directed.

M&L for preparation of old plastered and un plastrered surfaces of walls and applying two coat of oil bound distemper white or tinted including removing existing nails if any nos filling the disturbed surface/ holes making good smooth surface as directed.

M&L for preparation, of removing/scrapping down existing surface where ever necessary of old plastered or unplastered surfaces of walls and applying one coat(finished coat) of oil bound distemper (OBD) white or tinted over one coat 1mm thick wall care putty removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids to achive the smooth surface as directed by Engr-in-charge

M&L for complete removing/scrapping down existing surface of old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coat of plastic emulsion paint over a coat of alkali resistant primer, as directed by Engr-in-Charge

Preparing old surfaces plastered or unplastered surface of wall by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and trading oil and greasy spots washing rubbing down and stopping of previously untreated /painted surface and M&L for applying one coat of (finishing coat) of cement base paint in diffrant tint/shade as approved by Engineer-in-charge Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old painted wooden surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete.

M&L for preparation of old painted steel surface of any description not otherwise provided over 10 cm width or girth and applying one coats of synthetic enamel paint and complete.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 250 liters and not exc. 500 liters complete all as specified and as directed.

Cleaning and removing all scale dirt etc. from water storage tanks and from mouth of circulating pipes etc. and writing the date of cleaning and next due date for cleaning of tank, capacity of tanks exc. 500 liters and not exc. 1000 liters complete all as specified and as directed.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repairs vitreous- China wash down water closet Squatting pan ( Orissa Pattern) size 580 x 440 mm including flush pipe , PVC P-trap and PCC for fixing complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets.

M&L in repairs vitreous china wash basin, (flat back or angle back type) any size including cutting for and pinning in ends of brackets or erecting stand, including provision of brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repairs 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

S&F in repairs 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.)

S&F in repairs PVC flush bend pipe for PVC 10 litre flushing cistern for EWC/IWC all as directed by Engineer-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.

S & F in repairs brass waste coupling of 32 mm dia for WHB all as specified and as directed

S & F PVC waste pipe 32mm bore of suitable length for WHB/Urinsl/sink complete all as specified and as directed

S&F in repair CP soap dish, fixed to plugs with chromium plated screws and all as specified.

S&F in repair CP tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and all as specified

S&F in repair CP grating 100 mm dia all as specified and as directed.

S&F Single mirror bath room cabinet moulded body and frame (made of strong and fine quality A.B.S plastic) with hinged door (size 16"x12"6") white/ivory in colour.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

S & F sinks with drainage boards made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes,including bedding in cement mortar o to dwarf wall or including fixing cantilver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 15 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 20 mm.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store yard of bore 25 mm.

S & F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S & F 25 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors all as specified and directed.

S&F in repair stop/gate valves/angle valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle for 15mm bore.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20 mm dia.

S&F in repair 15mm bib taps cast copper alloy CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair 15mm Pillar taps cast copper alloy, capstan heads CP Fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrule.

S&F in repair Brass chromium plated shower rose 125mm size

Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capcity and removing from site complete as directed by Engr -in-charge.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball PTMT. valve high pressure with polythyne float and flynut complete in repair.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 100 mm dia

S&F 75 mm bore UPVC (SWR) pipes type ‘A’, single socketed, in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) door bends 110 mm dia with acess door

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm with acess door

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls.

S&F PVC (SWR), junction single, (Single T) with acess door 110 mm dia equal or unequal

S&F PVC (SWR) door bends 110 mm dia with acess door.

S&F PVC (SWR) door bends 75 mm dia with acess door.

S&F stack clamps out of 50mm by 5 mm flat iron & 16mm dia mild steel iron stay incl bolt & nuts & securing ends of stays to walls for 100mm pipe.

S&F PVC (SWR) floor trap with garting of outlet dia 75mm incl jointing with solvent cement

Resecuring or easing & adjusting without taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each.

S& F in repairs for 18/19 mm thick prelaminated article board, interior grade, pelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S&F in repairs 40 mm dia cupboard knobs of fixed with nut, screw and washer of mild steel, bright finished.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm.

S&F plain white 18mm thick PVC sheet/board of required size in cupboards and in similar works includingbrackets/bolts for fixing. The panels shall be fabricated using adhesive and screws where required .All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed.

S&F cupboard shutters of required sizes at site made out of 18 mm thick one siode decorative teak face finish consisting of 18mm thick PVC sheet/board including all necessary fittings and fixtures like handles, hinges, locking devices, magnetic catches etc. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.5 Sqm and n exc 4.00 sqm each of any description incl making good the disturbed surfaces complete all as spd and as directed.

M&L for 2nd class hard wood as in plain solid staight chowkats and frames wrought framed rebated on the solid rounded or chamfered put to gather with glue pinned at joints complete all as specified.

Pressed steel frames of size 105x60mm thickness 1.25mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified.

Pressed steel frames of size 125x60mm thickness 1.25mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified.

S&F framed work such as grills gratings etc with ends of bars shoulders and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar works conforming to Fe 290 gde E-165.

M&L for plain cement concrete type B-1 (1:2:4) using 20mm graded cruhed stone agg as in seismic and other similar bands shelves coping bed plates hold fasts plinth courses filling in pressed steel frame and the like finished fair and even incl necessary from work complete all as specified & directed.

S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated.

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of doors shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats . Note: Glazed or clothetc in panelsor sash square shall be measured seperately

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of window shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats. Note: Glazed or clothetc in panelsor sash square shall be measured seperately

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for preparation of New wooden surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

M&L for preparation of new steel surface of any description not otherwise provided over 10 cm width or girth and applying two coats of synthetic enamel paint and complete.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 125mm.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size

S&F Aluminium anodised barrel tower bolt of extruded section 200mm size

S&F Butt hinges medium weight cold rolled mild steel of size 100mm.

S&F Butt hinges medium weight cold rolled mild steel of size 125mm.

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 125 mm.

S&F in repairs extructed aluminium alloy handles, fabricated type,anodised of size 150 mm.

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 150mm size

S&F in repairs Aluminium anodised barrel tower bolt of extruded section 200mm size

S&F in repairs Butt hinges medium weight cold rolled mild steel of size 100mm.

S&F in repairs Butt hinges, medium weight cold rolled mild steel of size 125 mm.

S&F in repairs drapery rod in any length, high strength MS pipe with powder coated extrusion having outer dia 28 mm all as directed by Engineer-in-Charge.

S&F in repairs decorative MS powder coated end cap for curtain rod matching colour of steel powder quoted paint of same colour of rod or as directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm all as specified and directed by Engr-in-charge

S&F in repairs floor door stopper, with 150 mm long of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

S&F in repairs 200 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F in repair MS peg set with 3 to 5 hooks fixed to doors/wall with screws.

S&F in solid rubber beading of 30 to 50 mm wide and 3 to 5 mm thick fixing at bottom to existing doors all as directed by Engineer-in-Charge.

S&F in repairs box type hinges of steel window/ventilator, 75/100 mm long including necessary fixing & welding work etc complete all as directed by Engr-in-charge.

S&F in repairs peg stay 250 mm/300 mm long stopping of steel window/ventilators including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repairs left/right MS handle of steel windows including welding(if required) & fixing complete all as directed by Engr-in-charge.

S&F in repair MS 300 mm , ordinary rat tail rod pattern springs including rooler and roller plate complete all as specified.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each paneand complete all as specified.

S&F in repairs for stainless steel kitchen plate rack size-31x30x10 inch and complete all as directed by Engr-in-charge

S&F in repairs for center hole basin mixer without popup waste system and complete all as directed by Engr-in-charge

S&F in repairs for sink mixer with regular spout w/m and complete all as directed by Engr-in-charge

S&F in repairs for CP single lever sink mixer with regular spout w/m , and complete all as directed by Engr-in-charge

CHOUDHARY CONSTRUCTION CO