BID DOCUMENTS FOR RENOVATION OF EXISTING 8.50 MLD WATER TREATMENT PLANT AT POWER HOUSE WATER WORKS, CONSTRUCTION OF SECURITY CABIN, CC ROAD AND COMPOUND WALL PAINTING AT UMARGAM. DIST VALSAD.

Total Amount Rs.

Item Qty. Description Total Unit Amount

1 3102.00 Removing dry or oil bound distemper by washing and

Smt. scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete. For

Outside & Inside. 11.30 Smt.

2 310.50 Removing and scraping of old detroited plaster of any

Smt. thickness from wall/rcc member including stacking of

serviciable material and disposal of unserviciable from site of

work with all lead and lift.

3 85.50 Painting Two coats (Including priming coat) on previously

Smt. printed steel and other metal surface with synthetic enamel

paint, brushing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

4 55.50 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick walls for interior plastering

upto floor two level and finished even smooth in cement

mortar 1:4 (1 cement : 4 sand) with floating coat of neat

5 9.00 Providing 10mm thick cement plaster in single coat on

Smt. ceilings and soffits of stairs for interior plastering and finished

even and smooth in. Cement Mortar 1:4 ( 1 Cement :

Sand) and finishing with a floating coat of neat cement slurry

for above floor two level.

6 13.50 Providing 20mm thick sand faced cement plaster on wall up

Smt. to height 10 metres above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1 Cement ; 3 Sand) and 8mm

thick finishing coat of C.M. 1:1 (1 Cement : 1 Sand) etc.

Item Qty. Description Total Unit Amount

7 2205.00 Distempeing (Three coats) with oil bound washable

Smt. distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade, over

and including a priming coat with alkali resistance primer of

approved brand after thoroughly brushing the surface and

other foreign matter and also including preparing the surface

even and sand parpered smooth. 100.55 Smt.

8 358.00 Distempeing (Three coats) with oil bound washable

Smt. distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade, over

and including a priming coat with alkali resistance primer of

approved brand after thoroughly brushing the surface and

other foreign matter and also including preparing the surface

even and sand parpered smooth. on Ceiling & Sloping Roofs.

9 539.00 Finishing wall with weather proof exterior emulsion paint on

Smt. wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

10 395.00 Providing and fixing M.S. grills of required pattern to wooden

Kg. frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Plain Grill. 104.04 Kg.

11 6.50 Providing and fixing 35 mm thick shutters for Doors, windows

Smt. and clerestory windows including Indian teak wood frames

cm x 7 cm. size including anodized alluminium fixtures and

fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

12 76.50 Providing and laying polished Kota stone slab flooring over

Smt. 20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) jointed with grey cement slurry including

rubbing and polishing etc. complete. (B) 30 mm thick 1029.22 Smt.

UMARGAM MUNICIPALITY, UMARGAM

Renovation of First Floor of Existing 8.50 MLD Water Treatment Plant at Power House Water

Works at Umargam

Item Qty. Description Total Unit Amount

1 2906.00 Removing dry or oil bound distemper by washing and

Smt. scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete. For

Outside & Inside. 11.30 Smt.

2 291.00 Removing and scraping of old detroited plaster of any

Smt. thickness from wall/rcc member including stacking of

serviciable material and disposal of unserviciable from site

of work with all lead and lift.

3 59.50 Painting Two coats (Including priming coat) on previously

Smt. printed steel and other metal surface with synthetic enamel

paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

4 98.00 Providing 15mm thick cement plaster in single coat on

Smt. rough (similar) side of single or half brick walls for interior

plastering upto floor two level and finished even smooth in

cement mortar 1:4 (1 cement : 4 sand) with floating coat of

neat cement slurry.

5 18.00 Providing 10mm thick cement plaster in single coat on

Smt. ceilings and soffits of stairs for interior plastering and

finished even and smooth in. Cement Mortar 1:4 (

Cement : 4 Sand) and finishing with a floating coat of neat

cement slurry for above floor two level.

6 29.50 Providing 20mm thick sand faced cement plaster on wall up

Smt. to height 10 metres above ground level consisting of 12mm

thick backing coat of C.M. 1:3 (1 Cement ; 3 Sand) and

8mm thick finishing coat of C.M. 1:1 (1 Cement : 1 Sand)

Item Qty. Description Total Unit Amount

7 1960.00 Distempeing (Three coats) with oil bound washable

Smt. distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade,

over and including a priming coat with alkali resistance

primer of approved brand after thoroughly brushing the

surface and other foreign matter and also including

preparing the surface even and sand parpered smooth.

8 358.00 Distempeing (Three coats) with oil bound washable

Smt. distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade,

over and including a priming coat with alkali resistance

primer of approved brand after thoroughly brushing the

surface and other foreign matter and also including

preparing the surface even and sand parpered smooth. on

Ceiling & Sloping Roofs.

9 588.00 Finishing wall with weather proof exterior emulsion paint on

Smt. wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

10 335.00 Providing and fixing M.S. grills of required pattern to

Kg. wooden frames of windows etc. with M.S. flats at required

spacings and frame alround, square or round bars with

round headed bolts and nuts or by screws (A) Plain Grill.

11 6.50 Providing and fixing 35 mm thick shutters for Doors,

Smt. windows and clerestory windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete.

(ii) Fully Panelled. 5337.90 Smt.

12 76.50 Providing and laying polished Kota stone slab flooring over

Smt. 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) jointed with grey cement slurry

including rubbing and polishing etc. complete. (B) 30 mm

thick 1029.22 Smt.

UMARGAM MUNICIPALITY, UMARGAM

SITC of Activated Filter Media Technology, Mechanical & Ancillary Works for Existing 8.50 MLD WTP at Power house

Head Water Works at Umargam.

Sr. Description Quantity Rate Per Amount

1 Fabrication, supply, erection and commissioning of activated filter

media vessel, out of IS 2062 material as per ASME standard, Size -

2200 mm Dia x 2000 mm HOS. Shell 8 mm thickness, Dish 10 mm

thickness, Manhole - 500 mm diameter with Inlet nozzle 150 NB and

outlet nozzle 200 NB, and air vent. Complete with 4 Nos of legs &

Lifting Hooks. Vessel will be painted by Epoxy paint from Inside and

Outside, Piping will be MSEP out of ERW Class C pipe with flanges

and 5 Nos of valves and complete piping. Vessel design as per

ASMR Sec XIII (Pressure vessel code). Joints to be tested with

radiography. Underdrain system of wedge wire of 350 -600 micron

size opening. 6.00 600000.00 No.

2 Feed and Backwash pump - Centrifugal end suction pump for

flowrate upto 270 m3/h with a maximum operating pressure at

bar. With three phase squiirrel cage induction motor of IE2 or IE

efficiency and IP55 enclosure. 4.00 2000000.00 No.

3 Activated filter media of Dryden Aqua make or equivalent of size

between 0.45 mm to 5 mm as per the requirement. 28500.00 180.00 Kg

4 120 to 140 Square meter Civil Works comprises of Surveying, Soil

Investigation, Planning, Designing, construction of Filter house

shade for drinking water filteration plant. It coveres a M40 grade

PCC/ concrete includgin foundation for the vessel, pumps, with GI

sheet roof to accomodate the filterplant. 140.00 5000.00 Smt

5 Control panel for Pump Motors, control desk for AFM plant, local

start stop station for individual equipment, along with supply, laying,

dressing and terminaton of all power, control cables, for all item

including accessories of Junction box, cable trays and harnesses

including earthing and earthing pits. 4.00 120000.00 No.

6 Intrumentation with electromagnetic flowmeter, ph meter, ORP

meter, high and low level switch with pressure gauges with panel and

automation 1.00 1500000.00 No.

7 Interconnecting piping APVC Schdule 80 or MS pipe with epoxy paint

of sizes as per reqruiement, heavy grade with 20 meter boundry limit

on the feed and supply side. With Excavation, RCC below the pipe

and refilling. 1.00 1000000.00 No.

8 Online self cleaning Disc Filters with 100 micron nominal filteration

capable of handling 200 m3/hr of flow rate with internal backwash

mechanism with filter housing, manifold, disc element, valves and

9 Butterfly valve pneumatic or eletrically operated compatible with the

vessel design for the automated functioning of the filteration system

Sr. Description Quantity Rate Per Amount

10 The electrical scope includes the provision of a control panel for

pump motors, a PLC-based control desk, and local start-stop

stations. It also covers installation of a Power Distribution Board

(PDB) with metering and protection, along with VFDs for energy-

efficient operation. The work includes supply, laying, dressing, and

termination of all power and control cables with necessary

accessories such as junction boxes, trays, and cable harnesses,

ensuring proper tagging and labeling. Surge protection devices

(SPDs) shall be provided, and internal/external LED lighting along

with ventilation systems will be installed to ensure operational safety.

A complete earthing system, including pits and conductors, shall be

designed as per IS/IEC standards. The system shall be compatible

with both LT and HT supply configurations based on site

11 Clariflocculator Repairing works with MS Bridge, Clarifier, MS bridge,

with plate platform 1 mtr wide, scrapers, incudign rails, ad wheels

rotation, trolly, central bearing, as per design and supplying an

commission motor gear 4 box (03 motor), 3 LPE quoting out side

layers, with necessary materials. Out side of ms pipe, sitc of LV MCC

Panel, operating on 03 phase, four wire 415 walts, (LED type

indication lamp) SITC of LV MCC Panel totally enclosed, dust &

bermin proof, indoor type, minimum degree of protection - IP 52 as

per IS: 2147, operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral

effectively grounded, with instrumentation compartments

accomodating LED type indicating lamps, control contactors as per

IS: 13947, CT of accuracy class- I as per IS: 2705, relays, meters &

control MCBs, air insulated electrolitic grade Aluminum bus bar for

three phase & neutral system with incomming breaker-

microprocessor based Air Circuit Breakers (electrically operated

drawout type)/ air break fixed type MCCB with trip free mechanism,

current limiting type as per IS: 8828, Motor Contractor (as per type -2

coordination), Overload Relay with built-in single phasing prevention

feature & auxiliary feeders as per SLD drawings, momentary contact

type push buttons, equipment fittings, bus bars, cable boxes, cable

gland, incoming & ougoing cable connection for 1100V grade,

Aluminium/ Copper conductor XLPE / PVC insulated & PVC

sheathed armoured cable, 10% spare terminals, power wiring using

1100V grade, FRLS insulated copper conductor wires conforming to

IS: 694 & 8130, cable compartments / alleys of minimum 300 mm

size, GI / Al earth bus bar for entire length. MCC shall be fabricated

from cold rolled, coled annealed (CRCA) sheet steel & minimum

thickness of various members shall be as follows: Base Frame /

Channel / Gland Plate: 3 mm, Load Bearing Members / Doors: 2 mm

and Internal Partitions: 1.6 mm. Auto Transformer Starter with

MCCB, Contactor, O/L relay, cast resin type CT, Digital MFM,

Analogue Ammeter, SPP, Timer etc. Size - 700 x 450 x 800. For

HP Panel. & Providing, installing & commissioning Air agitation

system including Blowers(40 HP), piping and valve arrangement etc,

as per design. FOR ALL BEDS. Civil Work included inside plaster

with waterproofing.

UMARGAM MUNICIPALITY, UMARGAM

Construction of Proposed Security Cabin at Power House Water Works at Umargam

Qty. Description Unit Amount

1 34.00 Excavation for Foundation upto 1.5 m. Depth including sorting out

Cmt. and stacking of useful materials and disposing of excavated stuff

upto 50 Meter lead (A) (loose or soft soil) 117.08 Cmt.

2 6.00 Excavation for Foundation from depth 1.5 m. to 3.0 m. including

Cmt. sorting out and stacking of useful materials and disposing of

excavated stuff upto 50 Meter lead (A) (loose or soft soil). For

column. 129.81 Cmt.

3 29.00 Filling available excavated earth (excluding Rock) in trenches. Plinth,

Cmt. sides of foundations etc. in layers not exceeding 20cm. In depth

consolidating each disposited layer by ramming and watering.

4 13.00 Filling in foundation and plinth with murrum or selected soil in layers

Cmt. of 20cm thickness including watering, ramming and consolidating etc.

complete. 289.06 Cmt.

5 14.00 Applying General insecticide pest control treatment to floors, cup

Smt. boards etc. including labour material etc. complete. Using

Heptachloride 20 EC. As per 6113_pests constructions weight

percent is recommended one litre chemical emulsion dillute with

liter of water will give. total dillute concentration will be 40 litre

inclusive of one litre chemical emulsion application 0.5 litre chemical/

sqm of surface is recommended as per IS. 89.28 Smt.

6 5.75 Providing and laying cement concrete 1:3:6 (1 Cement, 3 coarse

Cmt. sand, 6 hand broken stone aggregates 40mm nominal size) and

curing complete excluding cost of formwork in Foundation and Plinth.

7 6.50 Providing and Laying controlled cement concrete M-250 and curing

Cmt. complete, including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Column footings. 4672.26 Cmt.

8 1.50 Providing and laying controlled cement concrete M-250 and curing

Cmt. complete including the cost of formwork But Excluding the cost of

reinforcement for reinforced concrete work in Column upto Plinth

Level having any cross section area. 6964.96 Cmt.

9 2.00 Providing and Laying controlled cement concrete M-250 and curing

Cmt. complete, including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in Columns having any

cross section area upto floor two level. 7966.88 Cmt.

10 2.00 Providing and laying controlled cement concrete M-250 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Ground Beam having

any cross section area. 5831.74 Cmt.

11 0.75 Providing and laying controlled cement concrete M-200 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in coping.

12 1.00 Providing and laying controlled cement concrete M-200 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Lintel/Chajjas for all

floor. 7497.23 Cmt.

13 2.75 Providing and laying controlled cement concrete M-200 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Slab having any

thickness for all floors. 6414.51 Cmt.

14 2.00 Providing and laying controlled cement concrete M-200 and curing

Cmt. complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Beams having any

cross section area for all floors. 6230.69 Cmt.

2650.00 Providing ISI Mark TMT Bar Fe-500 Reinforcment for R.C.C work

Kgs. including bending, binding and placing in position etc. complete for all

Floors. 76.21 Kg.

16 4.00 Providing and Laying brick work using common burnt clay building

Cmt. bricks (Conventional)having crushing strength not less than

Kg./Sq.Cm in foundation and plinth in Cement Mortar. (1:6) (1

Cement : 6 fine sand)- (A) Conventional. 4021.02 Cmt.

17 11.00 Providing and Laying Brick work using common burnt clay building

Cmt. bricks (Conventional) having crushing strength not less than

Kg./Sq. Cm. in Super Structure Above Plinth level in Cement Mortar

(1:6) (1 Cement : 6 fine sand) etc. complete for any Height. 4295.99 Cmt.

18 2.50 Providing and fixing 35mm thick flush door shutters, solid core

Smt. construction with frame of first class hardwood with cross band and

face veneer or plywood face panels, including anodised alluminium

butt hinges with necessary screws. (B) Non-decorative type and

block board core anodised alluminium butt hinges in flush door

shutters. 1797.77 Smt.

19 5.50 Providing and fixing window having extruded alluminium color powder

Smt. coated section frame main outer size 95.00mm x 24.00mm x

1.17mm (of jindal Section no: 2459 @ wt. 0.738 Kg/Rmt.), horizontal

three track member size 92.0 mm x 31.75mm x 1.30mm (of jindal

Section no: 8688, @ Wt. 0.1.07Kg./Mt.), vertical member of size

92mm x 31.75mm x 1.50mm (of jindal section no: 8933@ Wt.

Kg/mt.) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal section no: 8947@ Wt. of 0.456 Kg./Mt)

vertical member of size 40mm x 18mm x 1.29mm (of jindal Section

No : 8949, @ Wt. 0.456 Kg/mt. with 5mm thick transparent bronze

colour tinted float glass with powder coated alluminium fittings &

fixtures and transperent silicon sealent glass fixing to frame as per

details etc. Complete for Window. 1591.87 Smt.

20 265.00 Providing and fixing M. S. grills of requried pattern to wooden frames

Kgs. of window etc. with M. S. flats at requried spacings and frame alround

square or round bars with round headed bolts and nuts or by screws.

(B) Plain Grills. 104.04 Kg.

21 7.50 Applying Priming Coat on new steel and other metal surface by

Smt. throughly cleaning, oil, grease and scoured with brushes fine steel

wood, scrapers and sand paper with ready mixed priming paint

brushing red lead and Painting two coats with synthetic enamel paint,

brushing to give an even shade including cleaning the surface of all

dirt, dust and other foreign matter. 99.99 Smt.

22 40.50 Providing 15mm thick cement plaster in single coat on brick/concrete

Smt. wall for interior plastering and finished even and smooth in cement

mortar 1:4 (1 cement : 4 sand) and finishing with a floating coat of

neat cement slurry upto floor two level. 201.40 Smt.

23 13.50 Providing 10mm thick cement plaster in single coat on ceilings and

Smt. soffits of stairs for interior plastering and finished even and smooth in.

Cement Mortar 1:3 ( 1 Cement : 3 Sand) and finishing with a floating

coat of neat cement slurry for all floors. 201.87 Smt.

24 95.50 Providing 20 mm thick sand faced cement plaster on wall upto height

Smt. 10 meters above ground level consisting of 12mm thick backing coat

of C.M 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C.M

1:1 (1 cement : 1 sand) etc. complete. 300.66 Smt.

25 54.00 Applying two coats of Birla (White Cement based) or Asian acrylic

Smt. lappy (putty) or equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand Papered smooth. 40.59 Smt.

26 41.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface free from other foreign matter and also including

preparing the surface even and sand papered smooth. 100.56 Smt.

27 14.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on Ceiling &

Sloping Roof surfaces to give and even shade over and including a

primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and free from other foreign

matter and also including preparing the surface even and sand

papered smooth. 111.86 Smt.

28 95.50 Finishing wall with Weather Proof Acrylic Exterior Emulsion Paint on

Smt. wall surface (two coats) to give and required shape even shade and

of approved brand and manufacturer after throughly brushing the

surface to remove all dirts, and remians of loose powdered materials

etc. complete. 114.53 Smt.

29 2.50 Providing and Laying 25mm thick Polished Kota stone slab in risers

Smt. of steps, dedo and pillar laid on 10mm thick cement mortar 1:3 (1

Cement : 3 Coarse Sand) and jointed with grey cement slurry

including rubbing and polishing etc. complete. 1089.67 Smt.

30 13.50 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:6 (1 Cement

: 6 Coarse Sand) and jointed with colour cement slurry including

finished with flush pointing and cleaning the surface etc. complete.

For Flooring 1404.64 Smt

31 1.50 Providing and laying 24"x24" Vitrified 8 mm to 10mm thick tiles

Smt flooring over 20 mm (average) base of cement mortar 1:6 (1 Cement

: 6 Coarse Sand) and jointed with colour cement slurry including

finished with flush pointing and cleaning the surface etc. complete.

For Skirting 1404.64 Smt

32 5.50 Providing and Laying 25mm thick Marble Stone slab flooring over

Smt 20mm (avg.) base of cement mortar 1:6 (1-cement : 6 coarse sand)

laid and jointed with gray cement slurry including rubbing and

polishing complete. For Windows Seal. 2090.25 Smt

33 1.10 Filling on Terrace with brick bats chhara in layers of 20cm. Thickness

Cmt. including watering, ramming and consolidating etc. complete.

34 13.50 Providing and Laying Broken China Mosaic flooring for Terrace using

Smt 12mm Broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar cream out up

to surface using white cement including rounding off junctions and

extending them up to 15cm long the wall, clearing with water and

oxailic acid etc. as directed. 747.28 Smt

UMARGAM MUNICIPALITY, UMARGAM

Construction of CC Road at Power House Water Works at Umargam

Qty. Description Unit Amount

1 224.00 Box cutting the road surface to proper slope and camber for

Cmt. making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto

50Mt.lead. 104.04 Cmt.

2 84.00 Construction of Granular Sub Base Of 150 mm thickness by

Cmt Providing Coarse Graded Machine crushed B.T. Material

Satisfying MORTH Specification of Grading II (B.T. Stone

Agreegate 53 mm to 2.36 mm Below - 20%) Including spreading

in unifrom layer with motor grade on prepared surface, mixing

by mix in place method with rotovator at OMC an Compacting

with Vibratory Roller to Achieve the desired density etc.

complete. 857.77 Cmt

3 56.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3-

Cmt coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth. 3005.76 Cmt

4 84.00 Providing and laying Controlled cement concrete M250 (1:3:6)

Cmt. and curing complete excluding the cost of reinforcement for

R.C.C work in Road by Trimix method by providing and Fixing

'C' channels of 75mm x 75mm as per required level slope and

thickness of concrete road levalling of placed concete with

surface vibrator finishing the surface with power floater and

trowel ligh brooming on the surface including providing and

filling expansion joint having size 20mm x 20mm as per

manufactures specification and making construction joint 3mm x

20mm by using concrete cutter machine etc. complete as

directed. 4849.01 Cmt.

5 2100.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work

Kg. including bending, binding and placing in position complete.

UMARGAM MUNICIPALITY, UMARGAM

PROVIDING, LOWERING, LAYING & JOINTING OF RCC NP3 - 600MM DIA PIPE FOR OVER FLOW & WASHOUT

LINE TO EXISTING CHAMBER AT POWER HOUSE WATER WORKS AT UMARGAM.

TOTAL LENGTH 120.00 MTR.

Item Qty. Description Total Unit Amount

1 352.00 Excavation for pipe line trenches for water supply, sewerage line, manhole

Cmt etc. all with shoring and struting if required as per required gradient and

line including safety provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete for all lifts

and strata as specified. In all sorts of soil and soft murrum. Upto 1.50 Mt.

Depth. 102.35 Cmt

2 199.00 Excavation for pipe line trenches for water supply, sewerage line, manhole

Cmt etc. all with shoring and struting if required as per required gradient and

line including safety provisions using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete for all lifts

and strata as specified. In all sorts of soil and soft murrum. From 1.50 to

3.00 Mt. Depth. 112.70 Cmt

3 485.00 Refilling the pipeline trenches incl. ramming, watering, consolidating

Cmt. desposal of surplus stuff as directed within a radius of 3 km.

4 33.00 Providing bedding incl. ramming, watering, levelling, consolidating etc.

Cmt complete as per standard and instruction of engineer incharge. As above

with required quality Sand brought from outside inclduing all lead 378.35 Cmt

5 120.00 Providing and supplying ISI Standard R.C.C. pipes (of Sulphate Resisting

Rmt Cement) in standard lengths of following class and diameter suitable for

either collar joints or rubber ring joints including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to departmental stores, stacking etc. complete. (IS -

458/ 1989). Note : One collar should be supplied with each full length plain

ended RCC pipe, cost included in rates below. One rubber ring should be

supplied with each full length socketed pipe, cost included in rates below.

600MM DIA RCC NP3 PIPES 1946.00 Rmt

6 120.00 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following

Rmt diameters in proper position, grade and alignment at all level as directed by

Engineer-in-charge including conveyance from stores to site of work,

labour, giving hydraulic testing as per ISI code.

600MM DIA RCC NP3 PIPES 262.20 Rmt

7 Providing and constructing Sewer manholes, scraper manholes and unit

house connection chamber, as per the type design in brick masonry in C.

M. 1:5 and inside and outside 20mm thick plastering in C. M. 1:3 necessary

100 mm coping with reinforcement in R.C.C.M. 200 fixing C. I. steps and

fixing manhole frame and covers (But excluding supply of manhole frame

and covers) over manholes and house connection chambers and fixing

Manhole covers (but excluding supplying of manhole covers) over scraper

manhole etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type design complete as per latest

CPHEEO manual. (excl. excavation). Manhole type "A" circular type having

inside diameter of minimum 1200 mm for depth upto 1.50m.

Extra Depth Beyond 1.0 M but upto 1.5 M Depth For "A" type manhole.

8 RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store

or at site of work precast RCC M.200 Frame & cover suitable to drainage

M.H. and as per type design & Drawing including cost of reinforcement

M.S. Angles or Flat, curing mold work etc. Heavy duty.

6.00 Frame suitable for 50cm opening of MH 1255.00 Nos

6.00 Cover suitable for 50cm opening of MH 1314.00 Nos