PROVN OF 03 SINGLE LIVING OFFICERS ACCN FOR AT MH AHMEDABAD

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : 04/LBW/STN HQ/A'BAD/2023-24/Q3 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Surface Excavation N.exc (not Exceeding) 30 Cm Deep And Averaging 15cm Deep And Getting Out In Soft/loose Soil complete all as specified and directed.

M&L for Earth Work In Excavation By Mechanical Means (hydraulic Excavator) Means Over Areas (exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5m, As Directed ( All Kinds Of Soil ) depth n.exc 1.5m complete all as specified and directed.

All as per item No 2 above, But depth exc 1.5m and n.exc 3.0m complete all as specified and directed.

M&L for Treating The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (area Of The Sub Structure In Contact With Backfill To Be Measured) complete all as specified and directed.

M&L for Treating The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface complete all as specified and directed.

M&L for Treating The Soil Along With External Perimeter Of Building At The Rate Of 2.25 Litre Of Emulsion Per Metre Of The Perimeter Wall complete all as specified and directed.

M&L for Treating The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface Area complete all as specified and directed.

M & L RCC- M-25 (design Mix) Using (20mm Graded Aggregate)for Foundation ,including rafts ,footings,foundation, beams, plinth beam ,bases for column, etc basement slabs, under-reamed piles and mass concreteas , complete all as specified and directed

M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Foundation and plinth beam complete all as specified and directed.

S&F TMT Bars 10mm dia & over of Grade Fe 500D incl cutting bending, binding& Placing in position with binding wire complete all as specified and directed.

Ditto But 5 To 10mm Dia In Stirrups, Spacers & Binders complete all as specified and directed.

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Column complete all as specified and directed.

Form Work to sides of pillars,post, struts, piers,column and stanchions Square,rectangularor polygonal for Rough Finished Surfaces Of Concrete Measured Flat For Column complete all as specfied

M&L Brickwork With Fly Ash Bricks, Straight Or Curved On Plan Exc 6m Mean Radius, Built In Cm (1:6) complete all as specified and directed.

M&L Brickwork With Fly Ash Bricks, Straight Or Curved On Plan to any radius in half brick thick wall built in Cm (1:4) complete all as specified and directed.

M & L Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For chajja complete all as specified and directed.

M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Chajja complete all as specified and directed.

M & L for Rcc- M-25 (design Mix) Using 20mm Graded Aggregate For Slab, Beam & lintel band complete all as specified and directed.

M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For beams complete in all as specified

M & L for Rcc- M-25 (design Mix) Using 20mm Graded Aggregate for slab/landing slab complete all as specified and directed.

M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Slab/Landing slab complete all as specified and directed.

M & L for Rcc- M-25 (design Mix) Using 20mm Graded Aggregate for Parapet complete all as specified and directed.

M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For Parapet complete all as specified and directed.

M & L for Rcc- M-25 (design Mix) Using 20mm Graded Aggregate for Staircase exculding landing complete all as specified and directed.

M&L for Form Work For Rough Finished Surfaces Of Concrete Measured Flat For staircase exculding landing complete all as specified and directed.

M & L 10 mm Thick 1:6 Cm Internal Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Cement) complete all as specified and directed

M & L 5 mm Thick 1:3 Cm Plaster On Ceiling. Finished Even And Smooth (without Using Extra Cement)complete all as specified and directed

M & L 15 mm Thick (10 Mm + 5 Mm 1:6 Cm) External Plaster On Fair Faces Of Walls Finished Even And Smooth (without Using Extra Lime Or Cement)complete all as specified and directed

M&L for PCC 1:3:6 Type C-0 Filling In P.s. Door Frame complete as specified and as directed

M&L for Pressed Steel Door Frame 105x60 Mm for door with one or more rebates incl necessary fittings, lugs, hinges,lock strike plate, flat iron holdfast etc complete as specified and as directed

S & F For 35mm Thickness Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides complete all as specified and directed.

S&F Mild steel work confirming to Fe -290, Gde E-165 for Hand rail , half round or other steel setion or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors , balusters nosing to steps including embedding in concrete and screwing etc wind ties for roof including embedding in concrete and screwing etc , wind ties for roof including securing bolts posts and stuts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work complete all as specified and directed

S&F 12mm thick Prelaminated Particle Board, Interior Grade, Prelaminated One Side With Decorative Choice Lamination & Other Side Balancing White Lamination, Fixed With Screws To Timber Frame Work complete all as specified and directed.

S & F Solid Pvc Door Frame Of Size 50mm X 47mm Made Out Of 5mm Plain Colour Pvc Sheet Reinforced With M.s. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing complete all as specified and directed.

S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (style) Consisting Of Frame Made Out Of M.s. Tubes For Top & Bottom Rails. M.s. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘c’ Channel Having A Pvc Sheet Strip Of 20mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.s. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing.

S&F for 200 mm long Aluminium anodised Barrel Tower Bolts complete all as specified and directed.

S&F 125mm Aluminum anodised handles complete all as specified and directed.

S&F for 150mm Aluminum alloy anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and slidingm bolts of extruded sections or cast aluminum alloy and fixeddrop bolt complete all as specified and directed.

S&F for 150mm Aluminum anodised floor door stoper complete all as specified and directed.

S&F for 100mm long MS Butt Hinges complete all as specified and directed.

S&F MS Work confirming to Fe - 290 Gde E- 165 for Such as Bands, Straps, Hold Fast, Clamps, Hooks & Similar work complete all as specified and directed.

S&F Powder Coated Aluminium (minimum Thickness Of Powder Coating 50 Micron) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/neoprene Gasket Required (fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.e. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.p. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings complete all as specified and directed.

S&F 4.0 Mm Thick Plain Sheet Glass N Exc 0.5 Sqm In Each Pane complete all as specified and directed.

S&F 4 Mm Thick frosted Sheet Glass N Exc 0.5 Sqm In Each Pane complete all as specified and directed.

S&F for wire netting of stainless steel wire 1.4mm dia And size of mesh 12mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

S&F mild steel work confirming to fe 290 Gde E-165 for framed work such as Grill , Gratings, etc with ends of bars shoulders and or forged into spikes; framed Guard bars barred iron doors ladders framed balusters walk ways Railing frame work of water tanks and similar work .

M&L for preparation new plaster surface of wall and applying two Coats Of Oil Bound Distemper Over One Coat Of 1 to2 mm (1.5mm average) thick wall care putty and one coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surface and apply three Coats Of white Wash over ceiling complete All As Specified and directed

S&F Glazed Ceramic Tiles In Vertical Surface 350x 250x 7 Mm/ 450x 350x 7mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match incl and over screed layers of mortar 10mm thick in cm 1:3 , complete all as specified and directed

M & L 75mm Thick PCC (1:3:6) Using 20mm Graded Aggregate as in plinth protecton complete all as specified and directed.

Hardcore Of Guage Exc 63mm But N Exc. 100 Mm, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rolled/rammed To A True Surface complete all as specified and directed.

M&L for App Based Polymeric Membrane Minimum Weighing 3kg/sqm And Minimum 3mm Thick Reinforced With Polyster Non Wove Fabric (wt. Not Less Than 150 Gms/sqm) Laid On Primed Surface By Torched Application Complete And Finally Finished As Per Manufacturers Instructions incl screed bed or bedding layer of mortar cm (1:4) 10mm thick for laying floor finished as in base complete all as specified and directed.

S & F Vitreous China Premium/ 1st Quality Wash Down Water Closet Wall Hung Ewc White/ Ivory/off White ( Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. ( Excluding Flushing Cistern & Flush Pipe) complete all as specified and directed.

S&F Pvc Flushing Cistern 10 Litre Capacity flushing cistern low level white colour incl PVC connection PVC flush pipe of required length complete all as specfied and directed

S&F health faucet(ABS Body) mild steel chromium plated suitable for 15mm dia bore pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed complete all as specified and directed

S&F PVC seat cover for pedestal pan , white closed pattern with flat bottom and cover and mild steel chromium plated or aluminumised hanging device complete all as directed

S&F Rotational moulded polyethylene water storage tank of 500 Litre Capacity vertical with closed top hoisted and fixed in position all as specified in SSR-I

S&F 25mm dia PVC ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed

M&L for preparation of new surfaces of walls plastered or un plastered and appying two Coats Of Cement Based Paint Over One Coat Of Wall Primer complete all as specified and directed.

M&L in preparation of new wooden surfaces over 10cm width or girth and applying two Coats Of Synthetic Enamel Paint Over A Coat Of Wooden Primer.

M&L for Virified Ceramic Tiles 10 Mm Thick (square/ Rectangular) Polished, Area Of Each Tiles Exceeding 0.36 Sqm But Not Exceeding 0.42 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match complete all as specified and directed.

M&L for Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick For Laying Floor Finishes Set In Cm (1:6) complete all as specified and directed.

M&L for Cement Concrete 25mm Thick 1:2:4 Type B0 (12.5mm Graded Aggregate) As In flooring complete all as specified and directed.

M&L for Cement Concrete 75mm Thick 1:4:8 Type D2 (40mm Graded Aggregate) As In Sub Base complete all as specified and directed.

M&L for Non - Skid Ceramic Tiles 7 To 8 Mm Thick (square/rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match

M&L for Screed Bed Or Bedding Layer Of Mortar 10 Mm Thick For Laying Floor Finishes Set In Cm (1:6) complete all as specified and directed.

M&L for Machine Cut Kota Stone Slab Flooring 20-25mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete

M&L for Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Set In Cm (1:3)

M&L for Kota Stone Slab 20-25mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointed complete all as specified and directed.

S & F Vitreous China Squatting Pan, ‘orissa’ Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (excluding Flushing Cistern And Flush Pipe) complete all as specified and directed.

S & F Vitreous China Premium/ 1st Quality Wash Down Water Closet Wall Hung Ewc White/ Ivory/off White ( Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. ( Excluding Flushing Cistern & Flush Pipe) complete all as specified and directed.

S&F CP Toilet Paper Holder complete all as specfied and directed.

S&F cast iron Nahani trap of size 75mm with grating including joinig to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified

S&F cast iron floor trap with grating of size75mm including joinig to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified

S&F Wash hand basin Vitreous China White white flat back of size 550X400mm excluding taps , waste, chain and plug and procelain stopper and including brackets complete all as specfied and directed.

S&F 15mm bore size Pillar Tap cast copper alloy with caspstan heads chromium plated Fancy type screwed down high presure with or without lettered HOT or Cold with long screwed shyanks and fly nuts screwed for iron pipe and fixed complete all as specified

S&F Bib Taps, Cast Copper chromium Plated Alloy With Crutch Or Butterfly Handle screwed down for iron pipe or for brass ferrule and fixed to 15mm bore pipe

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed

(a) 15mm bore of pipe

(b) 20mm bore of pipe

S&F brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed to 15mm dia bore pipe complete all as specified

S&F CP shower rose of 125mm size with or without swiwel joints including fixing to steel pipe or unoin complete all as specified and directed.

Surface dressing n exc 15 cm deep and getting out in soft/loose soil soil complete all as specified and directed.

Removing excavated soil exc. 250m but n.exc 500m and depositing where directed.

M&L 100mm thick PCC 1:4:8 using 40 mm graded stone aggregate as in sub base complete all as specified and directed

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in surface channel ,foundations, filling and mass concrete.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in coping including use and waste of form work.

M&L for 15mm thick rendering in CM 1:4 with water proofing compound @ 3% by weight of cement on block masonary/concrete surfaces and finished even and smooth without using extra cement.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing Excavated soils exceeding 1.5 KM but not exceeding 5 KM and depositing where directed at a level not exceeding 1.5 M above the starting point.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

S&F Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

Supply only water proofing compound.

M&L for PCC (1:3:6) type C2 ,40mm graded aggregate.,as in concrete bed to drain pipes including forming cradles after they are laid & tested for 150 mm bore for NP2 pipes.

M&L for 150mm internal dia of RCC Class NP -2 pipe laid in trenches, jointed as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FR-LS multistranded copper conductor cable 1.5 sqmm (Phase - R Y B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed modular steel terminal boxes of thickness not less than 1.2 mm covered with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators complete including making good the wall surfaces with matching colour on wall for the following

(a) One light point controlled by one switch.

(b) One ceiling/ex fan point controlled by one switch.

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on indepdendent board.

(e) One bell point controlled by one bell push.

(c) One light point controlled by two, two way switches.

M&L for Point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with suitable and required size of modular box for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F modular switch one way 6 amp 1 module all as specified and directed

S&F modular switch one way 16 amp 1 module all as specified and directed

S&F modular socket 6/16 - 2/3 pin combined 2 module all as specified and directed

S&F modular socket 6 amp 2/3 pin combined 2 module all as specified and directed

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete

S&F modular switch two way 6 amp 1 module all as approved.

S&F modular bell push, 6 amp, 1 module.

S&F bell multi music type, AC, 240 volts complete.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as specified and directed

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.

S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F LED fixture 8 watt including connection complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed.

Supplying and fixing smart single phase four wire energy meter BIS 16444:2015 (Reaffirmed 2020) marked in existing meter board/floor panels having current range 10-60 Amp,415 Volts,accuracy class 1.0

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

(a) 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

(b) 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) Single pole 6 to 32 amp.

(b) Double pole 32 amp.

S&F ceiling fans complete with blades, down rods and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point.

Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed Make : Rex Polyextrusion/Gemini/Astral

Supply & Laying ,XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25sq. mmX 4Core complete all as specified and directed.

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (3/4”) dia complete all as specified and directed.

Supply and fix Valve, globe conforming to IS 9338, 50mm (2”) dia pipe complete all as specified and directed.

S&F 25 mm dia , Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

suryabuildtechdevlopers

SNEH TRADERS

Shreeganesh Construction

RAJESH ENTERPRISE

Harsh Infrastructure