Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-Finance | ₹36.9 L | L1 | Accepted-Finance Accept |
| 2 | L2₹39.6 L+₹2.7 L (7.32%)Rejected-Finance NOT MENTIONED | ₹39.6 L+₹2.7 L (7.32%) | L2 | Rejected-Finance Reject |
| Sl No | Description | Qty | Unit | Maynak Sharma L1 | ShriBalajiEnginearingWorks L2 |
|---|---|---|---|---|---|
| 1.00 | Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge | 1,218 | Cum | 400 ₹4,87,200 Lowest | 400 ₹4,87,200 Lowest |
| 2.00Providing, laying, jointing and testing in trenches of galvanized MSERW Grtade A flanged pipes excluding cost of flanged bends of all degrees conforming to IS/ISO 3183-2007 Grade L210 or A, L245 or B as per dimensions weight and test pressure mentioned below in a random length of 4m - 6m, The M.S. flanges are to be provided 10% of total joints as per table below conforming to IS: 6392-1971 (latest upto date amendments) and welding of flanges with pipes as per IS: 816-1965 with a electrode as per IS: 814-1967 including required Nos. and size of M.S. nut and bolts as per IS: 1369-1967 and compressed asbestos fiber jointing gaskets sheet not less than 3mm thick sas per IS: 2712-1965 & 90% butt welded joints by considering minimum three layers. The welding of flanges to be done on both faces in two layers on outer face + one layer on inner face to make the joints leak proof and to the entire satisfaction of the Engineer-in-charge. The laying of pipes should be conformed to IS: 5822-1994 (earth work in trenches, MS flanges and butt welded joint to be measured and paid for seprately) . The pipe shall have zinc coating as per IS:4736 in factory latest with upto date ammendements. | |||||
| 2.01 | 200 mm dia Right bank from node1-3 Flange table-5 | 475 | Rmt | 3,500 ₹16,62,500 Lowest | 4,500 ₹21,37,500 |
| 3.00Laying, jointing and testing in trenches (to level or grade) G.I. pipes of following dia (M class) conforming to IS:1239-1990(Part - I ) (latest upto date amendments) of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4 m-6 m with plain ends and jointed with MS Flanges conforming to IS:6392-1971 (latest upto date amendments) and welding of flanges as per IS: 816-1969 with electrodes as per IS:814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00mm in thickness as per IS:2712-1998. & butt welded joints. The welding of flanges to be done on both faces in two layers on outer face & one layer on inner face to make the joints leak proof and to the entire satisfaction of the Engineer-in-Charge. The laying of Pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials upto all leads and lifts. (Earth work in trenches, welding of flanges/butt welding will be measured and paid for seperately) | |||||
| 3.01 | 40 mm dia left bank from node1-2 Flange table-17 | 600 | Rmt | 120 ₹72,000 Lowest | 150 ₹90,000 |
| 4.00Providing and welding M.S. flanges at suitable point, conforming to following tables as per IS 6392-1971 (Latest with up to date amendments) as per IS:6392-1971 (Latest with upto date amendments) and welding of MS Flanges with G.I. Pipes/ MSERW pipes in two layers on both faces to make the joint leak proof (The cost of providing and laying of G.I.Pipes/MSERW Pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrode as per IS : 814-1991 and required number of nuts & bolts conforming to IS: 1364. The thickness of gasket not less than 3.00mm conforming to IS : 2712-1998. The work shall be done as per entire satisfaction of Engineer-in-Charge within all leads and lifts | |||||
| 4.01 | MSERW pipe 200 mm dia right bank from RD 0-100 flange table -17 | 2 | Pair | 2,200 ₹4,400 Lowest | 3,500 ₹7,000 |
| 4.02 | MSERW pipe 200 mm dia right bank from RD 100-200 flange table -5 | 4 | Pair | 2,200 ₹8,800 Lowest | 3,500 ₹14,000 |
| 4.03 | G.I pipes 40 mm dia left bank frm RD-0-200 flange table-17 | 2 | Pair | 6,500 ₹13,000 Lowest | 9,000 ₹18,000 |
| 4.04 | G.I pipes 40 mm dia left bank frm RD-200-600 flange table-5 | 5 | Pair | 498 ₹2,490 Lowest | 700 ₹3,500 |
Tender Value
₹32.2 L
EMD Value
₹58,825
Closing Date
10 Jan 2025, 1:00 pmClosed
Executive ENgineer
Jal Shakti Division Rajgarh
SH P/L/J testing of MSERW pipe L/ Jointing of GI pipe in rising main providing and laying and testing of HDPE pipe in distribution system C/O RCC outlets assembly and providing and installation of centrifugal pumping machinery with allied acce
2024_HPIPH_97193_1
7712-7811 dated 30-12-2024
Open Tender
Civil Works
Item Rate
180 days
Rajgarh
Please refer Tender documents.
12 documents required · 12 mandatory
₹400
EE Rajgarh
₹58,825
Yes
17 Sept 2026
30 Dec 2024
10 Jan 2025
30 Dec 2024
10 Jan 2025
30 Dec 2024
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .