Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.3 Cr
EMD Value
₹5.3 L
Closing Date
16 Oct 2026, 7:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Chairman, The Agricultural Produce Market Committee, Lakhani
Construction work of Shop Cum Godown (29 Nos) in New R.S.No.90/2 at Sub yard Dhunsol Ta.Lakhani Dist: Vav-Tharad
353160
80/2026-2027
Open
Civil Works - Buildings
Works
Banaskantha
12 documents required · 11 mandatory · 1 optional
₹12,000
Agriculture Produce Market Committee - Lakhani
₹5.3 L
9 Oct 2026
9 Oct 2026
9 Oct 2026
16 Oct 2026
9 Oct 2026
1 Excavation for foundation upto1.5
depth including.sorting out and
stacking useful material and disposing
of the excavated stuff upto 50mt lead.
(a) Loose or soft soil 45.82 121.72 Rs/cmt
(S.O.R.P.no. 67 Item code 04001A
2 Filling available excavated earth
(excluding rock) in trenches plinth
sides of foundations etc. in layers
are not exceeding 20 cm in depth
consolidating each deposited layer
by ramming watering etc comp.
S.O.R.P.No.69, It code 4006 33.45 135.56 Rs/cmt
3 Filling in plinth with sand under floors
including watering ramming, consoli-
dating and dressing etc comp.
S.O.R.P.No.69 It code 04007A 22.45 440.35 Rs/cmt
4 Filling in foundation & plinth with murrum
or selected soil in layers of 20 cm. thickness
including watering ramming and consoli-
dating etc comp.
S.O.R.P.No.69, It code 04008A 22.45 279.28 Rs/cmt
5 Providing and laying Cement concrete
1:4:8 (1 cement :4 coarse sand:8
machine cut stone aggregate 40mm
nominal size) and curring comp.
excluding cost of formwork in.
(a) Foundation & plinth.
S.O.R.P.No.73 It code 05004A 19.45 2627.15 Rs/cmt
6 Applying general insecticide pest control
treatment to floors, cupboards etc
including labour materials etc.complete.
Using Imidacloprid 30.5 SCas Per
IS 6313 part-II( (0.075% concentration
by mass) is recommended 10.5ml
chemical diluted with 5 liters of water
application 0.5 litre chemical /Sqm of
surface is recommended as per I.S.
S.O.R.P.No.158, It code 22006 94.70 80.04 Rs/smt
7 Providing and laying Controlled cement
concrete M-200 and curing comp
excluding the cost of form work and
reinforcement for reinforced concrete
It code 05024AA
(a) Foundation footings Base of columns 6.15 3904.28 Rs/cmt
8 Providing and laying controlled cement
concrete M 200 and curing complete
excluding the cost of formwork and
reinforcement for reinforced concrete
work in © Slabs,landing, shelves,
balconies, lintels,Beams, Girders,copping
and cantilever upto floor two level.
Item code 05024CA) 27.86 4424.47 Rs/cmt
9 Providing and laying controlled cement
concrete M 200 and curing complete
excluding the cost of formwork and
reinforcement for reinforced concrete
work in (D) Columns, pillers posts,
and struts upto floor two level
Item code 05024DA) 6.57 4528.83 Rs/cmt
10 Providing and laying controlled cement
concrete M 200 and curing complete
excluding the cost of formwork and
reinforcement for reinforced concrete
work in (E) Staircase excluding
landing upto floor two level
Item code 05024EA) 1.79 5476.50 Rs/cmt
11 Providing TMT Bar FE 500/500D
reinforcement for r.c.c. work including
bending, bindings and placing in
position comp.upto floor two level.
Item code 05014C
12 Brick using common burnt clay
building bricks having crushing
strength not less than 35 kg./sq.cm.
in foundation and plinth in cement
mortor 1:6 (1 cement : 6 fine sand)
(B) Conventional
(S.O.R.P.no.86 it no.6.13 6.48 4172.60 Rs/cmt
Item code 06002BA)
13 Brick work using common burnt clay
conventional building bricks having
crushing strength not less than
kg/cm2 in super structure above floor
two level in cement mortor 1:6 incl.
(1 cement:6 fine sand)
(b) Conventional
Item code 006002BA 38.99 4451.53 Rs/cmt
Item code 006006B
14 (i) Half brick masonary in common
burnt clay building bricks having
crushing strength not less than
35 kg/sq.cm in cement mortor 1:4
(1 cement : 4 coarse sand ) in
super structure above floor two level
(B) Conventional
(S.O.R.P.no.89 it no.6.30 13.74 629.84 Rs/smt
Item code 06008A2A)+
Item code 06011BA)+
15 Providing formwork of ordinary timber
planking so as to givea rough finish
including centering shuttering strutting
and propping etc. Height of propping
and centering below supporting floors
to ceiling not exceeding 4 m and
removal of the same for in situ
reinforced concrete and plain
cement concrete work in.
(A) Foundations Footings bases of
columns etc. and Mass concrete.
Item code 09001AA) 7.13 178.61 Rs/smt
16 Providing formwork of ordinary timber
planking so as to givea rough finish
including centering shuttering strutting
and propping etc. Height of propping
and centering below supporting floors
to ceiling not exceeding 4 m and
removal of the same for in situ
reinforced concrete and plain
cement concrete work in.
(B) Flat surfaces such as soffits of
supspened floors slabs,Landings
and the like. (1) Floors etc upto
200 mm in thickness.
Item code 09001B1A) 112.15 264.60 Rs/smt
17 Providing formwork of ordinary timber
planking so as to give a rough finish
including centering shuttering strutting
and propping etc. Height of propping
and centering below supporting floors
to ceiling not exceeding 4 m and
removal of the same for in situ
reinforced concrete and plain
cement concrete work in.
(G )Coulmns, pillers posts and
struts (1) Squares Rectangular
polygonal in plan.
Item code 09001G1 82.83 315.87 Rs/smt
18 Providing formwork of ordinary timber
planking so as to givea rough finish
including centering shuttering strutting
and propping etc. Height of propping
and centering below supporting floors
to ceiling not exceeding 4 m and
removal of the same for in situ
reinforced concrete and plain
cement concrete work in.
(H )(1) sides and soffits of Beams
Beam Haunchings cantilevers
Girders Bressumers and lintels
not exceeding 1 M in Depth.
(S.O.R P. no.96 Item No.9.1 143.06 205.07 Rs/smt
Item code 09001H1.
19 Providing and fixing Rolling shutters
18 gauge of approved make made of
80mm wide M.S. laths inter-locked
together through their entire length
and jointed together at the end locks
mounted on specially designed pipe
shaft with bracket plated, guide
channels and outside locking with push -
pull operation including the cost of
hood cover and spring etc. comp.
(A) Shutters having width below 3.5 M
(S.O.R P no.115 Item code 11005A 4.81 3519.21 0.00
20 Providingand fixing M.S. Grill of
required pattern to wooden frame
of windows etc. with M.S. flats at
requiredspacing and frame alround
square or round bars with round
headed bolts and nuts or by screws
Item code 10025AA 729.21 105.18 Rs/Kg
21 Providing 15mm th plain cement plaster
in single coat on fairside brick concrete
wall for interior plastering upto floor
two level finished even and smooth in.
(ii) Cement plaster 1:4
(1 cement: 4 sand) 537.00 163.39 Rs/smt
22 20mm th sand faced cement
plaster on wall upto ht 10mt above
ground level consisting of 12mm
th backing coat of c.m. 1:3 (1cement:
3 sand ) and 8mm th finishing coat of
of c.m. 1:1(1 cement :1 sand etc comp
S.O.R.P.No.137 It code 17009 67.27 317.52 Rs/smt
23 Provide and laying Ceramic tiles 6mm
th in flooring treads of steps and landings
laid on a bed of 12mm thick cement mortor
1:3 pointing in white cement and jointed
with white cement slurry.
S.O.R.P.No.127 It code 14008BA 3.41 977.37 Rs/smt
24 Provide and laying Glazed tiles 6mm
th in skirting risers of steps and dedo
laid on a 10mm thick cement mortor
1:3 pointing in white cement and
jointed with white cement slurry
S.O.R.P.No.128 It code 14009AA
25 Provide and laying 24"x24" Vitrified
8mm thick tiles flooring
over 20mm base of cement mortor
1:6 (1 cement : coarse sand
on new surface or fixing on existing
flooring by adhasive materials including
dismentaling of exisitng flooring
and jointed with colour cement slurry
including finished with flush pointing
and cleaning the surface etc comp.
for Light shade
S.O.R.P.No.135 It code 14022A 15.34 1331.27 Rs/smt
26 Providing and laying polish cotta stone
slab flooring over 20mm (Average
base of cement mortor 1:6
(1 cement : 6 coarse sand ) laid
and jointed with gray cement slurry
mixed with pigment to match the
shade of slab including rubbing and
polishing comp.
(2'-0'' x 1'-6'' machine cut size)
Item code 14012AA 13.97 1008.79 Rs/smt
27 Providing and laying rough chiseled
dress stone flooring over 20mm (Average
base of cement mortor 1:5 including
pointing with cement mortor 1:2
1 cement : 2 stone dust etc comp.
Item code 14014AA 88.21 571.08 Rs/smt
28 Providing and laying broken chine mosaic
flooring for terrace using 12mm to 20mm
broken pieces of glazed tiles to be laid over
cement mortor 1:3 to plain or slope and to
be tempered to bring mortar crème out
upto surface using white cement including
rounding of junctions and extending them
upto 15 cm along the wall,clearing with
water and oxalic acid etc. as directed.
S.O.R.P.No.130, It code 14035 96.20 771.98 Rs/smt
29 Applying two coats of Birla or Asian
acryllic lappy (putty) and two coats of
primer of approved brand and
manufacture on new wall surface to give
an even shade including throughly brushing
the surface free from mortar dropping
and other foreign matter and sand
papered smooth.
S.O.R.P.No.146, It code 19032 537.00 40.19 Rs/smt
30 Wall painting three coats with plastic
emulsion paints of approved brand and
manufacture as per engineer instruction
on wall surface to give an
even brushing the surface free from
mortar dropings and other foreign
matter and sand papered smooth.
S.O.R.P.No.142, It code 18031 537.00 82.36 Rs/smt
31 Finishing wall with weather proof
exterior emulsion paint on wall surface
(two coat) to give an required shape and
even shade after throughly brushing
the surface to remove all dirt and
remains of loose powdered material
S.O.R.P.No.146, It code 19031 67.27 73.10 Rs/smt
32 Providing concealed electric light fittings
Moulding switch board as per point plan
and engineer instruction incl all
accesories etc comp.
S.O.R.P.No.1 Sr.No.1.1.1, A + 30.00 567.00 Rs/point
33 Applying priming coat over new steel
and other metal surface after and inclduing
preparing the surface by throughly cleaning,
oil, grease, dirt and other foreign matter and
scoured with brushes fine steel wool,
scrapers and sand paper with ready mixed
printing paint brushingred lead.
S.O.R.P.No.143, It code 19001 29.17 36.06 Rs/smt
34 Painting two coats (excluding priming
coat) on new steel and other metal
surface with synthetic enamel paint,
brushing to give an even shade incl.
cleaning the surface of all dirt dust
and other foreign etc.
S.O.R.P.No.143, It code 19005 29.17 67.89 Rs/smt
35 Providing and fixing concealed centre
points to wall ceilingand floorCPVC
(SDR 13.5 PIPE) having National
Sanitation Foundation (NSF) seal
for potable water of following dia.
nominal bore tube fittings and clamps
including making good the wall, ceiling
and floor etc comp.
S.O.R.P.no.167 item code no.
(A) 15mm dia 20.00 168.67 Rs/Rmt
36 Providing and fixing concealed centre
points to wall ceilingand floorCPVC
(SDR 13.5 PIPE) having National
Sanitation Foundation (NSF) seal
for potable water of following dia.
nominal bore tube fittings and clamps
including making good the wall, ceiling
and floor etc comp.
S.O.R.P.no.167 item code no.
(A) 20mm dia 20.00 206.73 Rs/Rmt
37 Providing and laying and jointing
in true line and level 15mm dia
U.P.V.C. Pipe (sch-40) for cold
water including fitting make
FINOLEX or equvalent as approved
by engineer in charge. Pipe shall be
fixed on the wall with the help of
clamp at every two meter C/C or
shall be concelled as direced including
necessary fittings etc. including
testing of pipe and joints and fixing
the same with adhesive solvent,
including cost of all materials.
S.O.R.P.no.168 item code no.
(A) 15mm dia 20.00 71.93 Rs/Rmt
38 Providing and laying and jointing
in true line and level 25mm dia
U.P.V.C. Pipe (sch-40) for cold
water including fitting make
FINOLEX or equvalent as approved
by engineer in charge. Pipe shall be
fixed on the wall with the help of
clamp at every two meter C/C or
shall be concelled as direced including
necessary fittings etc. including
testing of pipe and joints and fixing
the same with adhesive solvent,
including cost of all materials.
S.O.R.P.no.168 item code no.
(A) 25mm dia 15.00 90.93 Rs/Rmt
39 Providing and laying and jointing
in true line and level 32mm dia
U.P.V.C. Pipe (sch-40) for cold
water including fitting make
FINOLEX or equvalent as approved
by engineer in charge. Pipe shall be
fixed on the wall with the help of
clamp at every two meter C/C or
shall be concelled as direced including
necessary fittings etc. including
testing of pipe and joints and fixing
the same with adhesive solvent,
including cost of all materials.
S.O.R.P. no.168 item code no.
(A) 32mm dia 6.00 117.97 Rs/Rmt
40 Providing and laying and jointing
in true line and level 40mm dia
U.P.V.C. Pipe (sch-40) for cold
water including fitting make
FINOLEX or equvalent as approved
by engineer in charge. Pipe shall be
fixed on the wall with the help of
clamp at every two meter C/C or
shall be concelled as direced including
necessary fittings etc. including
testing of pipe and joints and fixing
the same with adhesive solvent,
including cost of all materials.
S.O.R.P. no.168 item code no.
(A) 40mm dia 6.00 146.65 Rs/Rmt
41 Providing and laying and jointing
in true line and level 50mm dia
U.P.V.C. Pipe (sch-40) for cold
water including fitting make
FINOLEX or equvalent as approved
by engineer in charge. Pipe shall be
fixed on the wall with the help of
clamp at every two meter C/C or
shall be concelled as direced including
necessary fittings etc. including
testing of pipe and joints and fixing
the same with adhesive solvent,
including cost of all materials.
S.O.R.P. no.168 item code no.
(A) 50mm dia 9.00 193.73 Rs/Rmt
(b)75mm dia 12.00 143.22 Rs/Rmt
(c)110mm dia 12.00 262.71 Rs/Rmt
42 Providing and fixing PVC SWR
trap IS 14735 for drain -100mm
diameter with jali of the following
nominal diameter of self cleansing
design with C.I scread down or
hinged grating including the cost of
cuttingand marking good the wall.
S.O.R.P. no.169 item code no.
(A) 100mm dia. 1.00 726.00 Rs/each.
43 Providing and fixing PVC SWR
trap IS 14735 for drain -75mm
diameter with jali of the following
nominal diameter of self
cleansing design with C.I scread
down or hinged grating including
the cost of cuttingand marking good
S.O.R.P. no.169 item code no.
(A) 75mm dia. 1.00 711.11 Rs/each.
44 Providing and fixing S.W. gully trap
with C.I grating brick masonary
chamber and water tight C.I cover
with frame of 300mmx 300mm size
(inside) with standered weight
(1) Square mouth traps
(A) 100mm x 100mm size p-type
item code no. 24006AA 2.00 1279.40 Rs/each.
45 Providing and fixing in position
cowl vent to pipe
S.O.R.P. no.163 item code no. 23006B
(B) 75mm dia 1.00 389.15 Rs/each.
46 Providing and fixing in position
cowl vent to pipe
S.O.R.P. no.163 item code no. 23006C
100mm dia 1.00 500.17 Rs/each.
47 construction brick maonary road gully
chambers 500mm x450mmx 600mm
including 500mmx450mm c.i horizontal
grating with frame etc comp.
S.O.R.P.No.174 it.no. 24.4 2.00 1997.22 Rs/each.
(item code 24013A)
48 Providing and fixing wash basin with
single hole for piller rap with c.i. or m.s.
brackets painted white including cutting
holes and making good the same but
excluding fittings (550 x400 mm)
S.O.R.P.No.164 it.no. 23.127 1.00 1511.53 Rs/each.
(item code 23018)
49 Providing and fixing c.p brass towel rail
complete with c.p.brass bracket fixed
to wooden plugs with c.p. brass screw
S.O.R.P.No.165, it.no. 23.14 1.00 610.32 Rs/each.
(item code 23025)
50 Providing and fixing screw down
bib taps of size (brass cromium
plated screw down bibtap
(item code 23028A1)
15 mm dia 5.00 184.98 Rs/each.
51 Providing and fixing piller tap
capstan head screw down high
pressure with screw snakes and
back nuts (A -15 mm dia)
S.O.R.P.No.165 it.no. 23.95 1.00 305.67 Rs/each.
(item code 23029A)
52 Providing and fixing gun mettal check
or non return full way wheel valve
S.O.R.P.No.166 it.no. 23.99 2.00 184.98 Rs/each.
(item code 23031A)
53 Providing and fixing ball cock of
approved quality as per instrction
(copper metal 25 mm dia )
S.O.R.P.No.166 item code 23037A1 1.00 131.57 Rs/each.
54 (Indian type W.C.pan) size 580 mm. (Earth work,
Bed concrete foot rests and trap to be measured
and paid for separately.)
(A) Vitreous china
(I) Long pattern white colour
item code 23009 1.00 982.23 Rs/No.
55 Providing sosh well 6'-0" dia and 20'
depth with excavation hollow brick
masonary and top cover of rough
stone b.b.c.concrete with finishing
smooth etc comp. 1.00 25000.00 Rs/No.
56 Providing and fixing C.I Man
hole cover 0.60m x 0.45m size having
weight not less than 35 kgs
S.O.R.P.No.167 item code 23038 2.00 948.68 Rs/No.
57 Supplying and fixing C.I cover
300mm x 300mm without frame for
gulley trap the weight of cover to
be not less than 4.35 kg.
(item code 24011A
58 Providing erecting and fixing double
coated sintex or equvalent PVC (ISI)
mark water tank of required capacity
each with all necessary fitings and
connectioin etc comp on terrace.
S.O.R.P.No.158 item code 22014 500.00 3.91 Rs/Ltr
Estimate cost for one Shop Cum Godown building is Rs
1% Labour cess Rs
add :- GST 18 % Rs
add :- 3 % Contigency charge amount Rs
add :- 1 % Quality Control Rs
I AGREE TO DO THE ABOVE WORK
AT THE RATE OF_______________________% ABOVE / LESS
THAN THE ESTIMATED RATES WHICH ARE COATED
IN THE TENDER COPY.
MANSUKH N. PATEL
Consulting Engineer Contractor
A.P.M.C. LAKHANI
Secretary The Chairman
A.P.M.C. LAKHANI A.P.M.C.LAKHANI
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Nivida.pdf
Schedual B.pdf
Tender Notice.pdf
Tender T and C.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .