REPAIR AND MAINT OF THE VARIOUS SUBMERSIBLE/ CENTRIFUGAL PUMPS AND MOTORS, CHLORINATION PUMPS AND STARTERS ALONG WITH MISC ITEMS, REPAIR AND REPLACEMENT OF CHLORINE DOZING PLANT FOR VARIOUS PUMP HOUSES AT AFS BAREILLY UNDER GE(AF) BAREILLY

Amount

M&L for carrying out repairs to unserviceable Chlorine granules dozing pump including replacement of unserviceable parts and testing including commissioning complete all as specified and directed by Engineer-in-Charge. (Note: Spares required and replacement shall be measured & paid separately under relevant item as supply only).

Supply only for replacement of heavy duty FRP Tank capacity 150 ltr complete all as specified.

Supply only for replacement of PVC dosing head assembly with suction and delivery adopter with non return valve for 25 LPS complete all as specified and as directed.

Supply only for replacement of dosing agitator gear box 25 LPS complete all as specified and as directed.

Supply only for replacement of plunger assembly with out PVC dosing head complete all as specified and as directed.

Supply only for replacement of PVC NRV set with glass ball for suction and delivery adopter complete all as specified and as directed.

Supply only for replacement of PVC Adopter for suction and delivery without non return valve complete all as specified and as directed.

M&L for PVC pipe of 25/20 mm dia including dismantling of old damaged pipe complete all as specified and directed.

M&L for repair/ replacement of damaged parts of dosing pump/motor with new and refixing the same with brass nut bolts complete all as specified and directed Engineer-in-Charge.

Supply only calcium based granular disinfectant (Calcium Hypo Chlorite) consisting 65%-70% Chlorine content for water treatment packed in 45 Kg drum factory sealed delivered at store yard of Engineer-in-Charge. Make:- Any brand approved by E-in-C's or any other brand whose product fulfills the parameters specified in Manual on Water Supply and treatment (Third Edition May 1999) issued by CPHEEO, Ministry of Urban Dovelopment, New Delhi.

M&L for taking out submersible pumping set 41 HP capacity of any make from bore well (60 mtr deep) connected with 7/6 stage column pipes and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault/ defective parts etc, re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections, testing & commissioning complete all as specified and as directed by Engineer-in-Charge.

All as per Item No. 11 here-in-before but pumping set of 25 HP capacity all as specified.

All as per Item No. 11 here-in-before but pumping set of 10 HP / 12.5 HP capacity all as specified. (Note for item No. 11, 12 & 13 : Repair/ replacement of various parts of pump, rewinding of motor etc shall be measured & paid separately based on fault / test report and as directed by Engineer-in-Charge)

M&L for taking out submersible pumping set 0.5/2 HP capacity of any make from bore well (30 mtr deep) connected with 3 stage column pipes and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault/ defective parts etc, re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections, testing & commissioning complete all as specified and as directed by Engineer-in-Charge. (Note: Repair/ replacement of various parts of pump, rewinding of motor etc shall be measured & paid separately based on fault / test report and as directed by Engineer-in-Charge)

Supply only for replacement of stainless steel impeller suitable for submersible pump set 41 HP capacity of any make complete all as specified.

Supply only for replacement of stainless steel impeller suitable for submersible pump set 25 HP capacity of any make complete all as specified.

Supply only for replacement of stainless steel impeller suitable for submersible pump set 10/ 12.5 HP capacity of any make complete all as specified.

Supply only for replacement of stainless steel impeller suitable for submersible pump set 0.5/ 2 HP capacity of any make complete all as specified.

Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 41 HP capacity of any make complete all as specified.

Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 25 HP capacity of any make complete all as specified.

Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 10.5/ 12.5HP capacity of any make complete all as specified.

Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 0.5/ 2HP capacity of any make complete all as specified.

Supply only for replacement of stainless steel stud with nut suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

All as per Item No. 23 here-in-before but for 25 HP capacity all as specified.

All as per Item No. 23 here-in-before but for 10/ 12.5 HP capacity all as specified.

All as per Item No. 23 here-in-before but for 0.5/ 2 HP capacity all as specified.

Supply only for replacement of thrust plate with bearing suitable for submersible pump set 41 HP capacity of any make complete all as specified.

All as per Item No. 27 here-in-before but for 25 HP capacity all as specified.

All as per Item No. 27 here-in-before but for 10/ 12.5 HP capacity all as specified.

All as per Item No. 27 here-in-before but for 0.5/ 2 HP capacity all as specified.

Supply only for replacement of bush GM suitable for submersible pump set 41 HP capacity of any make complete all as specified.

All as per Item No. 31 here-in-before but for 25 HP capacity all as specified.

All as per Item No. 31 here-in-before but for 10/ 12.5 HP capacity all as specified.

All as per Item No. 31 here-in-before but for 0.5/ 2 HP capacity all as specified.

Supply only for replacement of bush rubber suitable for submersible pump set 41 HP capacity of any make complete all as specified.

All as per Item No. 35 here-in-before but for 25 HP capacity all as specified.

All as per Item No. 35 here-in-before but for 10/ 12.5 HP capacity all as specified.

All as per Item No. 35 here-in-before but for 0.5/ 2 HP capacity all as specified.

Supply only for replacement of GM neck ring suitable for submersible pump set 41 HP capacity of any make complete all as specified.

All as per Item No. 39 here-in-before but for 25 HP capacity all as specified.

All as per Item No. 39 here-in-before but for 10/ 12.5 HP capacity all as specified.

M&L for rewinding of submersible pump set motor 41 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 42 here-in-before but for 25 HP capacity complete all as specified.

All as per Item No. 42 here-in-before but for 10/ 12.5 HP capacity complete all as specified.

All as per Item No. 42 here-in-before but for 0.5/ 2 HP capacity complete all as specified.

M&L for taking out defective block/mono block pumping set for 60 HP capacity by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil workshop for cleaning, scraping, painting, machine repair work, and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re-assembling installation, commissioning and testing complete all as specified and directed by Eng-in-charge.

All as per Item No. 46 here-in-before but for 15 HP capacity complete all as specified.

All as per Item No. 46 here-in-before but for 7.5 HP capacity complete all as specified.

All as per Item No. 46 here-in-before but for 0.5/ 3 HP capacity complete all as specified. (Note for item No. 46, 47, 48 & 49 : (i) Spare parts of pumping set shall be measured & paid separately as supply only based on faults/ test report and as directed by Eng-in-charge. (ii) Rewinding of defective motor shall be measured & paid separately.

M&L for rewinding of defective Booster/ mono-block motor set of 60 HP capacity of any make, replacement of worm out parts/ burn out winding. Rewinding with same gauge of existing wire complete and re-fitting the motor complete all as specified and directed by Eng-in-Charge.

All as per Item No. 50 here-in-before but for 15 HP capacity complete all as specified.

All as per Item No. 50 here-in-before but for 7.5 HP capacity complete all as specified.

All as per Item No. 50 here-in-before but for 0.5/ 3 HP capacity complete all as specified. (Note for item No. 50 to 53 : The quoted rate shall deemed to be included for cost of rewinding of motor set)

Supply only for replacement of pump shaft mild steel suitable for 60 HP Centrifugal pump set complete all as specified.

All as per Item No. 54 here-in-before but for 15 HP complete all as specified.

All as per Item No. 54 here-in-before but for 7.5 HP complete all as specified.

All as per Item No. 54 here-in-before but for 0.5/ 3 HP complete all as specified.

Supply only for replacement of Guide spinner complete with bush suitable for 60 HP Centrifugal pump set complete all as specified.

All as per Item No. 58 here-in-before but for 15 HP complete all as specified.

All as per Item No. 58 here-in-before but for 7.5 HP complete all as specified.

All as per Item No. 58 here-in-before but for 0.5/3 HP complete all as specified.

Supply only for replacement of Gland bush suitable for 60 HP Centrifugal pump set complete all as specified.

All as per Item No. 62 here-in-before but for 15 HP complete all as specified.

All as per Item No. 62 here-in-before but for 7.5 HP complete all as specified.

All as per Item No. 62 here-in-before but for 0.5/3 HP complete all as specified.

Supply only for replacement of Cast Iron impeller suitable for 60 HP Centrifugal pump set complete all as specified.

All as per Item No. 66 here-in-before but for 15 HP complete all as specified.

All as per Item No. 66 here-in-before but for 7.5 HP complete all as specified.

All as per Item No. 66 here-in-before but for 0.5/3 HP complete all as specified.

Supply only for replacement of Coupling set suitable for 60 HP Centrifugal pump set complete all as specified.

All as per Item No. 70 here-in-before but for 15 HP complete all as specified.

All as per Item No. 70 here-in-before but for 7.5 HP complete all as specified.

All as per Item No. 70 here-in-before but for 0.5/3 HP complete all as specified.

Supply only for replacement of Roller bearing and Ball bearing suitable for 60 HP Centrifugal pump set complete all as specified.

All as per Item No. 74 here-in-before but for 15 HP complete all as specified.

All as per Item No. 74 here-in-before but for 7.5 HP complete all as specified.

All as per Item No. 74 here-in-before but for 0.5/3 HP complete all as specified.

Supply only Orthotodoline solution in 500 ml container complete all as specified.

Supply only for replacement of PVC Strainer washer type heavy duty or Y type strainer for suction complete all as specified.

Supply only for replacement of Teflon gland square type 3mm complete all as specified.

Supply only for replacement of seal with cap complete all as specified.

Supply and lowering of mild steel column pipes heavy duty 100mm bore, 3.00 mtr long each pipe with threaded ends, fixed with two Nos mild steel flange on both end, including welding (both inside and outside) and drilling holes on flanges as per existing size/ grinding etc all as specified.

S&F in repair direct on line starter, three phase suitable for submersible pump sets up to 2 HP, 415 Volt in the LT panel board with suitable size of copper lugs/wire complete all as specified.

S&F in repair direct on line starter, single phase suitable for submersible pump sets up to 2 HP, 415 Volt, single phase in the LT panel board with suitable size of copper lugs/wire complete all as specified.

S&F for power contactor MNX 9 type, 415 volt, heavy duty, three phase suitable for star delta starter in the LT panel board with suitable size of copper wire including taking down old unserviceable contactor complete all as specified. [Make: L&T Cat No SS90721 or its equivalent in Schneider/ Siemens]

S&F in replacement of contactor TP MNX 70 including coil 230 volt complete all as specified.

S&F in replacement of contactor TP MNX 40 including coil 230 volt complete all as specified.

S&F in replacement of contactor TP MNX 25 including coil 230 volt complete all as specified.

S&F in replacement of electronic timer type ET-100, 110/240 Volt, 50 Hz complete all as specified.

S&F in replacement of O/L relay 45 to 75 Amps 3 pole, directly operated complete all as specified .

S&F in replacement of O/L relay 30 to 45 Amps 3 pole, directly operated complete all as specified.

S&F in replacement of O/L relay 20 to 35 Amps 3 pole, directly operated complete all as specified.

S&F in repairs push button unit for Star delta starter of existing make complete all as directed.

S&F in replacement of single phase preventer, 415 Volt AC, 50 Hz including replacement of internal copper wire connections for starter of suitable size inclduing testing complete all as specified.

S&F in replacement of MCCB (fixed type) 415 Volts, 3 Pole 25 KA, 100 Amps.

S&F in replacement of MCCB (fixed type) 415 Volts, 3 Pole 25 KA, 160 Amps.

S&F in repair submersible copper cable flat type three core of size 16 Sqmm complete all as specified.

S&F in repair submersible copper cable flat type three core of size 10 Sqmm complete all as specified.

S&F in repair submersible copper cable flat type three core of size 6 Sqmm complete all as specified.

S&F in repair submersible copper cable flat type three core of size 2.5 Sqmm complete all as specified.

S&F in repair LED phase indicator R, Y, B colours complete with wiring all as specified.

S&F in repair 100 mm bore hand operated cast iron butterfly valve of pressure rating PN 1.6 complete all as specified.

S&F in repair 150 mm bore hand operated cast iron butterfly valve of pressure rating PN 1.6 complete all as specified.

S&F in repair 200 mm bore hand operated cast iron butterfly valve of pressure rating PN 1.6 complete all as specified.

M&L for replacement of dual filter media from the Activated Carbon Filter, vertical, self supporting MS tank by opening the manhole cover, removing the existing unserviceable filter media, cleaning the inner surfaces with caustic soda to remove all dirt, mud etc, scrapping and painting the inner surface of the tank with two coats of food grade enamel paint and supply and filling filter media of grading as given below and as recommended by CPHEEO or any other standards complete including renewal of rusted/ corroded bolts, nuts, washers, 8mm thick top gasket etc. complete and refixing the manhole cover and testing the DM filter for the satisfactory performance complete all as directed by the Engineer-in-Charge:- (a) Fresh sand (obtained from River bed) of size (10 x 2)mm and coefficient of uniformity as approved filling in layers in the Filter Bed complete. (b) Fresh sand (obtained from River bed) of size (16 x 3)mm and coefficient of uniformity as approved filling in layers in the Filter Bed complete. (c) Fresh graded gravels of size 40 mm to 50 mm as approved, filling in layers in the Filter Bed complete. (d) Fresh graded gravel of size 12 mm to 20 mm as approved, filling in layers in the filter bed complete. (e) Fresh graded gravel of size 6 mm to 12mm as approved, filling in layers in the filter bed complete. (f) Fresh graded gravel of size 3.125 mm to 6 mm as approved, filling in layers in the filter bed complete. (g) Fresh graded gravel of size 3.125 mm to 1.562 mm as approved, filling in layers in the filter bed, complete. (h) Fresh activated Carbon of 1000 Iodine value.

Supply in replacement of gun metal fire hydrant valve of size 63 mm dia, single headed conforming to IS- 5290 including rubber gasket, worn-out bolts, nuts and washers all as specified.

Pal Engineering Services (BID ID -3465617)

M/S SATISH KUMAR JAIN (BID ID -3467025)

M/S ARORA ENTERPRISES (BID ID -3466458)

D K THUKRAL AND SONS (BID ID -3465209)

shahji contractors (BID ID -3467002)