Karnataka

Active

Works

Other Works

Providing and Fixing Commemorative Memorial Stone at Krs Brindavan garden

Cauvery Neeravari Nigam Limited

CNNL KRS Div KR Sagar | Mysuru, Karnataka

Amount: ₹2.0 CrCloses: 5 Jun 2026Due today

Tender Value

₹2.0 Cr

EMD Value

₹3.0 L

Closing Date

5 Jun 2026, 9:30 pmDue today

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Providing and Fixing Commemorative Memorial Stone at Krs Brindavan garden

Tender Information

Tender ID

299743

Reference Number

CNNL/2026-27/OW/WORK_INDENT4775/CALL-2

Tender Type

Open

Product Category

Other Works

Location

CNNL KRS Div KR Sagar

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredGST Registration Certificate

RequiredContractor Registration Certificate

RequiredAnnual Financial Turnover Certificate from CA with UDIN AND ITR of last Five years

RequiredSimilar nature of work done Certificate

RequiredWork done certificate for execution of quantities

Requiredkey persons details.

RequiredIncome Tax details

RequiredLine of credit certificate in required format

RequiredBid capacity details

RequiredThe intending bidder should furnish the communication address and contact mobile number

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.-NOT APPLICABLE

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The intending bidder should furnish the certificate of registration issued by state/ central Govt

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.

The Intending bidder are advised to visit the site of work and access the tender documents well in advance.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The tender processing fee will not be refunded

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

The requisite Earnest Money Deposit (EMD) Through ONLINE only With validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e- payment will be rejected. Under this section of qualifying criteria the tenderer should furnish capacity details / format.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in e-portal within 3 days of opening of technical Bid

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, KRS Division, Krishnarajasagara, during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

Defect liability period is THREE YEARS from the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc

The application made by the firm / company shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney shall be submitted

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority.

The intending Bidder/firm/company shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the last five financial year (2021-22 to 2025-26)

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2021-22 to 2025-26) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate.

The intending bidders are advised to visit the site of work before attending the pre- bid meeting and also before submitting the tenders.

Royalty Charges shall be recovered as per the prevailing rates by the Department of Mines and Geology & The Intending bidder should strictly follow the Department of Mines & Geology circular no. 11189-1121 Dated:26.02.2024.

The rates quoted by the contractor must be inclusive of all Taxes, etc., (including GST). The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

GST will be deducted as per the prevailing Govt Orders from time to time in running bill

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL/ Karnataka Research station, if not by any NABL accredited labs before use in this work.

The work includes all lead and lift / delift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per relevant Indian standard codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height.

Security Deposit Will be withheld till the expiry of the defect liability period.

Building and other construction workers welfare cess The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill.This component is deemed to have been included in the quoted rate / Item rate.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending payment of the work.

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Subleasing/subcontracting are liable for rejection.

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand)confirming to relevant IS specifications may be allowed during the remodeling work

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge. All specifications are as per relevant IS codes in vogue . The rates for the specification in the Schedule-B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts.

The contractor should have capacity of deploying centralized batching plant along with The transit mixture during execution of concrete works for both structures and lining.

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement.

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled as per terminiation clause in Bid document

Related to qualification condition No :2, Idle charges for men & machineries for non- progress period delayed due to any reasons will not be paid.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons.

Typo graphical errors if any will not be the ground for any claims by the contractor.

The undersigned reserves the right to either postpone or to cancel the entire process of tender.

Performance security:-Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5.00% of the contract price plus additional security for unbalanced tenders (If quoted below) in accordance with the conditions of contract.

Conditions as per bid document.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

The intending bidder/firm/company/company should have Executed in any one year the following minimum quantities of work in the last five years satisfactorily (2021-22 to 2025-26): 1.Excavation/Embankment - 405.00 Cum,2. Cement Concrete - 285 Cum, 3.Steel-11T, 4. Providing & Fixing LED light -265 Each,5.Providing & Fixing PVC Pipes -945m,6. Jet Nozzles -1No, 7.Granite-7.50 Cum, 8.UG Cables-2.00Km,9.Tiles-1670Sqm NOTE: The criteria above applies to the Individual bidder/Firm/company also. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer along with the technical bid.

Work Done Certificate

The intending bidder/firm/company should have Satisfactorily completed (at least 90% of the contract value), as prime contractor at least one similar work such as Providing and fixing Memorial stone on larger size concrete platform / providing and fixing larger size sculpture with pedestal on larger concrete platform / providing and fixing larger size sculpture on concrete platform of value not less than Rs. 101.00 Lakhs (usually not less 50% estimated value of contract during the last five financial years from (2021-22 to 2025-26). Note: The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer (The cost of completed works of previous years will be given a weightage of 10% per year based to bring them to 2026-27 level rupee price value).

Work Done Certificate

Capabilities of Vendor

List of key technical personnel required for the work is as under: 1) Civil Engineer / Diploma Holders- Civil Engineering with Min 5 years experience-1no.

Others -- Others -- Key person

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26, achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.403.00 Lakhs (usually not less than the two times estimated annual payment under this contract during the last five financial years from 2021-22 to 2025-26). Note: Audited balance sheet certified by practicing Chartered Accountant shall be furnished. (Additional weight age at 10% for each year will be given for turnover to bring it to 2026-27 price level).

Audited CA Certificate of Annual Turnover

The intending bidder/firm/company shall furnish details of liquid assets and / or availability of credit facilities of not less than Rs.61.00 Lakhs(Credit lines/letter of credit/certificates from any Nationalized banks for meeting the fund requirement etc. i(usually the equivalent of the estimated cash flow for three months in the peak construction period)

Line of Credit

Tender Capacity calculation in prescribed format

Others -- ongoing and existing commitment details as per prescribed format

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹3.0 L

Important Dates

Last Activity

27 May 2026

Published

27 May 2026

Bid Opening

6 Jun 2026

Download Ends

3 Jun 2026

Pre-Bid Meeting

1 Jun 2026

BOQ Preview

•

Providing and Fixing Commemorative Memorial Stone at Krs Brindavan garden

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles above 25 mm ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50 m to 3.50 m height. ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 (1 cement 6 coarse sand),execute the work as directed by engineer incharge. Complete with all lead and lifts a...

•

Providing, Supplying and fixing Granite stone block for commemorative memorial of first quality Chamarajanagar black granite block of size 2.00 m 2.00 m 1.50 m hand dressed to plane surface on all sid...

•

Providing, supplying, and fixing tapered commemorative memorial stone of first quality Galaxy Black granite in trapezoidal shape,of overall height 2.00 m having bottom cross-section 1.50 m 1.50 m and ...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 13 fixed and finished in line as per direction of Engineer in charge. 300 x 250 x 10...

•

Providing and laying waterproofing treatment to the roof with PU based single component elastomeric pure polyurethane based coating on new terrace/Chajjas/Sunken portion of WCBathroom, cold applied PU...

•

Chequered precast cement concrete tiles 22mm thick using marble chips of size 6mm - Light shade using white cement Complete with all lead and lifts and as directed by engineer incharge.

•

Providing and laying 20 mm thick flamed finish, anti-skid granite slabs of approved quality, machine cut to required sizes and shapes, laid to true line, level, and circular alignment in radial/concen...

•

Providing and developing lawn including scrapping and removing top soil by removing 0.15 m soil and removing unwanted plants and grass along with roots, initial transport including lead, lift, loading...

•

Providing, supplying, installing, testing, and commissioning of a fountain system in the circular memorial pond consisting of a suitable capacity submersible monoblock pump (approx. 1.0 HP) of approve...

•

Providing and planting suitable flowering plants and ornamental shrubs around the memorial pathway, shrub ring, and approach pathway, selected to suit the climatic conditions and landscape character o...

•

Providing and fixing Ashoka Stambha of approved design and proportions, made of solid cast bronze suitable for outdoor heritage installation. The Ashoka Stambha shall have a total height of 0.90 m, co...

•

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection ...

•

Supply of LED Bollard light fitting of 8W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with injection moulded...

•

Providing and fixing lawn guard fencing along the outer edge of the circular granite pathway and approach pathway to restrict entry into the lawn area, fabricated from cast iron of approved quality an...

•

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

•

Fixing charges of post top / Gate / Garden fitting / LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wiresComplete with all lead and lifts and as di...

•

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5 m length 4 dia telescopic M.S. pipe, with 2 dia 1.5 m long M.S. Bracket and are welded with suitable angle, using 6 mm thick M.S. s...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Fabricating supplying and mounting MS box made out . SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capaci...

•

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood / panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.22 / ...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120 sec setting. Complete with all lead and lifts and as d...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550/ 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing 18mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 15 (1 cement 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 13 (1 ceme...

•

Providing 6 mm cement plaster with cement mortar 13 (1 cement 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of mate...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 154892004, Alkali & fungal resistance, dirt resistance exterior paint of required ...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approvedmake and colour using acid and/or alkali resisting mortar bedding for Bathrooms Toilet Chemically exposed areas and joint...

•

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (bot...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore,execute the work as directed by engineer incharge. Complete with all lead and lifts ...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore,execute the work as directed by engineer incharge. Complete with all lead and lifts ...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

•

Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...

•

Supplying PVC ringtite pipes conforming to IS 49852000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, ...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. execute the work as directed by engineer incharge. Complete with all lead a...

•

Providing and fixing brass bib cock of approved quality 20 mm nominal bore Complete with all lead and lifts and as directed by engineer incharge.

•

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid Complete with all lead and lifts and as directed by engineer incharge.

•

Providing and fixing 100 mm sand cast Iron grating for gully trapComplete with all lead and lifts and as directed by engineer incharge.

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 16, bed concrete 150mm thick with 136, plastering...

•

Construct Brick masonry in CM 14, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 13, 12mm thick, except for the conical surface outside where the plaster th...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...

•

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement p...

•

Supplying and fixing PVC/metal conduit Deep junction box, 19/20 mm deep Junction box,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer inc...

•

Supplying and fixing PVC/metal conduit Deep junction box, 25 mm deep Junction box,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer inchar...

•

Supply and laying of under floor(concealed) race ways manufactured from1.5mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with 27...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush m,execute the work as directed by engineer incharge.ounted...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A One Way Switch,execute the work as directed by engineer incharge. Complete...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A Two Way Switch,execute the work as directed by engineer incharge. Complete...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-Stepped Fan Regulator Two ,execute the work as directed by engineer incharge....

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-16A One Way Switch,execute the work as directed by engineer incharge. Complet...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6/16A Universal Socket,execute the work as directed by engineer incharge. Com...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-RJ45/I.O Outlet Cat-6,execute the work as directed by engineer incharge. Comp...

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing boxComplete with all lead and lifts and as direct...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose,execute the work as directed by engineer incharge. Complete with all lead and lifts ...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-100 A,execute the work as directed by engineer incharge. Complete with all le...

•

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable ...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and CType curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacit...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and CType curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacit...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and CType curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacit...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase/3 ph...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole,execute the work as directed by engineer incharge. Com...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 4 pole,execute the work as directed by engineer incharge. Com...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50Hz AC with latest microcontroller based, digital readout of percentage leakage curren...

•

Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood boardComplete with all lead and lifts and as directed by engineer incharge.

•

Supplying, fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer incharge.

•

Supplying, fixing and wiring rotary selector switch suitable for Ammeter,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer incharge.

•

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer incharge.

•

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer incharge.

•

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3 phase,400/440Vgrade, for power factor improvement of rotating machineries like induction motorComplete with all le...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.CComplete with all lead and lifts and as directed by engineer incharge.

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator which are m...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.and M.S.Flat.with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.-50 x 50 x ...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete- 12 Sweep (300 mm),execute the work as directed by engineer incharge. Complete with...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input 220-240V@ 50/60Hz & Power facto...

•

Supplying, fixing, wiring, earth electrode for grounding conduits,I.C. cutouts and other equipments on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should ...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers,DG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on th...

•

GI strips for grounding connections, using necessary fixing materials as required.- 25 x 3 mm GI strip,execute the work as directed by engineer incharge. Complete with all lead and lifts and as direct...

•

Copper strips for grounding connections, using necessary fixing materials as required.- 25 x 3 mm Copper strip,execute the work as directed by engineer incharge. Complete with all lead and lifts and a...

•

Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall us...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wireComplete with all lead and l...

•

Fixing a shunt capacitor of . kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor-upto 5 kVAR,execute the work as direct...

•

Fixing all types and all capacities of 1x4 / 2x2 LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076 twin twisted PVC insulated wires, ...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Supplying of 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring str...

•

11 kV, 3 Core, XPLE HT UG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975(95 sqmm 54 gi wires -2.5 mm dia) Com...

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.Up to 3.5 x 70/95/120 Sqmm Complete with all lead and lifts and as directed by engineer incharge.

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 35 to 95 Sqmm,execute the work as directed by engineer ...

•

Making and Fixing pot head for LT Cable, Heat shrinkable Type Terminations 35 to 95 Sqmm,execute the work as directed by engineer incharge. Complete with all lead and lifts and as directed by engineer...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 14 (1 cement 4 coarse sand) including cost of all materials, labour, scaff...

•

Providing 20 mm cement plaster with cement mortar 13 (1 cement 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smoot...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 14 (1 cement 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing...

•

Providing lath plaster with cement mortar 13, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup b...

•

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and...

•

Finishing walls with textured exterior paint of required shade New work (Two coats applied @ 3.28 L/10 m) over and including priming coat of exterior primer applied @ 2.20kg/10 m to give an even shade...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water B147pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal exp...

•

Supply and Installation / Fixing / Provision of Pole box with HRCFuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Phconnections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 ...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

4775 Memorial stone KW4 - NEW.docx

Tender Document • 5.17 MB

Ready to Participate?

Download all tender documents and submit your bid

Providing and Fixing Commemorative Memorial Stone at Krs Brindavan garden

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?